Abstract
The influence of boron on the isothermal decomposition of Fe-Ni6-C0.12 (wt pct) steels has been investigated. The isothermal γ→ pro-eutectoid ferrite reaction was studied by quantitative metallography and dilatometry. It was clearly shown that boron slows down considerably the nucleation rate of ferrite on γ-grain boundaries. End-quench experiments performed on C0.18-Cr-Mn industrial steels emphasized the changes in hardenability with thermal history.
Particular attention was devoted to the study of the state and location of boron in the microstructure of the steels studied. Ion microscopy, alphagraphy and transmission electron microscopy were used to this effect. It was confirmed that boron segregates easily to γ-grain boundaries during cooling, which results in the precipitation of iron boro-carbides. This precipitation was shown to occur both in stable and metastable austenite, prior to the γ → pro-eutectoid ferrite reaction. The precipitates were identified as Fe23(B, C)6 (FCC structure with a ≈ 10.6Å). The grain boundary Fe23(B, C)6 were shown to have a parallel cube-cube orientation relationship with one of the neighboring grains. The role of the Fe23(B, C)6 precipitates with respect to the γ → proeutectoid ferrite reaction is discussed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
R. A. Grange and T. M. Garvey:Trans. ASM, 1946, vol. 37, p. 136.
T. H. Spencer:Metal Prog., Nov. 1966, p. 76.
G. F. Melloy and J. Russ:Metal Prog., Nov. 1966, p. 83.
J. M. Calkins and A. Dennis:Electric Furnace Proc. AIME, 1969, vol. 27, p. 71.
G. F. Melloy: Bethlehem Steel Co., Bethlehem, Pa. Communication no. 263 presented at the TMS-AIME Meeting, Chicago, Oct. 1973.
R. Simcoe, A. R. Elsea, and G. K. Manning:Trans. AIME, 1955, vol. 203, p. 193 and Trans. AIME, 1956, vol. 206, p. 984.
K. J. Irvine, F. B. Pickering, W. Heselwood, and M. Atkins:J. Iron Steel Inst., 1957, vol. 186, p. 54.
J. Fisher:Trans. AIME, 1954, vol. 200, p. 1146.
R. Tricot, B. Champin, and D. Thivellier:Rev. Met., 1972, vol. 69, p. 121.
J. D. Hughes and G. T. Rogers:J. Inst. Metals, 1967, vol. 95, p. 299.
J. S. Armijo and H. S. Rosenbaum:J. Appl. Phys., 1967, vol. 38, p. 2064.
S. Kawasaki, A. Hishinuma, and R. Nagasaki:J. Nucl. Mater., 1971, vol. 39, p. 166.
J. D. Hughes, M. A. Dewey, and G. W. Briers:Nature, Aug. 1969, vol. 223, p. 498.
R. Castaing: Comptes rendus du IVè Congrès International sur l’Optique des Rayons X et la Microanalyse. Herman, Paris, p. 48, 1966.
G. Slodzian:Rev. Phys. Appl., 1968, vol. 3, p. 360.
Ph. Maitrepierre and R. Tixier: IRSID Internal Report RI 168, June 1971.
R. A. Grange and J. B. Mitchell:Trans. ASM, 1961, vol. 53, p. 157.
G. Carroll, L. S. Darken, E. W. Filer, and L. Zwell:Nature, Nov. 1954, vol. 174, p. 978.
Y. Ohmori:Trans. I.S.I. Jap., 1971, vol. 11, p. 339.
G. F. Melloy, P. R. Slimmon, and P. P. Podgursky:Met. Trans., 1973, vol. 4, p. 2279.
M. H. Lewis and B. Hattersly:Acta Met., 1965, vol. 13, p. 1159.
L. K. Singhal and J. W. Martin:Trans. TMS-AIME, 1968, vol. 242, p. 814.
G. Kurdjumov and G. Sachs:Z. Physik, 1930, vol. 64, p. 325.
A. Dubé: Ph.D. Thesis, Carnegie Institute of Technology, 1948.
H. I. Aaronson:Decomposition of Austenite by Diffusional Processes, p. 387, Interscience Publishers, New York, 1962.
Ph. Maitrepierre: IRSID, France, unpublished research.
Ph. Maitrepierre, D. Thivellier, and R. Tricot:Mém. Sci. Rev. Mét., 1973, vol. 70, p. 893.
S. Wakamatsu:Tetsu to Hagané, 1970, vol. 56, p. 136.
D. Henriet: IRSID, France, private communication.
C.C. McBride, J. W. Spretnak, and R. Speiser:Trans. ASM, 1954, vol. 46, p. 499.
M. E. Nicholson:Trans. AIME, 1954, vol. 200, p. 185.
P. E. Busby, M. E. Wrga, and Wells:Trans. AIME, 1953, vol. 197, p. 1463.
G. M. Leak:Metal Treat. and Drop Forging, Jan. 1956, p. 21.
G. Henry, B. Thomas, and R. Tixier: Proc. of the 3rd International Conference on the Strength of Metals and Alloys, Cambridge, England, August 1973, p. 568.
J. Davidson, P. Balladon, Y. Honnorat, and X. Wache:Mém. Sci. Rev. Mét., 1973, vol. 70, p. 543.
S. R. Keown:Scand. J. Metall., 1973, vol. 2, p. 59.
M. Ueno and T. Inoue:Trans. I.S.I. Jap., 1973, vol. 13, p. 210.
D. Dulieu and J. J. Irani:J. Iron Steel Inst., 1969, vol. 207, p. 308.
P. Coldren: Climax Molybdenum Company, Ann Arbor, Mich. Private communication.
M. Lucco-Borlera and G. Pradelli:Metall. Ital., 1967, no. 11, p. 907.
M. Lucco-BorleraandG.Pradelli:Metall. Ifal., 1968, no. 2, p. 140.
G. R. Kegg and J. M. Silcock:Scripta. Met., 1972, vol. 6, p. 1083.
P. H. Pumphrey and J. W. Edington:Acta Met., 1974, vol. 22, p. 89.
K. N. Tu and D. Tumbull:Acta Met., 1967, vol. 15, p. 1317.
H. I. Aaronson and H. B. Aaron:Met. Trans., 1972, vol. 3, p. 2743.
R. C. Sharma and G. R. Purdy:Met. Trans., 1973, vol. 4, p. 2303.
R. B. Nicholson:Phase Transformations, p. 269, American Society for Metals, Metals Park, Ohio, 1970.
R. A. Grange and H. R. Hribal: USS Technical Report 40.061-010 (1), June 1972.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Maitrepierre, P., Thivellier, D. & Tricot, R. Influence of boron on the decomposition of austenite in low carbon alloyed steels. Metall Trans A 6, 287 (1975). https://doi.org/10.1007/BF02667283
Received:
DOI: https://doi.org/10.1007/BF02667283