Abstract
The early experimental work of Clark and Wood with regard to von Kármán's theory on the effect of material flow and fracture at high strain rates has led to many controversial issues on these effects. Interest has been greatly revived in recent years because of the increased emphasis on such high-velocity forming processes as explosive and capacitor discharge. Considerable new work has been performed by Ling-Temco-Vought, Inc., for the Air Force, the results of which are presented in this paper. Data have been accumulated on tensile and compression specimens, spherical bulging and cylindrical bulging for a wide variety of materials. This high-speed information has been generated with the use of a special projectile impact machine and special presses utilizing various combinations of explosive and capacitor-discharge energy, with strain rates to 101/sec. The effect of velocity on ductility is discussed for total strain distribution, uniform strain, double necking and critical impact velocity. The modes of failure for various part shapes are presented and related to the forming velocity.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Wood, W. W., et al., “Final Report on Sheet Metal Forming Technology,” Volumes I and II, Contract AF 33(657)-7314, ASD Project No. 7-871 (July 1963).
Wood, W. W., et al., “Advanced Theoretical Formability Manufacturing Technology,” Contract AF 33(657)-10823, ASD Project No. 8-143 (November 1964).
von Kármán, T., “On the Propagation of Plastic Deformation in Solids,” OSRD Report No. 365 (NDRC Report A-29) (January 28, 1942).
Taylor, G. I., “Plastic Wave in a Wire Extended by an Impact Load,” Scientific Papers,1,Cambridge University Press (1958).
Duwez, P. E., “Preliminary Experiments on the Propagation of Plastic Deformation,” NDRC Report A-244 (OSRD No. 3207) (February 1944).
von Kármán, T., Bohnenblust, H. F., and Hyers, D. H., “The Propagation of Plastic Waves in Tension Specimens of Finite Length; Theory and Method of Integration,” OSRD Report No. 946 (NDRC Report A-103) (October 15, 1942).
Bohnenblust, H. F., Charyk, J. V., and Hyers, D. H., “Graphical Solutions for Problems of Strain Propagation in Tension,” OSRD Report No. 1204 (NDRC Report A-131) (January 21, 1943).
Riparbelli, C., “On the Relation Among Stress, Strain and Strain Rate in Copper Wires Submitted to Longitudinal Impact,”Proc. SESA,14,55 (1954).
Sternglass, E. J., andStuart, D. A., “An Experimental Study of the Propagation of Transient Longitudinal Deformations in Elasto-plastic Media,”J.A.M.,20,Trans. ASME,75,427 (1953).
Malvern, L. E., “The Propagation of Longitudinal Waves of Plastic Deformation in a Bar of Material Exhibiting Strain-rate Effect,”J.A.M.,18,Trans. ASME,73,203–208 (1951).
Hauser, F. E., Simmons, J. A., andDorn, J. E., “Strain Rate Effects in Plastic Wave Propagation,”133,3,Metals Research Laboratory, University of California (June1960).
Pearson, J., “Application of Critical Impact Velocity Data to the Explosive Forming of Sheet Metal Parts,” High Energy Rate Metal Forming, Interim Report No. 5, Appendix I, 209.
Clark, D. S., andWood, D. S., “The Tensile Impact Properties of Some Metals and Alloys,”Trans. ASM,42,45 (1950).
White, M. P., and Griffis, L., “The Permanent Strain in a Uniform Bar Due to Longitudinal Impact,” OSRD Report No. 742 (NDRC Report A-71) (July 1942).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Wood, W.W. Experimental mechanics at velocity extremes —Very high strain rates. Experimental Mechanics 7, 441–446 (1967). https://doi.org/10.1007/BF02326303
Issue Date:
DOI: https://doi.org/10.1007/BF02326303