Article PDF
Avoid common mistakes on your manuscript.
Cited References
M. Chikashige and R. Hikosaka, “Metallographic Investigation of the System Cadmium-Selenium,”Mem. Coll. Sci. Kyoto Imp. Univ., 2, 239–244 (1917). (Equi Diagram; Experimental)
A.L. Edwards and H.G. Drickamer, “Effect of Pressure on the Absorption Edges of Some III-V, II-VI, and I-VIII Compounds,”Phys. Rev., 122(4), 1149–1157 (1961). (Equi Diagram; Experimental)
D.R. Mason and D.F. O'Kane, “Preparation and Properties of Some Peritectic Semiconducting Compounds,” inInternational Conference on Semiconductor Physics, Prague, 1960, Academic Press Inc., New York, 1026–1031 (1961). (Equi Diagram; Experimental)
G.A. Somorjai, “Vapor Pressure and Solid-Vapor Equilibrium of CdSe,”J. Phys. Chem., 65, 1059–1061 (1961). (Thermo; Experimental)
W.J. Wosten, “The Vapor Pressure of Cadmium Selenide,”J. Phys. Chem., 65, 1949–1951 (1961). (Thermo; Experimental)
A. Reisman, M. Berkenblit, and M. Witzen, “Non-Stoichiometry in Cadmium Selenide and Equilibria in the System Cadmium-Selenium,”J. Phys. Chem., 66, 2210–2214 (1962). (Equi Diagram; Experimental)
A. Jayaraman, W. Klement, and G.C. Kennedy, “Melting and Polymorphic Transitions for Some Group II-VI Compounds at High Pressures,”Phys. Rev., 130(6), 2277–2283 (1963). (Equi Diagram; Experimental)
B.M. Kulwicki, “The Phase Equilibria of Some Compound Semi-Conductors by Differential Thermal Analysis (DTA) Calorimetry,” Ph.D. thesis, University of Michigan, Ann Arbor, Michigan (1963). (Thermo; Experimental)
A.N. Mariano and E.P. Warekois, “High Pressure Phases of Some Compounds of Groups II-VI,”Science, 142, 672–673 (1963). (Equi Diagram, Crys Structure; Experimental)
C.J.M. Rooymans, “A Phase Transformation in the Wurtzite and Zinc Blende Lattice Under Pressure,”J. Inorg. Nucl. Chem., 25, 253–255 (1963). (Equi Diagram, Crys Structure; Experimental)
C.J.M. Rooymans, “Structure of the High Pressure Phase of CdS, CdSe, and InSb,”Phys. Lett., 4(3), 186–187 (1963). (Equi Dia-gram, Crys Structure; Experimental)
P. Goldfinger and M. Jeunehomme, “Mass Spectrometric and Knudsen-Cell Vaporization Studies of Group 2B-6B Compound,”Trans. Faraday Soc, 59, 2851–2867 (1964). (Thermo; Experimental)
A.S. Pashinkin, “Calculation of Vapor Pressure in Measurements by the Knudsen Methods for Completely Dissociated Compounds,”Zh. Fiz. Khim., 48, 2690–2693 (1964) in Russian; TR:Russ. J. Phys. Chem., 38(11), 1461–1463 (1964). (Thermo; Experimental)
J. Terpilowski and E. Ratajczak, “Thermodynamic Properties of CdSe and CdTe,”Bull. Acad. Polon. Sci., Ser. Sci. Chim., 12(6), 355–358 (1964). (Thermo; Experimental)
I. Prigogine and R. Defay, “Chemical Thermodynamics”, Longmans Green and Co., London, 410–411 (1965). (Thermo; Compilation)
L.R. Shiozawa and J.M. Jost, Reports No. ARL 62-366 (March 1962) and ARL65-68 (May 1965), Aerospace Research Lab US AF; as quoted in [67Bur]. (Thermo; Experimental)
A. Burmeister Jr. and D.A. Stevenson, “Phase Equilibria in the Cd-Se System,”J. Electrochem. Soc: Solid State Science, 114(4), 394–398 (1967). (Equi Diagram, Thermo; Theory)
L.A. Sysoev, E.K. Raiskin, and VR. Gur'ev, “Measurement of the Melting Point of Sulfides, Selenides, and Tellurides of Zn and Cd,”Izv. Akad. Nauk SSSR, Neorg. Mater, 32), 390–391 (1967) in Russian; TR:Inorg. Mater, 3(2), 341–342 (1967). (Equi Diagram; Experimental)
E.I. Boev, L.A. Benderskii, N.V. Minaeva, and A.M. Bunin, 'Thermal Dissociation of Zinc Subgroup Chalcogenides. II. Thermal Dissociation of Cadmium Sulphide and Selenide,”Zh. Fiz. Khim., 43(9), 2234–2237 (1969) in Russian; TR:Russ. J. Phys. Chem., 43(9), 1252–1254 (1969). (Thermo; Experimental)
A.F. Demidenko and A.K. Mal'tsev, “Heat Capacity of Zinc Telluride in the Range 56–300 K Entropy and Enthalpy of ZnTe, CdS, CdSe, CdTe,”Izv. Akad. Nauk SSSR, Neorg. Mater, 5(1), 158–160 (1969) in Russian; TR:Inorg. Mater, 5(1), 130–132(1969). (Thermo; Experimental)
A.F. Demidenko, “Heat Capacities of Cadmium Sulfide, Selenide, and Telluride Between 55 and 300 K,”Izv. Akad. Nauk SSSR, Neorg. Mater., 5(2), 252–255 (1969) in Russian; TR:Inorg. Mater, 5(2), 210–212 (1969). (Thermo; Experimental)
P. Flogel, “Crystal Growth of Cadmium Sulfide and Other II-IV Compounds. Equilibrium Between Selenium and Hydrogen Up to 1000 °C”Z Anorg.Chem., 370, 16–30 (1969). (Thermo; Experimental)
A. Onodera, “High Pressure Transition in Cadmium Selenide,”Rev. Phys. Chem. Jpn., 39(2), 65–77 (1969). (Equi Diagram; Experimental)
Y.K. Shaulov and E.N. Kostina, “Heat Capacity and Entropy of Cadmium Selenide at Liquid Nitrogen Temperatures,”Zh. Fiz. Khim., 43(4), 992–994 (1969) in Russian; TR:Russ. J. Phys. Chem., 43(4), 549–550 (1969). (Thermo; Experimental)
H. Jelinek and K.L. Komarek, “Thermodynamic Properties of Cobalt-Selenium Alloy,”Monatsh. Chem., 105, 689–711 (1974). (Thermo; Experimental)
K.C. Mills,Thermodynamic DataforlnorganicSulphides, Selenides and Tellurides, Butterworths, London (1974). (Thermo; Compilation)
R.R. Reeber, “Lattice Parameter and Stoichiometric Variations in CdSe,”J. Mater Sci., 11, 590–591 (1976). (Crys Structure; Experimental)
Y.Y. Chuang, R. Schmid, and Y.A. Chang, “Thermodynamic Analysis of the Iron-Copper System I, the Stable and Metastable Phase Equilibria,”Metall. Trans. A, 15, 1921–1930 (1984). (Thermo; Theory) Cd-Se evaluation contributed byR.C. Sharma andY.A. Chang, Department of Materials Science and Engineering, University of Wisconsin—Madison, 1509 University Avenue, Madison, WI 53706, USA. Professor Sharma was a Visiting Assistant Professor, 1984–86, on leave from the Indian Institute of Technology, Kanpur, U.P. 208016, India. This work was supported by ASM International. Literature searched through 1985. Professor Chang is the Alloy Phase Diagram Program Category Editor for selected binary Group II-VI and III-V alloys.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sharma, R.C., Chang, Y.A. The Cd-Se (Cadmium-Selenium) system. JPE 17, 140–145 (1996). https://doi.org/10.1007/BF02665791
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02665791