Summaries
Two-pack water-borne polyurethane coatings are a relatively new technology which promises excellent performance properties combined with a low content of volatile organic compounds (VOCs). In this paper the effects of a polymer structure of acrylic polyol dispersions on film-formation and final coating properties (pot life, hardness, gloss) are investigated. Two kinds of water-borne acrylic polyols have been investigated. Both water-borne polyols show good results in applicability, hardness and chemical stability when elevated temperatures can be used. The polyol based on a single-step synthesis route is superior in pot life, hardness and chemical stability. The low paint VOC of 130g/l indicates that this polyol already fits demands of future VOC regulations.
Résumé
Les revêtements de polyuréthane à deux composants (two pack) hydrodiluables représentent une technologie qui est relativement nouvelle et qui promet d’excellentes propriétés dans le domaine de performance. Elles ont aussi une faible teneur en VOCs.
Dans oet article les effets des dispersions d’une structure polymérique de polyol acrylique sur la formation de feuils et sur les propriétés finales du revêtement (la durée de conservation en pot, la dureté, le brillant) sont étudiés. Deux types de polyols acryliques hydrodiluables ont été investigués. Les deux polyols hydrodiluables produisent de bons résultats dans les domaines de la facilité d’application, la dureté, la stabilité chimique quand des températures élévées peuvent être employées. Le polyol qui est basé sur une route de synthèse à une étape s’est montré supérieur en ce qui concerne la durée de conservation en pot, la dureté, et la stabilité chimique. La faible teneur en VOCs du revêtement (130g/l) indique que ce polyol répond déjà aux futures exigences des règlements concernant les VOCs.
Zusammenfassung
Zweikomponenten Polyurethanlacke auf Wasserbasis sind eine relativ neue Technologie, die hervorragende Leistung mit einem geringen Lösungsmittelgehalt kombiniert. Diese Studie beschäftigt sich mit dem Effekt der Polymerstruktur von Acryl-Polyol Dispersionen auf Filmbildung und die Eigenschaften des Lackes, wie Haltbarkeit, Härte und Glanz. Zwei Arten von wasserlöslichen Acryl-Polyol Dispersionen wurden erforscht. Beide erzielten gute Ergebnisse in bezug auf Auftragbarkeit, Härte und Hitzebeständigkeit. Das Polyol, das mittels einer Einstufensynthese hergestellt wurde, zeigte bessere Haltbarkeit, Härte und Stabilität. Der geringe Lösungsmittelgehalt von 130 Gramm/Liter zeigt, daß dieses Polyol bereits für zukünftige Lösungsmittelgrenzwerte verwendbar ist.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Mirgel V, ‘New resin systems for high performance waterborne coatings, Proc 18th Int Conf of Organic Coatings Science and Technology, Athens, 6th to 10th July 1992
Hegedus C R, A G Gilinski and R J Haney, ‘Film-formation mechanism of two-component water-borne polyurethane resins’,Journal of Coatings Technology,68, 51–61, 1996
Hovestadt W, B Kliensiek and M Melchiors, Homogenes Vermischen von wässrigen 2k-Polyurethanlacken,Farbe & Lack,106, 40–4, 2000
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Billiani, J., Wilfinger, W. New low-VOC acrylic polyol dispersions for two-component polyurethane coatings. Surface Coatings International Part B: Coatings Transactions 85, 191–195 (2002). https://doi.org/10.1007/BF02699508
Issue Date:
DOI: https://doi.org/10.1007/BF02699508