Abstract
Nowadays, reliability-based methods have been widely used for the safety and capacity rating of deteriorated and/or damaged bridges. This paper is intended to suggest practical reliability-based assessment models and methods for the safety assessment and capacity rating of various kinds of actual existing bridges. And the application of recently developed a new approach, called equivalent system-strength, for reliability-based capacity rating is illustrated using the data obtained from actual bridges. This paper also summarizes various approaches to reliability-based safety assessment and capacity rating, and investigates their application to various existing aged bridges. It will be systematically shown that the proposed bridge reliability models and methods could be effectively used in practice for the safety assessment and capacity rating of existing old bridges in conjunction with static and dynamic field load tests, nondestructive tests, and visual inspections.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
AASHTO (1994).LRFD Bridge Design Specification.
Bruneau, M. (1992). “Evaluation of system-reliability methods for cable-stayed bridge design.”J. Struct. Engrg., ASCE, Vol. 118, No. 4, pp. 1106–1120.
Cho, H.N. and Kim, I.S. (1991). “Importance sampling technique for the practical system reliability analysis of bridge.”Proc. of the US-Korea-Japan Trilateral Seminar, Honolulu, pp. 87–100.
Cho, H.N. (1996). “Bridge reliability experience in Korea.”Workshop on Struct. Reliability in Bridge Engrg., Univ. of Colorado at Boulder, pp. 115–126.
Cho, H.N., Choi, Y.M., and Sho, B.C. (1998). “Field load testing and reliability-based integrity assessment of segmental PC box girder bridges before opening to traffic.”Engineering Structures, Vol. 20, No. 11, pp. 948–955.
Cho, H.N. and Ang, A. H-S. (1989). “Reliability assessment and reliability-based rating of existing road bridges.”5 th Int. Conf. on Struct. Safety and Reliability (ICOSSAR 89), pp. 2235–2238.
Cho, H.N., Lee, S.J., and Lim, J.K. (1993). “System reliability-based evaluation of bridge system redundancy and strength.”Proc. of the second Korea-France Joint Seminar, Seoul, Korea, pp. 177–186.
Cho, H.N., Min, D.H., Lim, J.K., and Park, K.H. (1998). “Computer-aided monitoring and assessment system for maintenance of long span bridges.”J. Korean Society of Steel Construction, Vol. 10, No. 3, pp. 369–381.
Cho, H.N., Lim, J.K., and Choi, H.H. (2001). “Reliability-based fatigue failure analysis for causes assessment of a collapsed steel truss bridge.”Engineering Failure Analysis, Elsevier. Vol. 8, pp. 311–3245.
Ellingwood, B., Galambos, T.V., MacGregor, J.C., and Cornell, C.A. (1980). “Development of a probability-based load criterion for the American National Standard A58.”National Bureau of Standard SP-577.
Fisher, J.W. (1996). “Assessing damage and reliability of steel bridges.”Boase Lecture in Struct Engrg., Univ. of Colorado at Boulder.
Frangopol, D.M. and Curley, J.P. (1987). “Effects of damage and redundancy on structural reliability.”J. Struct. Engrg, ASCE, Vol. 113, No. 7, pp. 1533–1549.
Fu, G. and Moses, F. (1989). “Probabilistic concepts of redundancy and damage tolerability for structural system.”5 th Int. Conf. on Struct. Safety and Reliability (ICOSSAR 89), pp. 967–974.
Melchers, R.E. (1989). “Importance sampling in structural system.”Struct. Safety, Vol. 7, pp. 247–254.
Nowak, A.S. (1995). “Calibration of LRFD Bridge Code.”J. of Structural Eng., ASCE, Vol. 121, No. 8, pp. 1245–1251.
Nowak, A.S. and Yamani, A.S. (1995). “A reliability analysis for girder bridges.”Structural Engineering, Elsevier. Vol. 7, No. 3, pp. 251–256.
Nowak, A.S. and Zhou, J. (1990). “System reliability models for bridges.”Structural Safety, Elsevier, Vol. 7, No. 3, pp. 247–254.
Rackwitz, R. and Fiessler, B. (1978). “Structural reliability under combined random load sequences.”Computers and Struct. Pergamon Press, Vol. 9, pp. 489–494.
Sundararajan, C.,et al. (1995).Probabilistic Structural Mechanics Handbook, Chapman & Hall.
Tabsh, S.W. and Nowak, A.S. (1991). “Reliability of highway girder bridge.”J. Struct. Engrg., ASCE, Vol. 117, No. 8, pp. 2372–2388
Thoft-Christensen, P. and Murotsu, Y. (1986).Application of Structural Systems Reliability Theory. Springer-Verlag, Berlin Heidelberg.
Thürlimann, B. (1979). “Shear strength of reinforced and prestressed concrete-CEB approach.” Concrete Design: U. S. and European Practices.
Thürlimann, B. (1979). “Torsional strength of reinforced and prestressed concrete-CEB approach.” Concrete Design: U. S. and European Practices.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cho, HN., Choi, HH., Kim, JH. et al. An experience of practical reliability-based safety assessment and capacity rating. KSCE J Civ Eng 8, 65–73 (2004). https://doi.org/10.1007/BF02829082
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02829082