Article PDF
Avoid common mistakes on your manuscript.
References
T.F. Bower, H.D. Brody, and M.C. Flemings:Trans. AIME, 1966, vol. 236, pp. 624–34.
H.D. Brody and M.C. Flemings:Trans. AIME, 1966, vol. 236, pp. 615–24.
M.C. Flemings:Solidification Processing, McGraw-Hill Book Company, New York, NY, 1974.
I. Ohnaka:Trans. Iron Steel Inst. Jpn. 1986, vol. 26, pp. 1045–51.
T.W. Clyne and W. Kurz:Metall. Trans. A, 1981, vol. 12A, pp. 965–71.
S. Kobayashi:J. Cryst. Growth, 1988, vol. 88, pp. 87–96.
D.H. Kirkwood:Mater. Sci. Eng., 1984, vol. 65, pp. 101–09.
A.J.W. Ogilvy and D.H. Kirkwood:Appl. Sci. Res., 1987, vol. 44, pp. 43–49.
A. Mortensen:Metall. Trans. A, 1989, vol. 20A, pp. 247–53.
T.W. Clyne:Met. Sci., 1982, vol. 16, pp. 441–50.
M.C.M. Cornelissen:Ironmaking and Steelmaking, 1986, vol. 13, pp. 204–12.
K.S. Yeum, V. Laxmanan, and D.R. Poirier:Metall. Trans. A, 1989, vol. 20A, pp. 2847–56.
J.K. Chuang, D. Reinisch, and K. Schwerdtfeger:Metall. Trans. A, 1975, vol. 6A, pp. 235–38.
Y. Ueshima, S. Mizoguchi, T. Matsumiya, and H. Kajioka:Metall. Trans. B, 1986, vol. 17B, pp. 845–59.
S. Mizoguchi, Y. Ueshima, T. Matsumiya, and H. Kajioka:Solidification Processing 1987, Institute of Metals London, pp. 75–78.
A.M. Michael and M.B. Bever:Trans. AIME, 1954, vol. 200, pp. 47–56.
W. Kurz, B. Giovanola, and R. Trivedi:Acta Metall., 1986, vol. 34, pp. 823–30.
B. Giovanola and W. Kurz:Metall. Trans. A, 1990, vol. 21A, pp. 260–63.
A.J. Campagna: Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1970.
M.C. Flemings:F. Weinberg Int. Conf. on Solidification Processing, J.E. Lait and I.V. Samarasekera, eds., Pergamon Press, New York, NY, 1990, pp. 173–94.
T.Z. Kattamis, J.C. Coughlin, and M.C. Flemings:Trans. AIME, 1967, vol. 239, pp. 1504–11.
H. Jones:J. Mater. Sci., 1984, vol. 19, pp. 1043–76.
T.Z. Kattamis and M.C. Flemings:Trans. AIME, 1965, vol. 233, pp. 992–99.
S.A. Metz and M.C. Flemings:Trans. Am. Foundry men’s Soc, 1969, vol. 77, pp. 329–34.
S.A. Metz and M.C. Flemings:Trans. Am. Foundrymen’s Soc, 1970, vol. 78, pp. 453–60.
D.B. Spencer, R. Mehrabian, and M.C. Flemings:Metall. Trans., 1972, vol. 3, pp. 1925–32.
R.A. Rosenberg, M.C. Flemings, and H.F. Taylor:Trans. Am. Foundrymen’s Soc, 1960, vol. 28, pp. 518–28.
T.W. Clyne and G.J. Davies:Solidification and Casting of Metals, The Metals Society, London, 1979, pp. 275–78.
K. Miyazawa and K. Schwerdtfeger:Arch. Eisenhuettenwes., 1981, Vol. 52, pp. 415–22.
M.C. Flemings and G.E. Nereo:Trans. AIME, 1967, vol. 239, pp. 1449–61.
R.S. Richards and W. Rostoker:Trans. ASM, 1956, vol. 48, pp. 884–903.
R.T. Southin:J. Inst. Met., 1966, vol. 94, pp. 401–07.
G. Schmid and A. Roll:Z. Elektrochem., 1939, vol. 45, pp. 769–75.
D.R. Uhlmann, T.P. Seward III, and B. Chalmers:Trans. AIME, 1966, vol. 236, pp. 527–31.
T.F. Bower and M.C. Flemings:Trans. AIME, 1967, vol. 239, pp. 216–19.
H. Garabedian and R.F. Strickland-Constable:J. Cryst. Growth, 1974, vol. 22, pp. 188–92.
H. Garabedian and R.F. Strickland-Constable:J. Cryst. Growth, 1972, vol. 13/14, pp. 506–09.
A. Vogel:Met. Sci., 1978, vol. 12, pp. 576–78.
N. Apaydin, K.V. Prabhakar, and R.D. Doherty:Mater. Sci. Eng., 1980, vol. 46, pp. 145–50.
D.B. Spencer: Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1971.
P.A. Joly: Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1974.
P.A. Joly and R. Mehrabian:J. Mater. Sci., 1976, vol. 11, pp. 1393–1418.
H.-K. Moon: Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1990.
M.C. Flemings:Rheocasting, Proc. of the Workshop on Rheocasting, Army Materials and Mechanics Research Center, Watertown, MA, Feb. 3-4, 1977, R.D. French and Frank S. Hodi, eds, Metals and Ceramics Information Center, Columbus, OH, pp. 33–39.
T.Z. Kattamis and T.J. Piccone:Mater. Sci. Eng., 1991, vol. A131, pp. 265–72.
W.R. Loue and W.H. Kool: Laboratory of Materials Science and Technology, Delft University of Technology, Delft, The Netherlands, 1989, private communications.
A. Shibutani, K. Arihara, and Y. Nakamura:Tetsu-to-Hagané, 1980, vol. 66, pp. 1550–56.
K. Miwa and R. Ichikawa:J. Jpn. Inst. Met., 1981, vol. 45, pp. 853–59.
K. Chizawa and S. Fukuoka:J. Fac. Eng. Univ. Tokyo, 1975, vol. 33 (2), pp. 149–66.
R. Ichikawa and K. Miwa:J. Jpn. Inst. Met., 1981, vol. 45, pp. 189–93.
N. Mori, K. Ogi, and K. Matsuda:J. Jpn. Inst. Met., 1984, vol. 48, pp. 936–44.
K. Ichikawa and S. Ishizuka:Trans. Jpn. Inst. Met., 1987, vol. 28 (2), pp. 145–53.
K. Ichikawa, S. Ishizuka, and Y. Kinoshita:Trans. Jpn. Inst. Met., 1988, vol. 29 (7), pp. 598–607.
K. Ichikawa, S. Ishizuka, and Y. Kinoshita:Trans. Jpn. Inst. Met., 1987, vol. 28 (2), pp. 135–44.
M.A. Taha, N.A. Mahallawy, M. Lofty Zamzam, and S. El-Mardy:Solidification Processing 1987, Institute of Metals, London, pp. 409–12.
H. Lehuy, J. Masounave, and J. Blain:J. Mater. Sci., 1985, vol. 20, pp. 105–13.
H.I. Lee: Ph.D. Thesis, University of Sussex, Sussex, United Kingdom, 1982.
N. Wang, G. Shu, and H. Yang:Proc. Int. Symp. on New Developments in Cast Alloy Technology, B. Liu and J. Liu, eds., Luoyang, People’s Republic of China, 1988.
W.R. Loue, E. Nava-Vazquez, and W.H. Kool:1st Int. Conf. on Semi-Solid Processing of Alloys and Composites, April 4-6, 1990, Ecole Nationale Superior des Mines de Paris, Sophia-Antipolis, Valbonne, France.
H.A. Rames, J.F. Hutton, and K. Walters:An Introduction to Rheology, Elsevier Science Publishers, New York, NY, 1989.
V. Laxmanan and M.C. Flemings:Metall. Trans. A, 1980, vol. 11A, pp. 1927–37.
M.P. Kenney, J.A. Courtois, R.D. Evans, G.M. Farrier, C.P. Kyonka, A.A. Koch, and K.P. Young:Metals Handbook, 9th ed., ASM INTERNATIONAL, Metals Park, OH, 1988, vol. 15, pp. 327–38.
S.B. Brown:Proc. 5th Int. Conf. on the Modeling of Casting, Welding, and Solidification Processes, M. Rappaz, ed., TMS, Warrendale, PA, 1990.
O.J. Ilegbusi and J. Szekely:Iron Steel Inst. Jpn. International, 1990, vol. 30 (5), pp. 372–80.
M.C. Flemings et al.:Machine Casting of Ferrous Alloys, Interim Technical Report, ARPA Contract No. DAAG46-73-C-0110, Dec. 1973.
M.C. Flemings et al.:Machine Casting of Ferrous Alloys, Interim Technical Report, ARPA Contract No. DAAG46-73-C-0110, Dec. 1974.
M.C. Flemings, R. Mehrabian, J.R. Melcher, R.G. Riek, K.P. Young, N. Matsumoto, D.G. Backman, F.S. Blackall, B.E. Bond, E. McHale, and F.S. Schottman:Machine Casting of Ferrous Alloys, Interim Technical Report, ARPA Contract No. DAAG46-73-C-0110, June 1975.
M.C. Flemings, K.P. Young, and R.G. Riek:Machine Casting of Ferrous Alloys, Interim Technical Report, ARPA Contract No. DAAG46-73-C-0110, Dec. 1975.
M.C. Flemings, K.P. Young, R.G. Riek, J.F. Boylan, and R.L. Bye:Machine Casting of Ferrous Alloys, Interim Technical Report, ARPA Contract No. DAAG46-73-C-0110, June 1976.
M.C. Flemings, K.P. Young, J.F. Boylan, R.L. Bye, M.L. Santor, and B.E. Bond:Machine Casting of Ferrous Alloys, Interim Technical Report, ARPA Contract No. DAAG46-73-C-0110, June 1977.
M.C. Flemings, J.F. Boylan, and R.L. Bye:Thixocasting Steel Parts, Final Technical Report, ARPA Contract No. DAAG46-77-C-0033, Sept. 1978.
M.C. Flemings and R. Mehrabian: Trans. Int. Foundry Congress, Moscow, 1973,Trans. Am. Foundrymeris Soc, 1973, vol. 81, pp. 81–88.
M.C. Flemings, R.G. Riek, and K.P. Young:Mater. Sci. Eng., 1976, vol. 25, pp. 103–17.
M.C. Flemings and K.P. Young:Yearbook of Science and Technology, McGraw Hill Book Company, New York, NY, 1978, pp. 49–58.
R. Mehrabian, R.G. Riek, and M.C. Flemings:Metall. Trans. A, 1974, vol. 5A, pp. 1899–1905.
M.C. Flemings, R.G. Riek, and K.P. Young:Am. Foundrymen’s Soc. Int. Cast. Met. J., 1976, vol. 3, pp. 11–22.
P.K. Rohatgi, B.C. Pai, and S.C. Panda:J. Mater. Sci., 1979, vol. 14, pp. 2277–83.
P.K. Rohatgi, R. Asthana, and S. Das:Int. Met. Rev., 1986, vol. 31, pp. 115–39.
J.W. McCoy, C. Jones, and F.E. Wawner:SAMPE Q., 1988, vol. 19 (2), pp. 37–50.
G. Girot: Doctoral Thesis, L’Université de Bordeaux I, Bordeaux, France, 1987.
W.R. Loue and W.H. Kool: Laboratory of Materials Science and Technology, Delft University of Technology, Delft, The Netherlands, private communications, 1989.
M. Mada and F. Ajersch: Abstract, TMS Annual Meeting, Anaheim, CA, Feb. 1990.
R.G. Riek, K.P. Young, N. Matsumoto, R. Mehrabian, and M.C. Flemings:Society of Die Casting Engineers 1975 Trans., 8th Int. Die Casting Exposition and Congress, Detroit, MI, Paper No. G-T75-153.
K.P. Young, R.G. Riek, J.F. Boylan, R.L. Bye, B.E. Bond, and M.C. Flemings:Trans. Am. Foundrymen’s Soc, 1976, vol. 84, pp. 169–74;Die Casting Engineer, Mar.-Apr. 1976, pp. 46-52.
K.P. Young, D.E. Tyler, H.P. Cheskis, and W.G. Watson: U.S. Patent 4,482,012, 1984.
M. Nakada, Y. Shiohara, and M.C. Flemings:Iron Steel Inst. Jpn. Int., 1990, vol. 30, pp. 27–33.
G.B. Brook:Mater. Design, 1982, vol. 3, pp. 558–65.
R.L. Antona and R. Moschini:Met. Sci. Technol., 1986, vol. 4 (2), pp. 49–59.
A.J.W. Ogilvy: Osprey Metals Ltd., Glamorgan, United Kingdom, private communication, 1990.
P.S. Frederick, N.L. Bradley, and S.C. Erickson:Advanced Materials and Processes, 1988, vol. 134 (4), pp. 53–56.
K.P. Young, C.P. Kyonka, and J.A. Courtois: U.S. Patent 4,415,374, 1983.
J. Collot, U.S. Patent No. 4510987, April 16, 1985.
P.S. Wilcox: Abstract,1st Int. Conf. on Semi-Solid Processing of Alloys and Composites, Sophia-Antipolis, France, Apr. 4-6, 1990.
T. Matsumiya and M.C. Flemings:Metall. Trans. B, 1981, vol. 12B, pp. 17–31.
R. Mehrabian, D.R. Geiger, and M.C. Flemings:Metall. Trans., 1974, vol. 5, pp. 785–87.
Rights and permissions
About this article
Cite this article
Flemings, M.C. Behavior of metal alloys in the semisolid state. Metall Trans A 22, 957–981 (1991). https://doi.org/10.1007/BF02661090
Issue Date:
DOI: https://doi.org/10.1007/BF02661090