Article PDF
Avoid common mistakes on your manuscript.
References
M. Boulos, P. Fauchais, E. Pfender, and M. Vardelle, Fundamentals of Plasma Particle Momentum and Heat Transfer,Thermal Spraying, World Scientific, 1993, p 3-57
R. McPherson, A Review of Microstructure and Properties of Plasma Sprayed Ceramic Coatings,Surf. Coat. Technol., Vol 39/40, 1989, p 173–181
R. McPherson, The Relationship between the Mechanism of Formation, Microstructure and Properties of Plasma Sprayed Coatings,Thin Solid Films, Vol 83, 1981, p 297–310
P. Fauchais, J.F. Coudert, and M. Vardelle, Diagnostics in Thermal Plasma Processing,Plasma Diagnostics, Academic Press, 1989, p 349–446
P. Fauchais, J.F. Coudert, A. Vardelle, M. Vardelle, and A. Denoirjean, Diagnostics of Thermal Spraying Plasma Jets,J. Thermal Spray Technol., Vol 1 (No. 2), 1992, p 117–128
M. Vardelle, A. Vardelle, and P. Fauchais, Spray Parameters and Particle Behavior Relationships during Plasma Spraying,J. Thermal Spray Technol., Vol 2 (No. 1), 1993, p 79–92
A. Vardelle, M. Vardelle, and P. Fauchais, Diagnostics for Particulate Vaporization and Interaction with Surface,Pure Appl. Chem., Vol 64 (No. 5), 1992, p 637–644
S. Kuroda, T. Fukushima, and S. Kitahara, Significance of Quenching Stress in the Cohesion and Adhesion of Thermally Sprayed Coatings,J. Thermal Spray Technol., Vol 1 (No. 4), 1992, p 325–332
O.P. Sololenko and A.I. Fedorchenko, Nonstationary Contact and Conjugate Heat Transfer in Plasma Technologies,High Temperature Dust Laden Jets, VSP, The Netherlands, 1989, p 419–435
V.V. Kudinov, P.Yu. Pekshev, and V.A. Safinllin, Forming of the Structure of Plasma-Sprayed Materials,High Temperature Dust Laden Jets, VSP, The Netherlands, 1989, p 381–418
V.P. Lyagushkin, O.P. Sololenko, P.Yu. Pekshev, and V.A. Safinllin, Complex Experiment in Plasma Jet Spraying,High Temperature Dust Laden Jets, VSP, The Netherlands, 1989, p 285–298
J.M. Houben, “Relation of the Adhesion of Plasma Sprayed Coatings on the Process Parameters Size, Velocity and Heat Content of the Spray Particles,” Doctoral thesis, University of Eindhoven, The Netherlands, 1988
P.G. Boswell, Solidification Models for High Cooling Rates,Met. Forum, Vol 2 (No. 1), 1979, p 40–54
C.C. Berndt, W. Brindley, A.N. Goland, H. Herman, D.L. Houck, K. Jones, et al., Current Problems in Plasma Spray Processing,J. Thermal Spray Technol., Vol 1 (No. 4), 1992, p 341–356
S. Sampath, “Rapid Solidification during Plasma Spraying,” Ph.D. thesis, SUNY at Stony Brook, Aug 1989
C. Moreau, P. Cielo, M. Lamontagne, S. Dallaire, and M. Vardelle, Impacting Particle Temperature Monitoring during Plasma Spray Deposition,Meas. Sci. Technol., Vol 1, 1990, p 807–814
M. Vardelle, A. Vardelle, P. Fauchais, and C. Moreau, Pyrometer System for Monitoring the Particle Impact on a Substrate during Plasma Spray Process,Meas. Sci. Technol., Vol 5, 1994, p 205–212
K.A. Roberts and T.W. Clyne, A Simple Procedure for the Characterization of Spray Deposition Processes. The Line Scan Test,Surf. Coat. Technol., Vol 41, 1990, p 103–115
T. Bennett and D. Poulikakos, Splat-Quench Solidification: Estimating the Maximum Spreading of a Droplet Impacting on a Solid Surface,J. Mater. Sci., Vol 28, 1993, p 963–970
J. Madejski, Solidification of Droplets on a Cold Surface,Int. J. Heat Mass Transfer, Vol 19, 1976, p 1009–1013
O. Knotek and R. Elsing, Monte-Carlo Simulation of the Lamellar Structure of Thermally Sprayed Coatings,Surf. Coat. Technol., Vol 32, 1987, p 261–271
H. Fukanuma, An Analysis of the Porosity Producing Mechanism,Thermal Spray: International Advances in Coatings Technology, C.C. Berndt, Ed., ASM International, 1992, p 767–772
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Fauchais, P. Formation of plasma sprayed coatings. JTST 4, 3–6 (1995). https://doi.org/10.1007/BF02648521
Issue Date:
DOI: https://doi.org/10.1007/BF02648521