Article PDF
Avoid common mistakes on your manuscript.
Cited References
52Rin: E. Rinck, “Allotrophic Transformations of Sr”,C. R. Hebd. Séances Acad. Sci., 234, 845–847 (1952) in French. (Crys Structure; Experimental)
53She: E. A. Sheldon and A. J. King, “Structure of Allotropic Forms of Sr”,Acta Crystallogr., 6, 100 (1953). (Crys Structure; Experimental)
56Hir: R. G. Hirst, A. J. King, and F. A. Kanda, “Ba−Sr Equilibrium Diagram”,J. Phys. Chem., 60, 302–304 (1956). (Crys Structure; Experimental)
58Sch: J. C. Schottmiller, A. J. King, and F. A. Kanda, “Ca−Sr Metal Phase System”,J. Phys. Chem., 62, 1446–1449 (1958). (Crys Structure; Experimental)
63Hal: H. T. Hall, J. D. Barnett, and L. Merrill, “Yb: Transition at High Pressure from fcc to bcc Structure”,Science, 139, 111–112 (1963). (Pressure; Experimental)
63Jay: A. Jayaraman, W. Klement, and G. C. Kennedy, “Phase Diagrams of Ca and Sr at High Pressures”,Phys. Rev., 132, 1620–1624 (1963). (Pressure; Experimental)
63Mcw: D. B. McWhan and A. Jayaraman, “Crystal Structure of Sr Metal above 35 kbar and Its Relation to Yb”,Appl. Phys. Lett., 3, 129–131 (1963) (Pressure; Experimental).
66Bru: G. Bruzzone, “Structure of Intermetallic Phases: SrCu5 and BaPd5”,Atti Accad. Naz. Lincei (Series Ottava), 41, 90–96 (1966) in Italian. (Crys Structure; Experimental)
Indicates key paper66Pet: D. T. Peterson and R. P. Colburn, “Sr−Sr Hydride Phase System”,J. Phys. Chem., 70, 468–471 (1966). (Equi Diagram, Crys Structure; Experimental; Indicates presence of a phase diagram)
Indicates key paper71Bru: G. Bruzzone, “Binary Systems of Ca−Cu, Sr−Cu, and Ba−Cu”,J. Less-Common Met., 25, 361–366 (1971). (Equi Diagram, Crys Structure; Experimental; Indicates presence of a phase diagram)
Indicates key paper80For: M. L. Fornasini and F. Merlo, “Structure of BaCu and SrCu”,Acta Crystallogr., B 36, 1288–1291 (1980). (Crys Structure; Experimental)
81BAP: “Melting Points of the Elements”,Bull. Alloy Phase Diagrams, 2(1), 145–146 (1981), for melting point of elements corrected to conform to the 1968 ITPS scale. (Equi Diagram; Compilation)
83Bru: G. Bruzzone, private communication of tabulated data of work in [71Bru], as well as of subsequent work.
83Mas: T. B. Massalski “Comment on the Al−Be (Aluminum-Beryllium) System”,Bull. Alloy Phase Diagrams, 4(3), 248 (1983).
Author information
Authors and Affiliations
Additional information
Work was supported by the International Copper Research Association, Inc. (INCRA) and the Department of Energy through the Joint Program on Critical Compilation of Physical and Chemical Data coordinated through the Office of Standard Reference Data (OSRD), National Bureau of Standards. Thermodynamic calculations were done in part with the use of the program made available to the authors by Mr. E.S.K. Menon of Carnegie-Mellon University. The thermal analysis data on which the evaluation had been primarily based were made available in tabulated form by Prof. G. Bruzzone of the University of Genoa. Literature searched through 1982. Professor Laughlin and Dr. Chakrabarti are the ASM/NBS Data Program Co-Category Editors for binary copper alloys.
An erratum to this article is available at http://dx.doi.org/10.1007/BF02887144.
Rights and permissions
About this article
Cite this article
Chakrabarti, D.J., Laughlin, D.E. The Cu-Sr (Copper-Strontium) system. Bulletin of Alloy Phase Diagrams 5, 391–396 (1984). https://doi.org/10.1007/BF02872963
Issue Date:
DOI: https://doi.org/10.1007/BF02872963