Abstract
The properties of tungsten-free hard alloys based on titanium carbide prepared from chips of various titanium alloys were studied, and the conditions for the preparation of tungsten-free alloys were optimized. The properties of TiC-based alloys prepared from chips of the VT20, VT3-1, and VT25 titanium alloys, containing V, Mo, Zr, and Al, were shown to compare well with those of commercial analogs. Nickel vaporization during vacuum sintering of the hard alloys was studied, and the sintering conditions were optimized (residual pressure in the range 10–100 Pa, reduced sintering temperature)
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Dubko, G.V.,Bezvol’framovye i malovol’framovye tverdye splavy (Tungsten-Free and Low-Tungsten Hard Alloys), Moscow: TsNIITsvetmet ekonomiki i informatsii, 1988.
Kiparisov, S.S., Levinskii, Yu.V., and Petrov, A.P.,Karbid titana: svoistva, poluchenie, primenenie (Titanium Carbide: Preparation, Properties, and Applications), Moscow: Metallurgiya, 1987.
Levinskii, Yu.V., Petrov, A.P., Kravchenko, A.F.,et al., Production of Powders of Refractory Titanium Compounds from Machine Waste,Tsvetn. Met. (Moscow), 1990, no. 5, pp. 44–46.
Ryzhonkov, D.I., Arsent’ev, P.P.,et al., Teoriya metallurgicheskikh protsessov (Theory of Metallurgical Processes), Moscow: Metallurgiya, 1989.
Kostikov, V.I. and Varenkov, A.N.,Vzaimodeistvie metallicheskikh rasplavov s uglerodnymi materialami (Reaction of Metallic Melts with Carbon Materials), Moscow: Metallurgiya, 1981.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Levinskii, Y.V., Petrov, A.P. Tungsten-free hard alloys based on titanium carbide. Inorg Mater 36, 24–27 (2000). https://doi.org/10.1007/BF02758374
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02758374