Zusammenfassung
Ein zerstörungsfreies Prüfverfahren zur Bestimmung der Rohdichte an eingebautem Holz wird vorgestellt. Dabei wird ein Stahlstift mit einer definierten Energie in das Holz eingetrieben und die erreichte Eindringtiefe gemessen. Über Regressionsgleichungen, die durch systematische Versuchsreihen ermittelt wurden, läßt sich die Rohdichte abschätzen, wobei die Holzfeuchte und die Anzahl der Messungen zu beachten sind. Das Verfahren kann im Einzelfall schon jetzt eine wertvolle Hilfe bei Zustandsuntersuchungen bestehender Holzkonstruktionen sein. Allgemeingültige Beurteilungskriterien, insbesondere für „altes” Holz, müssen noch erarbeitet werden.
Abstract
A non-destructive method for determining the density of built-in wood is presented. A blunt pin is shot into wood with a constant energy and the penetration depth is read on a scale. Regression models, which are determined by systematic test series are used for estimating wood density, considering the moisture content and the number of measurements. This method can be helpful for inspecting the state of wood in structures. Further studies for common rules, especially for elder wood are necessary.
Article PDF
Avoid common mistakes on your manuscript.
Literatur
Cheliak, W.M.; Yeatman, C.W.; Kneppeck, L.D. 1984: Temperature effects on Pilodyn pin penetration. Canad. Forest. Serv. 4:21–23
Cown, D.J. 1978: Comparison of the Pilodyn and torsiometer methods for the rapid assessment of wood density in living trees. New Zealand J. Forest. Sci. 8:384–391
Cown, D.J. 1982: Use of the Pilodyn wood tester for estimating wood density in standing trees—influence of site and tree age, Forest Res. Inst. New Zealand, No. 13 (1982)
Gough, G.; Barnes, R.D. 1984: A comparison of three methods of wood density assessment in a pinus elliottii progeny test. South Afric. Forest. J. 128:22–25
Hoffmeyer, P. 1978: The Pilodyn instrument as a nondestructive tester of the shock resistance of wood. 4th Nondestructive Testing of Wood Symposium 1978
Hoffmeyer, P. 1981: Improving the efficiency of visual stress grading by means of the Pilodyn wood tester. IUFRO World Conference, Kyoto, Japan 1981
Lewark, S.; Giefing, D. 1983: Erste Erfahrungen bei der Rohdichtebestimmung mit dem Pilodyn-Holzprüfgerät an Buche und Fichte. Forst- u. Holzw. 38:517–521
Lewark, S. 1985: Korrekturfaktoren für Meßwerte eines Pilodyn-Holzprüfgerätes aus verschiedenen Monaten. Holz Roh-Werkstoff 40:148
Madsen, T.L. 1980: The efficiency of visual and mechanical stress grading of norway spruce timber, and the possibilities of improving the methods by means of the Pilodyn instrument or additional annual ring width limits. IUFRO Division 5 Conference, Oxford 1980
Micko, M.M.; Wang, E.I.C.; Taylor, F.W.; Yanchuk, A.D. 1981: Determination of wood density in standing white spruce using Pilodyn tester. Forest. Chron. 58:178–180
Setliff, E.; Byrne, A.; Nicol-Smith, C. 1983: Decay assessment in douglas-fir stave tanks with comments on structural effects. Forintek Canada Corp. (1983)
Smith, S.M.; Morrell, J.J. 1986: Correcting Pilodyn measurement of douglas-fir for different moisture levels. Forest Prod. J. 36:45–46
Steck, G.; Görlacher, R. 1987: Methoden der zerstörungsfreien und zerstörungsarmen Prüfung von Bauholz—eine Literaturauswertung. Jahrbuch des SFB 315 (1986). Berlin: Ernst u. Sohn
Sprague, J.R.; Talbert, J.T.; Jett, J.B.; Bryant, R.L. 1983. Utility of the Pilodyn in selection for mature wood specific gravity in loblolly pine. Forest Sci. 29:696–701
Author information
Authors and Affiliations
Additional information
Herrn em. o. Prof. Dr.-Ing. Dr.-Ing E.h. Kari Möhler zu seinem 75. Geburtstag gewidmet
Rights and permissions
About this article
Cite this article
Görlacher, R. Zerstörungsfreie Prüfung von Holz: Ein „in situ”-Verfahren zur Bestimmung der Rohdichte. Holz als Roh-und Werkstoff 45, 273–278 (1987). https://doi.org/10.1007/BF02608673
Issue Date:
DOI: https://doi.org/10.1007/BF02608673