Abstract
A positional servo-mechanism was designed to facilitate multi-layer electronic control of complex orthotic and prosthetic devices. The design aim was to obtain adequate performance of the system using lightweight, flexible and inexpensive components. The mechanism is actuated by an antagonistic pair of McKibben pneumatic muscles. The muscles are controlled by a pair of twin electro-pneumatic valves operating in an on/off regime. System elements are described in the paper and some relevant design factors pointed out.
Sommaire
Un servo-mécanisme de position a été conçu pour faciliter la commande électronique à plusieurs niveaux d'appareils de prothèse complexes. L'objet des recherches était d'obtenir des performances adéquates en utilisant des composants legers, souples, et de prix réduit. Le mécanisme est actionné par une paire de muscles pneumatiques antagonistes du type McKibben. Les muscles sont commandés par une paire de valves électro-pneumatiques jumelles fonctionnant en tout ou rien. L'unité de commande est un générateur d'impulsions à modulation de fréquence. L'article décrit les différents éléments du système et met en évidence certains détails de conception significatifs.
Zusammenfassung
Ein Lageservomechanismus wurde entwickelt zur Erleichterung mehrstufiger elektronischer Steuerung komplexer orthotischer und prothetischer Geräte. Ziel der Entwicklung war eine adäquate Leistung des Systems unter Verwendung von leichten, flexiblen und preiswerten Bauteilen. Der Mechanismus wird von einem antagonistischen Paar pneumatischer McKibben-Muskeln angetrieben. Die Muskeln werden mit einem Paar elektropneumatischer Doppelventile mit einer Ein/Aus-Steuerung kontrolliert. Eine Kontrollstelle mit Impulsfrequenzmodulation erwies sich als geeignet für die Anwendung. In dieser Mitteilung werden die Systemelemente beschrieben, und einige wesentliche Konstruktionsfaktoren werden erörtert.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Engen, T. (1964–67) Powered upper extremity orthotic development. Progress Reports, Texas Inst. for Rehabilitation and Research.
Gavrilović, M., Marić, M. andVukobratović, M. (1967) An approach to the synthesis of lower-extremity control. The Proceedings of the International Symposium on External Control of Human Extremities, Belgrade, 206–211.
Morecki, A., Ekiel, J. andK. Fidelus (1967) Some problems of controlling a live upper extremity and bioprostheses by myopotential.ibid. The Proceedings of the International Symposium on External Control of Human Extremities, Belgrade, 128–141.
Pavlides, T. andJury, E. (1965) Analysis of a new class of pulse-frequency modulated feedback systems.IEEE Trans. Automatic Control,AC-10, 35–43.
Author information
Authors and Affiliations
Additional information
This work has been supported by the Vocational Rehabilitation Administration Grant No. VRA-YUGO-6-66, Washington, D.C.
Rights and permissions
About this article
Cite this article
Gavrilović, M.M., Marić, M.R. Positional servo-mechanism activated by artificial muscles. Med. & biol. Engng. 7, 77–82 (1969). https://doi.org/10.1007/BF02474672
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02474672