Summaries
An acrylic/polyester system has been introduced for powder coatings as an altemative system to TGIC.
In a typical polyester/blocked-isocyanate system or polyester/TGIC system, a higher terephtholic acid (TPA) content polyester resin shows good mechanical properties, but the exterior durability is not good enough. On the other hand, a polyester based on isophtholic acid (IPA) shows excellent exterior durability, but the high IPA content adversely affects the mechanical properties.
Both excellent exterior durability and good mechanical properties were given by this acrylic/polyester system, especially by the combination of the acrylic resin (having glycidyl-epoxy groups and OH groups), bi-functional polyester (having OH groups and COOH groups) and blocked isocyanate.
Zusammenfassung
Ein Acryl-Polyestersystem für Pulverlacke wurde gefuhrt als Alternative zu TGIC ein. Bei einem konventionllen Polyester-verkapptisocyanatesystem order einem Polyestre-TGIC system zeigt gute Mechanischeigenschaften, aber Aussendouerhaftikeit ist nicht genügend. Auf der anderen Seite gibt ein auf lsophthalsäure basierte Polyesterhorz ausgezeichnete Eigenschaften Aussendouerhoftigkeit, aber der HochlPAgeholt beeintröchtigt d die mechanischen Eigenshaften. Ausgezeichnete Aussendouerhoftigkeit und gute mechanischen Eigenschaften wurden von diesem Acryl-Polyestersystem erreicht, vor allem durch die Verbindung des Polyesterharzes (mit Glycidyl-Epoxid- und Hydroxylgruppen, des zweifunktionellen Polyesterharzes (mit Hydroxyl- und Carbonsöuregruppen) und der Verkopptisocyanate.
Résumé
Un système acrylique-polyester a été introduit en revêtements en poudre comme un alternotif à l’isocyanate de triglycidyle (TGIC). Dons un conventionnel système polyesterisocyanate bloqué ou polyester-TGIC, une rèsine de polyester ayant une teneur plus élevée en l’acide téréphtallique témoigne de bonnes caractéristiques méconiques, mais la durabilité à l’extérieur n’est pos suffisante. D’outre part une résine de polyester basée sur l’acide isophtallique affre d’excellente durabilité à l’extérieur, tandis que la teneur élevée en l’acide isophtallique altère les caractéristiques mécaniques. D’excellente durabilité à l’exterieur et a la fois de bonnes caractéristiques méconiques sont rendues par ce système acryliquepolyester, surtout en raison de la combinaison de la résine acrylique (ayant de groupements glycidyle-époxidiques et hydroxyliques) et de la résine de polyester bifonctionnelle (ayant de groupements hydroxyliques et carboxyliques) et l’isocyanate bloque.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Agawa T and Takeda H, 20th Int. Conf. Org. Coat., 21–35, 1994
Hong D and Agawa T, American Paint & Coatings Journal June 21st, 43–55, 1993
Takeda H and Murakami H; Farbe & Lack,95, 313, 1990
Johnson LK and Sade WT, Proc. 18th Water-borne High-Solids Powder Coating Symp., 65–77, 1991
DSM NV, Eur. Patent No. 522648, 1993
Eastman Chemicals Co Ltd, Eur. Patent No. 601 079, 1994
Nippon Ester Co Ltd, Jpn. Patent No. 7 309 933, 1995
Dainippon Toryo Co Ltd, Jpn. Patent No. 8 151 537, 1996
Hoechst AG, Eur. Patent No. 705 853, 1996
Eastman Chemicals Co Ltd, US Patent No. 5 554 701, 1996
Okada K et al, Progress in Organic Coatings,34, 169–174, 1998
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Iwamura, G., Agawa, T., Maruyama, K. et al. A novel acrylic/polyester system for powder coatings. Surface Coatings International 83, 285–288 (2000). https://doi.org/10.1007/BF02692728
Issue Date:
DOI: https://doi.org/10.1007/BF02692728