Abstract
The atmospheric pressure glow discharge was used for activation of polymer materials. The discharge was generated between two plane metal electrodes covered by a glass dielectric barrier. The discharge was ignited in pure nitrogen or in mixtures of nitrogen with hydrogen or nitrogen with ammonia. Studied polymers were polyethylene and polypropylene. The surface energy of both activated and non-activated polymers was determined by means of contact angle measurements. The influence of treatment time on the surface free energy of polymers was studied.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
R. Brandenburg, K. V. Kozlov, F. Massines, P. Michael, H. Wagner: Proceedings of HAKONE VII, Greifswald (2000).
D. Trunec, A. Brablec, J. Buchta: J. Phys. D: Appl. Phys.34 (2001) 1697.
D. J. Upadhyay, Nai-Yi Cui, C.A. Anderson, N.M.D. Brown:Surface oxygenation of polypropylene using an air dielectric barrier discharge: the effect of different electrode-platen combinations; Applied Surface Science, in press.
G. Borcia, C. A. Anderson, N. M. D. Brown:The surface oxidation of selected polymers using an atmospheric pressure air dielectric barrier discharge; Applied Surface Science221 (2004) 203.
Z. Navrátil, V. Buršíková, P. St’ahel, M. Šíra, P. Zvěřina:On the Analysis of Surface Free Energy of DLC Coatings Deposited in Low Pressure RF Discharge; in proceedings of this conference.
R. J. Good:Contact Angle, Wettability and Adhesion; ed. K. L. Mittal. VSP BV, Utrecht (1993).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Šíra, M., Sťahel, P., Buršíková, V. et al. Activation of polyethylene and polypropylene in atmospheric pressure glow discharge. Czech. J. Phys. 54 (Suppl 3), C835 (2004). https://doi.org/10.1007/BF03166495
Received:
DOI: https://doi.org/10.1007/BF03166495