Summaries
An alternative approach to the formation of resins by hydrolysis-condensation reactions has been developed and evaluated. It combines the use of inexpensive polysiloxanes and transition metal catalysts to easily modify polymers in a one-pot reaction. Polyhydridomethylsiloxane (PHMS) serves as the base polymer, and it can be cured or modified by dehydrocoupling or a combination of hydrosilylation-dehydrocoupling reactions, both catalysed by transition metal catalysts (Pt and Ru). The modified polymers are linear and contain very high mol% of Si-OH and combinations of Si-OH and Si-OR pendant groups. These groups assist the bonding to surfaces when the modified polymers are deposited as coatings. They then cure by condensation and hydrolysis-condensation reactions, catalysed by both acids and bases. The modified polymers are used for low-temperature paintlike applications, especially where ambient curing is desirable. This article discusses modifications of PHMS for coating applications and describes potential coating applications and typical coating strategies.
Résumé
Un moyen alternative d’aborder la production des résines par des réactions d’hydrolysecondensation a été mis au point et évalué. La tentative unit l’emploi de polysiloxanes peu chers aux catalysateurs de métaux transitories à l’intention de modifier facilement des polymères par une réaction dans une recipient. Polyhydridométhylsiloxane (PHMS) sert du polymère de base et il peut être durcis ou modifié par les réactions de déhydrocouplage ou une combinaison de déhydrosilyation et de déhydrocouplage tous les deux catalysés par des métaux transitoires (Pt et Ru). Les polymères modifiés sont linéaires et contiennent un pourcentage très élevé de groupements pendants de Si-OH et des combinaisons de Si-OH et de Si-OR. Ces groupements facilitent l’adhérence aux surfaces lorsque les polymères modifiés sont déposés en tant que revêtements. Là, ils durcissent par des réactions de condensation ou d’hydrolyse-condensation, catalysées à la fois par des acides ou des bases. On utilise les polymères modifiés en produits semblables aux peintures pour des applications aux températures relativement basses, surtout lorsque le durcissement à température ambiante est souhaitable. Cet article discute les modifications de PHMS pour produits de peintures et il décrit les produits de peinture eventuels et des stratégies typiques à l’égard des produits de peintures.
Zusammenfassung
Ein alternative Ansatz zu der Herstellung von Harzen durch Hydrolyse-Kondensations-teaktionen wurde entwickelt und bewertet. Es kombiniert den Gebrauch der preisgünstigen Polysiloxane und Übergangsmetallencatalysatoren um Polymere mittels einer Einziggefareaktion leicht zu modifizieren. Polyhydridomethylsiloxan (PHMS) steht also Grundpolymer und es lä t sich aushärten oder modifizieren durch Dehydrokopplung oder durch eine Konbination der Hydrosilyations-Dehydrokopplungsreaktionen, beide katalysiert von Ubergangsmetallen (Pt und Ru). Die modicizerten Polymere sind linear und srthalten ein en Hochmolekularprozentsatz von Si-OH und Kombinationender Si-OH und Si-OR Anhängergruppen. Diese Gruppen helfen dem Abbinden an Oberflächen wenn die modifizierte n Polymere also Beschichtungen hingelegt werde. Dann sie härten durch Kondensations-und Hydrolyses-Kondensationsreaktionen katalysiert durch beide Säuren und Basen aus. Die modifizierten Polymere werden zu niedrigtemperaturen Beschichtungsstoffs angewandt, vor allem wo Aushärtung bei Umgehenstemperatur ist wünschenswert. Dieser Beitrag diskutiert Modifikations der PHMS für Beschichtungsstoffsanwendungen und auch beschreibt eventuelle Beschichtungsstoffsanwendugen und auch typische Beschichtungsstoffstatiken.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
See relevant papers inSilicones in Coatings II, Proceedings of PRA Conference, Florida (1998).
Blum YD, Chen HP, MacQueen DB and Johnson SM,in Organic/Inorganic Hybrid Materials II, Mater. Res. Soc. Proceedings, L C Klien, L F Francis, M R De Guire, and J E Marks, Eds., Vol. 576 (Materials Research Society Publications, 1999), p. 281.
Blum YD and McDermott GA, US Patent 5,405,655 (1995).
Furuya M, Kizaki H, and Yamaya M, inSilicones in Coatings II (Conference Proceedings, Paint Research Association, Teddington, UK, 1998), paper 8
R H. Baney, M Iroh, A Sakakibara and T Suzuki, Chem. Rev.102, 199–236 (1995).
Blum YD and Crawford EJ, US Patent 4,952,715 (1990)
YD Blum, US Patent 5,128,494 (1992).
Blum YD and Laine RM, US Patent 5,008,422 (1991).
Blum YD and McDermott Ga, US Patent 5,639,844 (1997)
YD Blum, GA McDermott and AS Hirschon, inInorganic and Organometallic Oligomers and Polymers, JF Harrod and RM Laine, Eds. (Kluwer Academic Publishers, Dordrech, The Netherlands, 1991), pp. 161–175.
Blum YD, Crawford EJ and Platz RM, US Patent 5,162,136 (1992).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Blum, Y.D., MacQueen, D.B. Modifications of hydrosiloxane polymers for coating applications. Surface Coatings International Part B: Coatings Transactions 84, 27–33 (2001). https://doi.org/10.1007/BF02699693
Issue Date:
DOI: https://doi.org/10.1007/BF02699693