Abstract
A study is conducted into the microstructure and physico-mechanical properties of ultrafine-grained titanium produced by severe plastic deformation using the method of equichannel angular pressing. The effects of thermal and mechanical treatment on these characteristics are investigated. The possibility of forming mechanical properties in titanium that compare well with those of highly doped titanium alloys is shown.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
H. Gleiter, Progr. Mater. Sci., No. 33, 223–315 (1989).
J. R. Weertman, Mater. Sci. Eng.,A116, No. 1997, 16–26 (1993).
R. Z. Valiev, N. A. Krasilnikov, and N. K. Tsenev, Mater. Sci. Eng.,137, 35 (1991).
Yu. R. Kolobov, G. P. Grabovetskaya, I. V. Ratochka,et al., Nanostructured Mater.12, 1127–1130 (1999).
Yu. R. Kolobov, G. P. Grabovetskaya, I. V. Ratochka,et al., Ann. Chim. Sci. Mater., No. 21, 483–491 (1996).
R. Z. Valiev, D. A. Salimonenko, N. K. Tsenev,et al., Scripta Materialia,37, No. 12, 1945–1950 (1997).
K. V. Ivanov, I. V. Ratochka, and Yu. R. Kolobov, Nanostructured Materials,37, No. 12, 947–950 (1999).
R. Z. Valiev, Mater. Sci. Eng.,A234–236, 59–66 (1997).
A. Vinogradov, Y. Kaneko, K. Kitagawa,et al., Scripta Materialia,36, No. 11, 1945–1950 (1997).
S. O. Tsobkallo and Yu.F. Balandin, Measuring Devices, No. 2, 26–31 (1959).
A. V. Karlov, Yu. R. Kolobov, L. S. Bushnev,et al., Topical Issues of Orthopaedics and Traumatology [in Russian], Ufa (1997).
A. V. Karlov, Yu. R. Kolobov, L. S. Bushnev, and E. E. Sagymbaev, Biomedizinische Technik,B42, No. 2, 504–507 (1997).
R. Thull, Naturwissenschaften, No. 81, 481–488 (1994).
E. F. Dudarev, Microplastic Deformation and Yield Points in Polycrystals [in Russian], State University, Tomsk (1988).
N. N. Nikitina, G. P. Pochivalova, and O. B. Perevalova, Probl. Prochn., No. 8, 40–44 (1979).
E. F. Dudarev, G. P. Pochivalova, and N. V. Nikitin, Izv. Vyssh. Uchebn. Zaved., Fiz., No. 3, 29–34 (1990).
U. Zwicker, Titanium and Its Alloys [Russian translation], Metallurgiya, Moscow (1983).
B. N. Arzamasov (ed.), Structural Materials Handbook, [in Russian], Mashinostroyeniye, Moscow (1990).
V. A. Kolachev, Physical Metallography of Titanium [in Russian], Metallurgizdat, Moscow (1976).
V. A. Kolachev and A. V. Mal'kov, Physical Principles of Fracture of Titanium [in Russian], Metallurgiya, Moscow (1983).
Standard Specifications for Wrought Titanium 6A1-4VELI Alloy for Surgical Implant Application ASTM Designation: F136-92.
P. G. Sanders, G. J. Yongdall, and J. R. Weertman, Mat. Sci. Eng.,A234–236, 77–82 (1997).
V. E. Panin, L. S. Derevyagina, and R. Z. Valiev, Fiz. Met. Metalloved,2, Nos. 1–2, 89–95 (1999).
R. Sh. Musalimov and R. Z. Valiev, Physical Mesomechanics, No. 2, 98–100 (1992).
E. F. Dudarev, O. A. Kashin, Yu. R. Kolobov,et al., Izv. Vyssh. Uchebn. Zaved., Fiz., No. 12, 20–25 (1998).
E. F. Dudarev, Plastic Deformation of Alloys [in Russian], State University, Tomsk (1987).
Additional information
Institute for Strength Physics and Materials Science; Siberian Physical-Technical Institute at Tomsk State University; Institute of Physics of Advanced Materials at UFA Aviation Technology University. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 2, pp. 77–85, January, 2000.
Rights and permissions
About this article
Cite this article
Kolobov, Y.R., Kashin, O.A., Sagymbaev, E.E. et al. Structure and mechanical and electrochemical properties of ultrafine-grained Ti. Russ Phys J 43, 71–78 (2000). https://doi.org/10.1007/BF02513013
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02513013