Abstract
The Na−K−Mg Geoindicator created by Giggenbach (1988) is convenient to use but it is still based on the empirical geothermometry equations and discrepancy for different cation geothermometers is observed. In fact, the location of the curve of “full equilibrium” is different if a different Na−K geothermometry equation is used. The difference is pronounced for temperatures lower than about 220°C. A case study on the, Zhangzhou geothermal field of SE China resulted in a reliable estimate of reservoir temperature of 150°C by the SO4−H2O pair Oxygen-18 isotope geothermometer. This has provided an example of attained equilibrium of the marine sulphate in the geothermal system in the low-medium temperature range (<150°C). A recent refinement of the theoretical geothermometry was achieved by the FixAl method, which provides the possibility to identify and solve problems such as an erroneous analytical value of Aluminium, and influence of processes such as mixing and degassing, and therefore makes it possible to reconstruct most of the “lost equilibrium” in geothermal systems.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Pang, Z. H., Wang J. Y., Application of isotope and geochemical techniques to geothermal exploration-the Zhangzhou Case, In: Proc. 1995 World Geothermal Congress, International Geothermal Association, 1995, Vol. 2: 1037–1042.
Pang, Z. H., Reed, M. H., Theoretical chemical geothermometry on geothermal waters: Problems and Methods, Geochim. Cosmochim. Acta, 1998, 62(6), 1083–1091.
Giggenbach, W., Geothermal solute equilibrium, derivation of the Na−K−Mg Geoindicator, Geochim. Cosmochim. Acta, 1988, 45: 939–410.
Pang Z. H., FixA1 method applied to Zhangzhou geothermal system, 144–153, in Advances in Solid Earth Sciences, Beijing: Science Press, 1996, 209.
Fournier, R. O., A revised equation for the Na−K geothermometer, US Geotherm. Res. council Transactions, 1979, 3: 221–224.
Arnorsson, S., Chemical equilibrium in Icelandic geothermal systems: implications for chemical geothermometry investigations. Geothermics, 1983, 12: 119–128.
Lloyd, R. M., Oxygen isotope behaviour in the sulphate-water system, J. Geophys. Res., 1968, 73: 6099–6110.
Mizutani Y., Rafter T. A., Oxygen isotopic composition of sulphates, Part 3: Oxygen isotopic fractionation in the bisulphate ion-water system, N. Z. J. Sci., 1969, 12: 54
Fouillac, C., A. M. Fouillac, et al. Sulphur and oxygen isotopes of dissolved sulphur species in formation waters from the Dogger Geothermal Aquifer Paris Basin, France, Applied Geochemistry, 1990, 5: 415–427.
Reed, M. H., Spycher, N., Calculation of pH and mineral equilibria in hydrothermal waters with application to geothermometry and studies of boiling and dilution, Geochim. Cosmochim. Acta, 1984, 48: 1479–1492.
Pang Z. H., Wang J. Y., Michelot, J. L., Reservoir temperatures of geothermal fields and residence time of thermal waters derived from isotope data on dissolved sulphate, 215–218, in: Water-Rock Interaction, 1995, 911.
Bethke, C. M. Geochemical Reaction Modelling, Oxford University Press, 1996, 397.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pang, Z. Isotope and chemical geothermometry and its applications. Sci. China Ser. E-Technol. Sci. 44 (Suppl 1), 16–20 (2001). https://doi.org/10.1007/BF02916784
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02916784