Article PDF
Avoid common mistakes on your manuscript.
References
I. Kirman:Metall. Trans., 1971, vol. 2, pp. 1761–70.
G.T. Hahn and A.R. Rosenfield:Metall. Trans. A, 1975, vol. 6A, pp. 653–68.
J.T. Staley: inProperties Related to Fracture Toughness, ASTM STP 605, 1976, pp. 71–96.
J.T. Staley:Fracture Toughness and Microstructure of High Strength Aluminum Alloys, AIME Meeting, Pittsburgh, 1974.
D.S. Thompson:Metall. Trans. A, 1975, vol. 6A, pp. 671–83.
J.T. Staley:Mater. Sci. Technol, 1987, vol. 3, pp. 923–35.
D.S. Thompson, S.B. Subramanya, and S.A. Levy:Metall. Trans., 1971, vol. 2, pp. 1149–60.
P.C. Varley, M.K.B. Day, and A. Sendorek:J. Inst. Met, 1957-58, vol. 86, pp. 337–51.
P.N.T. Unwin and G.C. Smith:J. Inst. Met., 1969, vol. 97, pp. 229- 310.
The Statistician, Quant Systems, Charleston, SC, 1981.
A.J. Bryant and A.T. Thomas:J. Inst. Met., 1972, vol. 100, pp. 40- 44.
H. Suzuki, M. Kanno, and H. Saitoh:Keikinzoku, 1983, vol. 33, pp. 399–406.
S. Kikuchi, H. Yamazaki, and T. Otsuka:J. Mater. Processing Technol., 1993, vol. 38, pp. 689–701.
J.D. Embury and E. Nes:Z. Metallkd., 1974, vol. 65, pp. 45–55.
H.B. Aaron and H.I. Aaronson:Acta Metall., 1968, vol. 16, pp. 789–98.
J. Goldman, H.I. Aaronson, and H.B. Aaron:Metall. Trans., 1970, vol. 1, pp. 1805–10.
J.W. Cahn:Acta Metall., 1956, vol. 4, pp. 572–75.
Author information
Authors and Affiliations
Additional information
D.J. Beerntsen, formerly Senior Staff Research Metallurgist, Aircraft Products, Center for Technology, Kaiser Aluminum & Chemical Corporation, is retired.
Rights and permissions
About this article
Cite this article
Dorward, R.C., Beerntsen, D. Grain structure and quench-rate effects on strength and toughness of AA7050 Al-Zn-Mg-Cu-Zr alloy plate. Metall Mater Trans A 26, 2481–2484 (1995). https://doi.org/10.1007/BF02671263
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02671263