Abstract
To obtain useful data for treatment of the wastewater discharged from zinc electroplating processes, we investigated the effects of operating parameters, such as the initial concentration of dilute solution, the flow velocity and the applied voltage, on removal rate of Zn2+ in the model solutions using an electrodialysis system. Zinc ions in the solutions were effectively removed by the electrodialyzer with CMX cation exchange membranes and AMX anion exchange membranes. The initial concentration of dilute solution, the flow velocity and the applied voltage strongly affected the performance of the electrodialysis system. As the initial concentration of dilute solution, the flow velocity and the applied voltage were increased, the removal ratio was increased. The energy consumption was increased as the initial concentration of dilute solution and the applied voltage were increased, whereas the effect of the flow velocity on the energy consumption was negligible.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Aouad, F., Lindheimer, A. and Gavach, C., “Transport Properties of Electrodialysis Membranes in the Presence of Zn2+ Complexes with Cl-,”J. Membrane Science,121, 207 (1997).
Audinos, R., “Optimization of Solution Concentration by Electrodialysis,”Chem. Eng. Sci.,38, 431 (1983).
Choi, Y., “A Study of Transfer of Copper and Sulfuric Acid,” M.S. Dissertation, Yonsei University, Seoul, Korea (1987).
Cho, Y. W., “A Study of Limiting Current Density and Ionic Mass Transfer Rate of ZnSO4 in Electrodialysis,” M.S. Dissertation, Yonsei University, Seoul, Korea (1989).
Chung, S. Y., Han, M. S., Lee, C. Y., Tak, Y. and Nam, C. W., “The Effects of Acid in Recovery of Metal Ions by Electrodialysis” Preceeding of ’96 KIChE Fall Meeting, PE-26 (1996).
Hattenbach, K. and Kneifel, K., “The effect of Cell Thickness and Flow Velocity on Water-Cost in Desalination by Electrodialysis”Desalination,58, 33 (1986).
Huang, T C, Yu, I. Y. and Lin, S. B., “Ionic Mass Transfer Rate of CuSO4 in Electrodialysis,”Chem. Eng. Sci.,38,1873 (1983).
Ögütveren, U. B., Koparal, S. and Özel, E., “Electrodialysis for the Removal of Copper Ions From Wastewatef,”J. Environ. Sei. Health,A32, 749 (1997).
Peters, R. W, Ku, Y. and Bhattacharyya, D., “Evolution of Recent Treatment Techniques for Removal of Heavy Metals from IndustrialWastewaters”AIChESymposium Series,81,165 (1986).
Ramachandraiah, G., Thampy, S. K., Narayanan, P. K., Chauhan, D. K, Nageswararao, N. and Indusekhar, V. K., “Separation and Concentration of Metals Present in Industrial Effluent and Sludge Samples by Using Electrodialysis, Coulometry, and Photocatalysis,”Separation Science and Technology,31, 523 (1996).
Wisniewska, G. and Winnicki, T., “Electrodialytic Desalination of Effluents from Zinc-Coating Processes: Removal of Zn2+ and Cl- Ions from Model Solution,”Desalination,84,163 (1991).
Sistat, P., Pourcelly, G., Gavach, C., Turcotte, N. and Boucher, M., “Electrodialysis of Acid Effluents Containing Metallic Divalent Salts: Recovery of Acid with a Cation-Exchange Membrane Modifiedin situ,”J. Applied Electrochemistry,27, 65 (1997).
Gering, K. L. and Scamehorn, J. F., “Use of Electrodialysis to Removal Heavy Metals from Water,”Separation Science and Technology,23, 2231 (1988).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Choi, K.H., Jeoung, T.Y. Removal of zinc ions in wastewater by electrodialysis. Korean J. Chem. Eng. 19, 107–113 (2002). https://doi.org/10.1007/BF02706882
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02706882