Abstract
Microstructural changes occurring during the fabrication of Zr-2.5 pct Nb alloy pressure tubes by a modified route, involving hot extrusion followed by two pilgering operations with an intermediate annealing step, have been examined in detail. In the conventional fabrication route, the hot extrusion step is followed by a single cold drawing operation in which the cold work to the extent of 25 pct is imparted to the material for achieving the required mechanical properties. Tensile properties obtained at each stage of fabrication have been evaluated and compared between the two processes. The main aim of this work has been to produce a microstructure and texture which are known to yield a lower irradiation growth. Additionally, suitable annealing conditions have been optimized for the intermediate annealing which annihilates the cold work introduced by the first cold pilgering operation without disturbing the two-phase elongated microstructure. This elongated α+ β I microstructure is required for obtaining the desired level of strength at 310 °C. The final microstructure and the crystallographic texture of the finished pressure tube have been compared with those reported for the conventionally processed material.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
B.A. Cheadle, C.E. Coleman, and H. Licht:Nucl. Technol, 1982, vol. 57, pp. 413–25.
R.G. Fleck, E.G. Price, and B.A. Cheadle:Zirconium in the Nuclear Industry, ASTM STP 824, D.G. Franklin and R.B. Actamson, eds., ASTM, Philadelphia, PA, 1984, pp. 88–105.
B.A. Cheadle:Zirconium in the Nuclear Industry, ASTM STP 633, A.L. Lowe, Jr. and G.W. Parry, eds., ASTM, Philadelphia, PA, 1977, pp. 457–85.
R.A. Holt:J. Nucl. Mater., 1979, vol. 82, pp. 419–29.
R.G. Fleck:Can. Metall. Q., 1979, vol. 18, p. 65.
E.F. Ibrahim and R.A. Holt:J. Nucl. Mater., 1980, vol. 91, pp. 311- 21.
R.A. Holt and E.F. Ibrahim:Acta Metall., 1979, vol. 27, pp. 1319- 28.
V. Perovic, G.C. Weatherly, and C.J. Simpson:Acta Metall., 1983, vol. 31, pp. 1381–91.
V. Perovic, G.C. Weatherly, and R.G. Fleck:Can. Metall. Q., 1985, vol. 24, pp. 253–57.
E. Tenchhoff:Deformation Mechanism, Texture, and Anisotropy in Zirconium and Zircaloy, ASTM STP-966, ASTM, Philadelphia, PA, 1980.
J.P. Abriata and J.C. Bolcich:Bull. Alloy Phase Diagrams, 1982, vol. 3, pp. 34–44.
Sarath Kumar Menon, S.K. Banerjee, and Rangachari Krishnan:Metall. Trans. A, 1978, vol. 9A, pp. 1213–20.
V. Perovic and G.C. Weatherly:Acta Metall., 1989, vol. 37, pp. 813- 21.
S. Banerjee, G.K. Dey, and S.J. Vijayakar:Int. Proc. Indo-American Workshop on Interface, Oxford and IBH Publishing Co., New Delhi, India, 1990.
C.P. Luo and G.C. Weatherly:Metall. Trans. A, 1988, vol. 19A, pp. 1153–62.
S. Banerjee and R. Krishnan:Acta Metall., 1971, vol. 19, pp. 1317- 26.
CD. Williams and R.W. Gilbert:J. Nucl. Mater., 1966, vol. 18, pp. 161–66.
D. Srivastava, K. Madangopal, S. Banerjee, and S. Ranganathan:Acta Metall. Mater., 1993, vol. 41, pp. 1445–54.
J.K. Chakravartty, G.K. Dey, and S. Banerjee:Materials Sci. and Tech., 1995, (In press).
S.L. Sass: ONR Technical Report ’62 Contract No. N00014-67-A- 0077-0012, 1971.
R.F. Hehemann:Can. Metall. Q., 1972, vol. 11, pp. 201–12.
R. Strychor and J.C. Williams:Solid-Solid Phase Transformations, H.I. Aaranson, D. Laughlin, R.F. Sekerka, and C.M. Wayman, eds., TMS, Pittsburgh, PA, 1981, pp. 249–53.
L.A. Benderskey, W.J. Boettinger, R.P. Burton, F.I. Biancaniello, and C.B. Shoemaker:Acta Metall. Mater., 1990, vol. 38, pp. 931—43.
B.A. Cheadle, C.E. Ells, and W. Evans:J. Nucl. Mater., 1967, vol. 24, pp. 199–208.
A.J. Haq, A. Haq, and S. Banerjee:Bull. Mater. Sci., 1992, vol. 15, pp. 289–96.
E.F. Ibrahim and B.A. Cheadle:Can. Metall. Q., 1985, vol. 24, pp. 273–81.
E.F. Ibrahim:J. Nucl. Mater., 1983, vol. 118, pp. 260–68.
G.B. Harris:Phil. Mag., 1952, vol. 43, pp. 113–23.
E. Hornbogen,Int. Mater. Rev., 1989, vol. 34, pp 277–296.
W.G. Burgers:Physica, 1930, vol. 1, pp. 561–86.
D.I. Potter:J. Less-Common Met, 1973, vol. 31 p. 299.
H.M. Otte:The Science Technology and Application of Titanium, R.I. Jaffee and N.E. Promisel, eds., Pergamon, London, 1970, pp. 645–57.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Srivastava, D., Dey, G.K. & Banerjee, S. Evolution of microstructure during fabrication of Zr-2.5 Wt pct Nb alloy pressure tubes. Metall Mater Trans A 26, 2707–2718 (1995). https://doi.org/10.1007/BF02669427
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02669427