Abstract
Processing methods for producing dispersion-strengthened (DS) copper alloys with high strength, high conductivity, and good long-term stability at elevated temperature are reviewed. Particle size and stability are related to material characteristics and processing route. Physical and mechanical properties of DS copper alloys are directly associated with microstructural features such as particle volume fraction, stability, size, solubility in the matrix, and interfacial properties. New avenues for DS copper alloys design are suggested based on thermal conductivity concept and recent Rosier- Artz theory of high-temperature strength.[1]
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. Rosler and E. Artz,Acta Metall., 38, 671–683 (1990).
N. Fuschillo and M.L. Gimpl,J. Appl. Phys., 43, 5513–5516 (1971).
A.V. Nadkarni, inHigh Conductivity Copper and Aluminum Alloys, E. Ling and P.W. Tautenblat, Ed., TMS-AIME, Warrendale, PA, 77(1984).
J.G. Schroth and V. Franetovic,Journal of Materials, 41(1), 37–39 (1989).
M.A. Morris and D.G. Morris,Mater. Sci. Eng., A111, 115–127 (1989).
G.B. Schaffer and P.G. McCormick,Scripta Metall., 23,835–838 (1989).
T. Takahashi, Y. Hashimoto, K. Koyama, and K. Suzuki, inProc. 4th Intern. Symp. Science and Technology of Sintering, S. Somiyaet al., Ed., Elsevier Applied Science, London, 659 (1987).
T. Takahashi and Y. Hashimoto,J. Jpn. Inst. Met., 54, 67–75 (1990).
J.J. Stephens and C.R. Hills, “Long Term Stability of Two Dispersion Strengthened Copper Alloy s at Elevated Temperatures, ” presented at the 119th Annual Meeting of TMS, Anaheim, Feb 18-22 (1990).
N.W. Blossom,Met. Powder Rep., Jul/Aug, 55 (1990).
R.W. Hayes, L.G. Fritzemeier, and P.D. Krotz, “Steady-State Creep Behavior and Microstructure Stability of a Cu Based High Strength-High Thermal Conductivity Microcomposite,” presented at Aeromat, ’90, Long Beach (1990).
M.A. Morris and D.G. Morris,Mater. Sci. Eng., A104, 201–213 (1990).
.N. Patel and S. Diamond,Mater. Sci. Eng., 98,329–334(1988).
M.A. Morris and D.G. Morris,Scripta Metall., 24, 1701–1706 (1990).
D.L. Ellis and G.M. Michal, “Precipitation Strengthened High Strength, High Conductivity Cu-Cr-Nb Alloys Produced by Chill Block Melt Spinning,” NASA Technical Memorandum 185144 (1989).
D.L. Ellis, G.M. Michal, and N.W. Orth,ScriptaMetall., 24, 885–890 (1990).
A.V. Nadkarni and J.E. Synk, inMetals Handbook, Powder Metallurgy, vol 7, 9th ed., ASM, 711(1984).
J.S. Benjamin, inNew Materials by Mechanical Alloying Techniques, E. Artz and L. Schultz, Ed., DGM Informationsgesellschaft, Oberursel, 3 (1989).
G.B. Schaffer and P.G. McCormick,Met. Trans.,21A, 2789–2794 (1990).
T. Takahashi, Y. Hashimoto, S. Omori, and K. Koyama,Trans. J. Inst. Met., 26,271–279 (1985).
E.P. Daneliya, M.D. Teplitskii, and V.I. Solopov,Fiz. Met. Metallov., 47, 595–597 (1979).
M.L. Adams, S.L. Kampe, A.R. Harmon, and L. Christodoulou, in1989 Advances in Powder Metallurgy, T.G. Gasbarre and W.F. Jandeska, Jr., Ed., vol 3,439, MPIF, APMI, Princeton, NJ (1989).
H. Gray, personal communication, NASA Lewis Center, Cleveland, OH (1990).
F.H. Froes.Met. Powder Rep., 838–840 (1988).
R.N. Wright and I.E. Anderson,Mater. Sci. Eng., A114, 167–172 (1989).
R.W. Balliett, personal communication, NRC, Inc., Newton, MA (1990).
D.G. Morris and M.A. Morris, inNew Materials by Mechanical Alloying Techniques, E. Artz and L. Schultz, Ed., DGM Informationsgesellschaft, Oberursel, 143 (1989).
I.M. Lifshitz and V.V. Slyozov,J. Phy. Chem. Solids, 19, 35–50 (1961).
C. Wagner,Z. Electrochem., 65,581–591 (1961).
G.L. Shiflet and J.A. Hawk, inDispersion Strengthened Aluminum Alloys, Y.-W. Kim and W.M. Griffin, Ed., TMS, Warrendale, PA, 31(1988).
J.J. Stephens, J.A. Romero, and C.R. Hills, inMicrostructural Science, H.J. Cialoniet al, Ed., vol 16, 245–264 (1988).
J.J. Stephens, R.J. Bourcier, F.J. Vigil, andD.T. Schmale, in “Mechanical Properties of Dispersion Strengthened Copper: A Comparison of Braze Cycle Annealed and Coarse Grain Microstructures,” SANDIA Report, SAND 88-1351 (1988).
M. Slesar, G. Jangg, M. Besterci, J. Durisin, and M. Orolinova,Z. Metallkunde., 80, 817–824 (1989).
K. Schroeder, inHigh Conductivity Copper and Aluminum Alloys, E. Ling and P.W. Tautenblat, Ed., TMS-AIME, Warrendale, PA, 1 (1984).
J.S. Benjamin and M.J. Bomford,Met. Trans, 8A, 1301–1305 (1977).
S. Gidea and J. Groza,Metall. Proc. Bucharest Polytechnic Inst., 7,17–27(1973).
K.R. Karasek and J. Bevk,Scripta Metall., 13,259–262 (1979).
R.S.W. Shewfelt and L.M. Brown,Philos. Mat., 35, 945–962 (1977), 30, 1135-1145(1974).
J.C. Gibeling and W.D. Nix,Mater. Sci. Eng., 45, 123–135 (1980).
J. Rosler and E. Artz, inNew Materials by Mechanical Alloying Techniques, E. Artz and L. Shultz, Ed., DGM Informationsgesellschaft, Oberursel, 279 (1989).
E. Artz, inNew Materials by Mechanical Alloying Techniques, E. Artz and L. Schultz, Ed., DGM Informationsgesellschaft, Oberursel, 185(1989).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Groza, J. Heat-resistant dispersion-strengthened copper alloys. JMEP 1, 113–121 (1992). https://doi.org/10.1007/BF02650042
Issue Date:
DOI: https://doi.org/10.1007/BF02650042