Abstract
This paper describes a new spray-forming process based on thermal spray shape deposition. Shape deposition processes build three-dimensional shapes by incremental material buildup of thin, planar crosssectional layers. These processes do not require preformed mandrels and can directly build three-dimensional structures of arbitrary geometric complexity. The basis for the thermal spray approach is to spray each layer using a disposable mask that has the shape of the current cross section. Masks can be produced from paper rolls, for example, with a CO2 laser. In addition to applications for rapid prototyping, this approach makes possible the fabrication of composite structures and integrated electronic/mechanical assemblies that are not feasible with conventional manufacturing technologies.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
L. Weiss, E.L. Gursoz, F.B. Prinz, P.S. Fussell, S. Mahalingham, and E.P. Patrick, “A Rapid Tool Manufacturing System Based on Stereolithography and Thermal Spraying,”Manufact. Rev., 3(1), 40–48 (1990).
D.L. Bourell, J.J. Beaman, H.L. Marcus, and J.W. Barlow, “Solid Freeform Fabrication: An Advanced Manufacturing Approach,”Proc. Solid Freeform Fabricaton Symposium, The University of Texas at Austin, Aug 6-8, 1–7 (1990).
S. Ashley, “Rapid Prototyping Systems,”Mech.Eng. 113(4), 34–43 (1991).
T.E. Doyle, “Shape Melting Technology,”Proc. Nat. Conf. Rapid Prototyping, sponsored by the Rapid Prototype Development Laboratory, Center for Advanced Manufacturing, University of Dayton, Dayton, June 4-5, 55–62 (1990).
H. Herman and S. Sampath, “Plasma Spray Forming of Free-Standing Shapes,”Proc. 2nd Plasma-Technik Symp., sponsored by Plasma Technik, Inc., Luzern, Switzerland, May 5-7, 63–73 (1991).
D. Hauber, “Automated Fabrication of Net Shape Microcrystalline and Composite Metal Structures Without Molds,”Proc. NSF 14th Conf. Production Research Techno!., University of Michigan, Oct 6-9, 461–466 (1987).
L.E. Weiss and F.B. Prinz, “Solid Freeform Fabrication by Thermal Spray Shape Deposition,”Proc. 1992 ASM Int. Thermal Spray Conf, Orlando, June 1-5 (1992).
R. Merz, F.B. Prinz, and L.E. Weiss, “Planning Mask Cutting for Thermal Spray Spray Deposition,” Technical report EDRC 24-73-91, Carnegie Mellon University, Pittsburgh, PA (1991).
M.M. Fasching, L.E. Weiss, and F.B. Prinz, “Optimization of Robotic Spray Trajectories for Thermal Spray Shape Deposition,” Technical report EDRC 24-74-91, Carnegie Mellon University, Pittsburgh, PA (1991).
L.E. Weiss and L. Schultz, U.S. patent 5,079,974, “Sprayed Metal Dies” (1991).
L.E. Weiss and F.B. Prinz, “A Conceptual Framework for a ‘Masks & Deposits’ Thermal Spray Shape Deposition System,”Proc. DARPA Workshop Manufact., Salt Lake City, Feb (1991).
K.I’Ansonet al., “Use of the Shot Peening Process for Surface Modification of Thermal Sprayed Coatings,”Proc. ASM 4th Nat. Thermal Spray Conf, Pittsburgh, May 4-10,138–145 (1991).
P.S. Fussell, H.O.K.Kirchner, F.B. Prinz, and L.E. Weiss, “Controlling the Microstructure of Arc Sprayed Shells,”Proc. Solid Freeform Fabrication Symp., The University of Texas, Austin, Aug 12-14, 213–235 (1991).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Weiss, L.E., Prinz, F.B., Adams, D.A. et al. Thermal spray shape deposition. JTST 1, 231–237 (1992). https://doi.org/10.1007/BF02646778
Issue Date:
DOI: https://doi.org/10.1007/BF02646778