Abstract
Running-in is an initial surface and subsurface conditioning process that often occurs when sliding or rolling contact is established between two solid bodies. This article first addresses and defines the nature of running-in as it relates to steady-state sliding conditions. Running in procedures are not always given the type of systematic analysis that goes into other forms of friction and wear testing, but are often developed by trial and error. Studies of running-in are relatively rare in the literature of tribology, and they often appear with only passing mention. The concept of a running-in (break-in) map is explored. Examples of the analysis of friction traces show how they can be used systematically to study the runningin process. Running-in is found to be a property not only of the materials in contact, but also of the system in which they reside.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
P.J. Blau,Friction and Wear Transitions of Materials: Break-in, Run-in, Wear-in, Noyes Pub. (1989) p. 268.
E.J. Abbott and F.A. Firestone, “Specifying Surface Quality,”Mech. Eng., Vol. 55 (1933) pp. 569–572.
K.L. Johnson, “A review of the Theory of Rolling Contact Stresses,”Wear, Vol. 9 (1966) p. 4.
H. Czichos,Tribology, Elsevier, Amsterdam (1978) p. 163.
“Lubricants: Assembly and Running-in,”The Thomas Register, Products and Services, Vol. 6 Thomas Publishing Co. (1987) p. 10991.
G. Heinicke,Tribochemistry, Carl Hanser Verlag, Munich (1984) p. 97.
Ref. [1], p. 333.
W.C. Pike, in theTribology Handbook, M.J. Neale, ed., John Wiley and Sons, New York(1973) p. B 30.
C.F. Taylor,The Internal Combustion Engine in Theory and Practice, Vol. 2, MIT Press (1987) p. 471.
SAE Handbook, annual publication of the Soc. for Automotive Engineers, New York (1964).
M. Naylor, Cummins Engine Company, personal communication.
G.M. Milner, J. Leach, and R. Smith, “Development of an Automatic Machinery Vibration Analysis (AMVA) System,” inDetection, Diagnosis and Prognosis of Rotating Machinery, T.R. Shives and L.J. Mertaugh, eds., Cambridge U. Press (1988) pp. 237–248.
R.V. Kadyszewski, “Advanced Quantitative Debris Monitoring, Debris Data Processor—A Tool for Enhanced Weapon System R & M Readiness,” in Detection, Diagnosis and Prognosis of Rotating Machinery, T.R. Shives and L.J. Mertaugh, eds., Cambridge U. press (1988) pp. 271–279.
A. Corso and R. Adamo, “The Application of Ferrography in Monitoring Motor Oils During Engine Development,” Lubrication Engineering, Vol. 45 (9) (1989) pp. 557–564.
I.V. Kragelskii,Friction and Wear, Butterworths, Washington (1965) p. 303.
“Experimental Evaluation of the Running-in Ability of Materials,” GOST 23.215-84, State Committee for Standards, U.S.S.R. (1984).
I.V. Kragelskii, M.N. Dobychin, and V.S. Kombalov,Friction and Wear Calculation Methods, Pergamon Press, Oxford (1982) p. 297.
Author information
Authors and Affiliations
Additional information
1Research sponsored by the Office of Energy Utilization Research, Energy Conversion and Utilization Technologies (ECUT) Program, U.S. Department of Energy under contract DE-AC05-84OR21400 with Martin Marietta Energy Systems, Inc.
Rights and permissions
About this article
Cite this article
Blau, P.J. Running-in: Art or engineering?. J. Mater. Eng. 13, 47–53 (1991). https://doi.org/10.1007/BF02834123
Issue Date:
DOI: https://doi.org/10.1007/BF02834123