Abstract
A novel electrical resistance probe technique to measure thein situ volume fraction of ceramic particles in molten metals was applied to the measurement of sedimentation rates of 90-µm-diameter silicon carbide particles in molten aluminum. The results indicate that the rate strongly depends on volume fraction; the time to clarify a 0.15-m depth increased from approximately 60 to 500 seconds as the particle volume fraction increased from 0.05 to 0.30. Maps showing the changes in volume fraction throughout the melt were generated. A multiphase hydrodynamic model was developed to describe the sedimentation. Using volume fraction-dependent drag coefficients from work in aqueous systems, the model was able to simulate the experimental results remarkably well. The experimental and modeling results indicate that there was little agglomeration or network formation during sedimentation. The implications of the results for solidification and particle pushing are discussed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A.D. McLeod, C. Gabryel, D.J. Lloyd, and P. Morris: inProcessing of Ceramic and Metal Matrix Composites, H. Mostaghaci, ed., CIM Conf. of Metallurgists, Aug. 20–24, 1989, Pergamon Press, New York, NY, pp. 228–35.
G.S. Hanumanth and G.A. Irons: inFabrication of Particulates Reinforced Metal Composites, J. Masounave and F.G. Hamel, eds., ASM INTERNATIONAL, Metals Park, OH, 1990, pp. 41–46.
M. Acta and F. Ajersch: inMetal and Ceramic Matrix Composites: Processing, Modelling and Mechanical Behaviour, R.B. Bhagat, A.H. Clauer, P. Kumar, and A.M. Ritter, eds., TMS, Warrendale, PA, 1990, pp. 337–50.
R.B. Bird, W.E. Stewart, and E.L. Lightfoot:Transport Phenomena, John Wiley and Sons Inc., New York, NY, 1960, p. 60.
G.J. Kynch:Trans. FarActay Soc., 1952, vol. 48, pp. 166–76.
F.M. Tiller:AlChEJ., 1981, vol. 27, pp. 823–29.
J.F. Richardson and W.N. Zaki:Trans. Inst. Chem. Eng., 1954, vol. 32, pp. 35–53.
G.B. Wallis:Proc. Symp. on Interactions between Fluids and Particles, Institute of Chemical Engineers, London, 1962, vol. 9, pp. 9–16.
S. Lafreniere and G.A. Irons:Int. Symp. on Production, Refining, Fabrication and Recycling of Light Metals, Hamilton, ON, Canada, Aug. 1990, CIM, pp. 177–86.
D.C. Dixon:AIChEJ., 1980, vol. 26, pp. 471–77.
Y.T. Shih, D. Gidaspow, and D.T. Wasan:Powder Technol., 1987, vol. 50, pp. 201–15.
G. Hetsroni:Handbook of Multiphase Systems, McGraw-Hill, New York, NY, 1982.
D. Gidaspow:Appl. Mech. Rev., 1986, vol. 39, pp. 1–22.
R.F. Sincovec and N.K. Madsen:ACM Trans. Mathematical Software, 1975, vol. 1, pp. 232–60.
A.C. Hindmarsh: inScientific Computing, R.S. Stepleman, M. Carver, R. Peskin, W.F. Ames, and R. Vichnevetsky, eds., North-Holland, Amsterdam, 1983, pp. 55–64.
Author information
Authors and Affiliations
Additional information
Formerly Graduate Student, McMaster University
Rights and permissions
About this article
Cite this article
Hanumanth, G.S., Irons, G.A. & Lafreniere, S. Particle sedimentation during processing of liquid metal-matrix composites. Metall Trans B 23, 753–763 (1992). https://doi.org/10.1007/BF02656454
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02656454