Article PDF
Avoid common mistakes on your manuscript.
Cited References
51DUW: Duwez, P., “Effect of Rate of Cooling on the Alpha-Beta Transformation in Titanium and Titanium-Molybdenum Alloys”,Trans. AIME:191, 765 (1951).
51HAN: Hansen, M., Kamen, E.L. and Kessler, H.D., “Systems Titanium-Molybdenum and Titanium-Columbium”,Trans. AIME:191, 881 (1951).
52DEL: DeLazaro, D.J., Hansen, M., Riley, R.E. and Rostoker, W., “Time-Temperature-Transformation Characteristics of Titanium Molybdenum Alloys”,Trans. AIME:194, 265 (1952).
54WEI: Weinig, S. and Machlin, E.S., “Data for One of the Martensitic Transformations in an 11 Pct Mo−Ti Alloy”,Trans. AIME:200, 1280 (1954).
55BAG: Bagaryatskii, Yu.A., Nosova, G.I. and Tagunova, G.I., “Crystallographic Structure and Properties of Omega Phase in Titanium Chromium Alloys”,Dokl. Akad. Nauk SSSR:105, 6, 1225 (1955).
57AUS: Austin, A.E. and Doig, J.R., “Structure of the Transition Phase Omega in Ti−Cr Alloys”,Trans. AIME:209, 27 (1957).
58BAG: Bagariatskii, Yu.A., Nosova, G.I. and Tagunova, T.V., “Factors in the Formation of Metastable Phases in Titanium-Base Alloys”,Phys. Dokl. Akad. Nauk SSSR:122, 593 (1958); TR:Sov. Phys. Dokl.: 3, 1014 (1958).
58GAU: Gaunt, P. and Christian, J.W., “The Crystallography of the β-α Transformation in Zirconium and in Two Titanium-Molybdenum Alloys”,Acta Metall.:7, 534 (1959).
58LOE: Loehberg, K. and Westphal, H., “Formation and Decomposition of ω Phase in Ti−V and Ti−Mo Alloys”,Z. Metallkunde:49, 449 (1958).
58SIL: Silcock, J.M., “An X-Ray Examination of the ω Phase in TiV, TiMo and TiCr Alloys”,Acta Metall.:6, 481 (1958).
58SPAa: Spachner, S.A., “Comparison of the Structure of the Omega Transition Phase in Three Titanium Alloys”,Trans. AIME:212, 57 (1958).
58SPAb: Spachner, S.A. and Rostoker, W., “Transformation Kinetics of Two Titanium Alloys in the Transition Phase Region”,Trans. AIME:212, 765 (1958).
59AGE: Ageev, N.V. and Petrova, L.A., “Breakdown of the β-Solid Solution in Titanium-Molybdenum Alloys”,Zh. Neorg. Khim.:4, 1924 (1959); TR:Russ. J. Inorg. Chem.: 4, 871 (1959).
60SAT: Sato, T., Hukai, S. and Huang, Y.C., “The Ms Points of Binary Titanium Alloys”,J. Austral. Inst. Met.:5(2), 149 (1960).
61BUN: Bungardt, K. and Ruedinger, K., “Phase Transformations in Titanium-Molybdenum Alloys”,Z. Metallkunde:52, 120 (1961).
61CRO: Croutzeilles, M., Mirand, P. and Saulnier, A., “Study of the ω Phase in Titanium Alloys by Direct Electron Micrography and Electron Microdiffraction”,C.R. Acad. Sci. Hebd.:253, 173 (1961).
61DUP: Dupouy, J.M. and Averbach, B.L., “Atomic Arrangements in Titanium-Molybdenum Solid Solutions”,Acta Metall.:9, 755 (1961).
61HAK: Hake, R.R., Leslie, D.H. and Berlincourt, T.G., “Electrical Resistivity, Hall Effect and Superconductivity of Some bcc Titanium-Molybdenum Alloys”,J. Phys. Chem. Solids:20, 177 (1961).
62KUZ: Kuz’min, A.A. and Palatnik, L.S., “Vapour Pressure of Titanium Over Ti−Mo Alloys”,Phys. Met. Metallogr.:14, 142–144 (1962).
63CHI: Chih-ming, K., Kornilov, I.I. and Pylaeva, E.N., “Equilibrium Diagram of the Aluminum-Molybdenum-Titanium System in the Region of Alloys Rich in Titanium”,Zh. Neorg. Khim.:8, 366 (1963); TR:Russ. J. Inorg. Chem.: 8, 189 (1963).
63LUZ: Luzhnikov, L.P., Novikova, W.M. and Mareev, A.P., “Solubility of β-Stabilizers in α-Titanium”,Metalloved. Term. Obrab. Met.: (2), 13 (1963); TR:Met. Sci. Heat Treat.: (2), 78 (1963).
63WOO: Wood, R.M., “Martensitic Alpha and Omega Phases as Deformation Products in a Titanium-15 pct Molybdenum Alloy”,Acta Metall.:11, 907 (1963).
64WIL: Williams, A.J., “A Study of the Constitution of the Titanium-rich Corner of the Titanium-Aluminum-Molybdenum System”, Department of Mines (Ottawa, Canada) Research Report R132, (1964).
68BLA: Blackburn, M.J. and Williams, J.C., “Phase Transformations in Ti−Mo and Ti−V Alloys”,Trans. AIME:242, 2461 (1968).
68MIY: Miyagi, M., Morikawa, M. and Shin, S., “On the Crystal Structure of ω Phase in Ti−Mn and Ti−Mo Alloys”,Nippon Kinzoku Gakkai-shi:32, 756 (1968).
69HIC: Hickman, B.S., “Omega Phase Precipitation in Alloys of Titanium with Transition Metals”,Trans. AIME:245, 1329 (1969).
69RUD: Rudy, E., “Compilation of Phase Diagram Data”, Technical Rept. AFML-TR-62-2, Part V, Wright Patterson Air Force Base (1969).
70COL: Collings, E.W. and Ho, J.C., “Physical Properties of Titanium Alloys”, Sci. Technol. Appl. Titanium Proc. Int. Conf.; R.I. Jaffee, Ed.: p 331 (1970).
70HAM: Hammond, C. and Kelly, P.M., “Martensitic Transformations in Titanium Alloys”, Sci. Technol. Appl. Titanium Proc. Int. Conf.; R.I. Jaffee, Ed.: p 657 (1970).
70HUAa: Huang, Y.C., Kaneko, H., Sato, T. and Suzuki, S., “Continuous Cooling-Transformation of Beta-Phase in Binary Titanium Alloys”, Sci. Technol. Appl. Titanium Proc. Intl. Conf.; R.I. Jaffee, Ed.: p 695 (1970).
70HUAb: Huang, Y.C., Suzuki, S., Kaneko, H. and Sato, T., “Thermodynamics of the Ms Points in Titanium Alloys”, Sci. Technol. Appl. Titanium Proc. Intl. Conf.; R.I. Jaffee, Ed.: p 691 (1970).
70JAM: James, D.W. and Moon, D.M., “Martensitic Transformation in Titanium Binary Alloys and Its Effect on Mechanical Properties”, Sci. Technol. Appl. Titanium Proc. Intl. Conf.; R.I. Jaffee, Ed.: p 767 (1970).
70KAU: Kaufman, L. and Bernstein, H.,Computer Calculation of Phase Diagrams, Academic Press, NY (1970).
70KOU: Koul, M.K. and Breedis, J.F., “Phase Transformations in Beta Isomorphous Titanium Alloys”,Acta Metall.:18, 579 (1970).
70NAR: Narayanan, G.H. and Archbold, T.F., “Comments on Phase Transformations in Beta Isomorphous Titanium Alloys”, (see [70KOU]),,Scr. Metall.: 4, 873 (1970)
70RON: Ronami, G.N., Kuznetsova, S.M., Fedotov, S.G. and Konstantinov, K.M., “Determination of the Phase Boundaries in Ti Systems with V, Nb and Mo by the Diffusion-Layer Method”,Vestn. Moskov. Univ. Fiz.:25(2), 186 (1970); TR:J. Moscow Univ. Phys.: 25(2), 55 (1970).
70WIL: Williams, J.C. and Hickman, B.S., “Tempering Behavior of Orthorhombic Martensite in Titanium Alloys”,Metall. Trans.:1, 2648 (1970).
70YUK: Yukawa, T., Ohtani, S., Nishimura, T. and Sakai, T., “Phase Transformation of Titanium Alloys by Means of Automatic Transformation Apparatus”, Sci. Technol. Appl. Titanium Proc. Int. Conf.; R.I. Jaffee, Ed.: p 699 (1970).
71HOC: Hoch, M. and Viswanathan, R., “Thermodynamics of Titanium Alloys: III. The Ti−Mo System”,Metall. Trans.:2, 2765 (1971).
71MIY: Miyagi, M. and Shin, S., “Isothermal Transformation Characteristics of Metastable Beta-type Titanium Alloys”,J. Jpn. Inst. Met.:35, 716 (1971).
71NOV: Novikov, I.I., Kasparova, O.V. and Pol’kin, I.S., “Effect of Quenching Vacancies on the Beta-Phase Transformation during Annealing of Titanium Alloys with 25Δ Molybdenum”,Strukt. Svoistva Legk. Splavov: p 45 (1971).
71PAT: Paton, N.E., De Fontaine, D. and Williams, J.C., “Direct Observation of the Diffusionless β→β+ω Transformation in Titanium Alloys”,Proc. Electron Microsc. Soc. Amer.:29, 122 (1971).
72CHA: Chandrasekaran, V. Taggart, R. and Polonis, D.H., “Phase Separation Processes in the Beta Phase of Ti−Mo Binary Alloys”,Metallogr.:5, 393 (1972).
72FED: Fedotov, S.G., Lyasotskaya, V.S., Konstantinov, K.M., Kutsenko, A.A. and Sinodova, E.P., “Phase Transformations in Alloys of the System Titanium-Molybdenum”, Nov. Konstr. Mater.-Titan Tr. Nauch. Teckh. Soveshch. Met. Metalloved. Primen. Titana 8th: p 37 (1972).
72FLO: Flower, H.M. and Swann, P.R., “In Situ Observation of a Radiation-Induced Phase Transformation”, Electron Microsc. Proc. 5th Eur. Congr. Electron Microsc.: p 570 (1972).
72HAM: Hammond, C., “Orthorhombic Martensites in Titanium Alloys”,Scr. Metall.:6, 569 (1972).
72IKA: Ikawa, H., Shin, S. and Masaki, M., “Continuous Cooling Transformation of Binary α+β and Metastable β Titanium Alloys”,Yosetsu Gakkai-Shi:41(4), 394 (1972); TR:Technol. Rep. Osaka Univ.: p 995 (1972).
72MOI: Moiseev, V.N., “Martensitic Transformation During Deformation in Titanium Alloys with a Metastable Beta-Phase”, Metalloved. Term. Obrab. Met.: (5), 18 (1972); TR:Metal Sci. Heat Treat.: (5), 391 (1972).
72RON: Ronami, G.N., Kuznetsova, S.M., Fedotov, S.G. and Konstantinov, K.M., “Determination of Phase Equilibria in Superconducting Alloys Using Electron Beam Microanalysis”,Kristall und Technik:7, 615 (1972).
72SAS: Sass, S.L. and Borie, B., “The Symmetry of the Structure of the ω Phase in Zr and Ti Alloys”,J. Appl. Cryst.:5, 236 (1972).
72WIL: Williams, D.N., Wood, R.A. and Bartlett, E.S., “Effect of Composition on the Properties of Strain-Transformable Beta Titanium Alloys”,Metall. Trans.:3, 1529 (1972).
73COL: Collings, E.W., Ho, J.C. and Jaffee, R.I., “Physics of Titanium Alloys—II: Fermi Density-of-States Properties, and Phase Stability of Ti−Al and Ti−Mo”, Sci. Technol. Appl. Titanium Proc. Int. Conf.; R.I. Jaffee, Ed.:2, 831 (1973).
73FED: Fedotov, S.G., Konstantinov, K.M., Sidorova, E.F. and Kvasova, N.F., “Transformation of Titanium-Molybdenum Martensite”,Izv. Akad. Nauk SSSR Met.: (5), 225 (1973); TR:Russ. Metall.: (5), 155 (1973).
73MOR: Morniroli, J.P. and Gantois, M., “Formation Conditions for the Omega Phase of Titanium-Niobium and Titanium-Molybdenum Alloys”,Mem. Sci. Rev. Met.: (11), 831 (1973).
73IKA: Ikawa, H., Shin, S., Miyagi, M. and Morikawa, M., “Some Fundamental Studies on the Phase Transformation from Beta Phase to Alpha Phase in Titanium Alloys”, Sci. Technol. Appl. Titanium Proc. Intl. Conf., R.I. Jaffee, Ed.: p 1545 (1973).
73WIL: Williams, J.C., “Kinetics and Phase Transformations”, Sci. Technol. Appl. Titanium Proc. Intl. Conf., R.I. Jaffee, Ed.: p 1433 (1973).
74DON: Donohue, J.,The Structures of the Elements, J. Wiley and Sons, NY (1974).
74FLO: Flower, H.M., Henry, S.D. and West, D.R.F., “The α-β Transformation in Dilute Ti−Mo Alloys”,J. Mater. Sci.:9(1), 57 (1974).
74GUS: Guseva, L.N. and Egiz, I.V., “Metastable Phase Diagram of High-Purity Titanium-Molybdenum Alloys”, Metalloved. Term. Obrab. Met.: (4), 71 (1974); TR:Met. Sci. Heat Treat.: (2), 355 (1974).
74GYS: Gysler, A., Bunk, W. and Gerold, V., “Precipitation of the Omega Phase in Titanium-Molybdenum Alloys”,Z. Metallkunde:65, 411 (1974).
75AGE: Ageev, N.V., Gukseva, L.N. and Dolinskaya, L.K., “Metastable Phases in Quenched Titanium-Molybdenum and Titanium-Vanadium Alloys and the Influence of Small Quantities of Oxygen on Them”,Izv. Akad. Nauk SSSR Met.: (4), 151 (1975); TR:Russ. Metall.: (4), 113 (1975).
75BAG: Baggerly, R.G., “Determination of Omega Phase Volume Fraction in Single Crystals of Beta Titanium Alloys”,Metallogr.:8, 361 (1975).
75CHE: Chernov, D.B. and Shinyayev, A.Y., “Calculation of the Interaction Parameters of Titanium with Vanadium, Niobium and Molybdenum”,Izv. Akad. Nauk SSSR Met.:5, 212 (1975); TR:Russ. Met.: 5, 167 (1975).
75IVA: Ivanov, A.S., Kaganovich, I.N., Makhnev, E.S. and Tomsinskii, V.S., “Phase Transformations in Quenched Titanium-Molybdenum Alloys During Heating”,Fiz. Met. Metalloved.:39(3), 564 (1975); TR:Phys. Met. Metallogr.: 39(3), 104 (1975).
75KOL: Kolachev, B.A., Mamonova, F.S. and Lyasotskaya, V.S., “Structure of Quenched Alloys of the Titanium-Molybdenum System”,Izv. VUZ Tsvetn. Metall.: (6), 130 (1975).
75RHO: Rhodes, C.G. and Williams, J.C., “The Precipitation of ω-Phase in Metastable β-Phase Ti Alloys”,Metall. Trans. A:6, 2103 (1975).
76FED: Fedotov, S.G., Konstantinov, K.M., Belyakova, P.E. and Sinodova, E.P., “Phase Transformations in Titanium-Molybdenum Alloys with (α+ω+β) and (ω+β) Structure”, I.P. Bardin Razvit. Metall SSSR: p 283 (1976).
76WHI: White, J.J. and Collings, E.W., “Analysis of Calorimetrically Observed Superconducting Transition-Temperature Enhancement in Titanium-Molybdenum (5 a/o)-Based Alloys”, AIP Conf. Proc.; Issue:Magn. Magn. Mater.; Jt. MMM-Intermag. Conf.:34, 75 (1976).
76WIL: Williams, J.C., “Precipitation in Titanium-base Alloys”, Proc. TMS-AIME Heat Treat. Comm.: p 191 (1976).
77CAH: Cahn, J.W., “The Symmetry of Martensites”,Acta Metall.:25, 721–724 (1977).
77LYA: Lyasotskii, I.V., Dyakonova, N.B. and Tyapkin, Yu.D., “Crystal Structure of Solid Solution of Transition Metals with bcc Lattices”,Dokl. Akad. Nauk SSSR:237(3), 577–580 (1977); TR:Sov. Phys. Dokl.: 22(11), 619–621 (1977).
77TER: Terauchi, S., Matsumoto, H., Sugimoto, T. and Kamei, K., “Investigation of the Titanium-Molybdenum Binary Phase Diagram”,J. Jpn. Inst. Met.:41(6), 632 (1977); TR:Technol. Rep. Kansai Univ.: 19, 61 (1978).
78BEL: Belyanin, V.A., Novikov, I.I. and Proskurin, V.B. “Internal Friction of Titanium and Titanium-Molybdenum Alloys During Allotropic Transformations”, Unutr. Trenie Met. Poluprovodn. Dielektr. Ferromagn. (Dokl. Uses. Soveshch. Mekh. Unutr. Treniya Tverd. Telakh): p 86 (1978).
78GUS: Guseva, L.N. and Dolinskaya, L.K., “Formation Conditions of Athermal Omega-Phase in Titanium Alloys with Transition Elements”,Cryst. Struc. Prop. Metal Alloys: p 59 (1978).
78LES: Lesnik, A.G., Nemoshkalenko, V.V. and Ovcharenko, A.A., “Taking into Account the Short-range Order in the Computer-aided Calculation of Phase Diagrams of Binary Alloys Not Containing Compounds”,Metallofizika:74, 18–27 (1978).
78OKA: Oka, M. and Taniguchi, Y., “Stress-Induced Products in Metastable Beta Titanium-Molybdenum and Titanium-Vanadium Alloys”,Nippon Kinzoku Gakkaishi:42(8), 814 (1978).
79DAV: Davis, R., Flower, H.M. and West, D.R.F., “Martensitic Transformations in Ti−Mo Alloys”,J. Mater. Sci.:14(3), 712 (1979).
79LEI: Leibovitch, Ch., Rabinkin, A., Ron, M. and Gartstein, E., “Mossbauer Study of Metastable Phases in Ti-3 a/o Mo Alloy”,J. Phys. Colloq.:40, C2–604 (1979).
80BRE: Brewer, L.,Molybdenum: Physico-Chemical Properties of Its Compounds and Alloys, Special Issue No.7, Unipub, NY (1980).
80LEIa: Leibovitch, Ch. and Rabinkin, A., “Metastable Diffusionless Equilibria in Ti−Mo and Ti−V Systems Under High Pressure Conditions”,Calphad:14(1), 13 (1980).
80LEIb: Leibovitch, Ch., Gartstein, E. and Rabinkin, A., “The Structural Stability and Superconductivity of Ti−Mo Alloys Under Pressure.: Part I. Structural Stability”,Z. Metallkunde:71, 438 (1980).
Author information
Authors and Affiliations
Additional information
Thermodynamic calculations have been made using computer programs generously made available by E.-Th. Henig and H.L. Lukas, of the Max-Planck Institute, Stuttgart. Federal Republic of Germany. This work was supported by Office of Naval Research funds through the Joint Program on Critical Compilations of Physical and Chemical Data coordinated by the Office of Standard Reference Data, National Bureau of Standards. Bibliography through 1980. Dr. Murray is the ASM/NBS Data Program’s Category Editor for binary titanium alloys.
Rights and permissions
About this article
Cite this article
Murray, J.L. The Mo−Ti (Molybdenum-Titanium) system. Bulletin of Alloy Phase Diagrams 2, 185–192 (1981). https://doi.org/10.1007/BF02881476
Issue Date:
DOI: https://doi.org/10.1007/BF02881476