Abstract
The mechanical properties of solders benefit from uniform dispersion of fine precipitates and small effective grain sizes. Metallurgical methods of attaining such a beneficial microstructure have been investigated in two new, near-eutectic, Pb-free solder alloys systems—Sn-Zn-In (m.p. ∼188°C) and Sn-Ag-Zn (m.p.∼217°C). It has been found that small alloying additions of Ag dramatically improve the mechanical properties of the ternary Sn-8Zn-5In alloy. The improvement is attributed to the elimination of the coarse and nonuniform distribution of plate-like dendrites and refining the effective grain size in the solidified microstructure. Also, small amounts of Cu dramatically improve the ductility in the ternary Sn-3.5Ag-lZn alloy. The quaternary Sn-3.5Ag-lZn-0.5Cu has better mechanical properties than the binary Sn-3.5Ag alloy because it has a uniform fine dispersion of precipitates and a small effective grain size. The combination of high mechanical strength and high ductility is likely to yield improved fatigue resistance properties in the interconnection of electronic components.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
See series of articles inJOM 45, 13 (1993).
Z. Mei and J. W. Morris, Jr.,Trans. ASME, J. Elec. Packaging 114,104(1992).
Binary Alloy Phase Diagrams, 2nd ed., ed. T. B. Massalski (Materials Park, OH: ASM International, 1991), p. 3417.
Ref. 3, p. 96.
M. McCormack and S. Jin,JOM 45 (7) 36 (1993).
M. McCormack, S. Jin, H. S. Chen and D. A. Machusak,J. Electron. Mater. 23, 683 (1994).
M. McCormack and S. Jin,.J. Electron. Mater. 23,631 (1994).
M. McCormack, S. Jin, G. W. Kammlott and H. S. Chen,Appl. Phys. Lett. 63, 15 (1993).
M. McCormack, G. W. Kammlott, H. S. Chen and S. Jin,Appl. Phys. Lett, (in press).
M. McCormack and S. Jin,J. SAMPE (in press).
M. McCormack, G. W. Kammlott, H. S. Chen and S. Jin,Appl. Phys. Lett. (in press).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mccormack, M., Jin, S. Improved mechanical properties in new, Pb-free solder alloys. J. Electron. Mater. 23, 715–720 (1994). https://doi.org/10.1007/BF02651364
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02651364