Abstract
A hybrid experimental-numerical procedure, involving moiré interferometry and dynamic finite-element analysis, was used to analyze rapid crack growth in an impact loaded three-point-bend concrete specimen with an offset straight precrack. The dissipated energy rates in the fracture process zone (FPZ), which trails the rapidly extending crack, and in the frontal FPZ ahead of the crack tip, the kinetic-energy rate and energy-release rate were computed. The results showed that while the trailing FPZ was the dominant energy dissipation mechanism, much of the released energy was converted to kinetic energy in the fracturing concrete specimen.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bazant, Z. and Pfeiffer, P.A., “Test of Shear Fracture and Strain-Softening in Concrete,” 2nd Symp. on the Interaction of Non-Nuclear Munitions on Structures, Panama City Beach, FL, 254–264 (1985).
Ingraffea, A.R. and Panthaki, M.J., “Shear Fracture Tests of Concrete Beams,” Finite Element Analysis of Reinforced Concrete Structures, Tokyo, 151–73 (1986).
Van Mier, J.G.M., Schlangen, E. and Nooru-Mohamed, M.B., “Shear Fracture in Cementinious Composites, Part I: Experimental Observations,” Fracture Mechanics of Concrete Structures, ed. Z. Bazant, Elsevier Applied Science, 659–670 (1992).
Swartz, S.E. andTaha, N.M., “Mixed Mode Crack Propagation and Fracture in Concrete,”Eng. Fract. Mech.,35,137–44 (1990).
Reinhardt, H.W., Cornelissen, H.A.W. and Hordjik, D.A., “Mixed Mode Fracture Tests on Concrete,” Fracture of Concrete and Rocks, ed. S.P. Shah and S.E. Swartz, Springer, 119–130 (1990).
Guo, Z.K., Kobayashi, A.S. and Hawkins, N.M., “Mixed Mode Concrete Fracture—An Experimental Analysis,” Fracture Mechanics of Concrete Structures, ed. Z. Bazant, Elsevier Applied Sciences, 695–700 (1992).
Reinhardt, H.W., “Strain Rate Effects on the Tensile Strength of Concrete as Predicted by Thermodynamics and Fracture Mechanics Model,” Cement Based Composites: Strain Rate Effects on Fracture, ed. S. Mindess and S.P. Shah, Material Research Society, 1–13 (1986).
Shah, S.P. and John, R., “Rate-sensitivity of Mode I and Mode II Fracture of Concrete,” Cement Based Composites: Strain Rate Effects on Fracture, ed. S. Mindess and S.P. Shah, Material Research Society, 21–37. (1986).
Bazant, Z. and Gettu, R., “Determination of Nonlinear Fracture Characteristics and Time Dependence From Size Effect,” Fracture of Concrete and Rock; Recent Developments, ed. S.P. Shah, S.E. Swartz and B. Barr, Elsevier Applied Science, 549–565 (1989).
Ross, C.A., Kuennen, S.T. and Tedesco, J.W., “Experimental and Numerical Analysis of High Strain-Rate Concrete Tensile Tests,” Micromechanics of Failure of Quasi-brittle Materials, ed. S.P. Shah, S.E. Swartz and M.L. Wang, Elsevier Applied Science, 353–63 (1990).
Miyamoto, A., King, M.W. and Fujii, M., “Nonlinear Dynamic Analysis of Impact Failure Modes in concrete Structures,” Fracture Mechanics of concrete Structures, ed. Z. Bazant, Elsevier Applied Science, 651–6 (1992).
Yon, J.-H., Hawkins, N.M. andKobayashi, A.S., “Numerical Simulation of Mode I Dynamic Fracture of Concrete,”ASCE J. Eng. Mech.,117 (7),1595–610 (1991).
Yon, J.-H., Hawkins, N.M. andKobayashi, A.S., “Fracture Process Zone in Dynamically Loaded Double-Cantilever Beams,”ACI Materials J.,88 (5),470–9 (1991).
Guo, Z.K., Yon, J.-H., Hawkins, N.M. and Kobayashi, A.S., “Fracture Energy Dissipation Mechanism of Concrete,” to be published in Fracture Mechanics, 23rd Symp., ASTM (1992).
Hillerborg, A., Modeer, M., andPetersson, P.E., “Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Elements,”Cement and Concrete Res.,6,773–82 (1976).
Guo, Z.K., “Experimental and Numerical Characterization of Fracture Behavior of Quasi-Brittle Materials,” PhD thesis submitted to Univ. of Washington (Aug. 1993).
Liaw, B.M., Jeang, J.L., Hawkins, N.M. andKobayashi, A.S., “Fracture Process Zone for Mixed Mode Concrete Fracture,”ASCE J. Eng. Mech.,86 (7),1560–1579 (1990).
Jenq, Y. S. andShah, S. P., “Mixed-Mode Fracture of Concrete,”Int. J. Fract.,38,123–142 (1988).
Hassanzadeh, M., Hillerborg, A., and Zhou, F.P., “Tests of Material Properties in Mixed Mode I and II,” RILEM Report 5, Proc. of SEM-RILEM International Conference on Recent Developments in the Fracture of Concrete and Rock, ed. S.P. Shah and S.E. Swartz, Houston, TX, June 17–19, 353–58 (1987).
Post, D., “Moiré Interferometry,” Handbook on Experimental Mechanics, ed. A.S. Kobayashi, Prentice-Hall, 314–87 (1984).
Dadkhah, M.S., Wang, F.X. andKobayashi, A.S., “Simultaneous On-Line Measurement of Orthogonal Displacement Fields by Moiré Interferometry,”Experimental Techniques,12,28–30 (1988).
Kobayashi, A.S., “Dynamic Fracture Analysis by Dynamic Finite Element Analysis — Generation and Propagation Analyses,” Nonlinear and Dynamic Fracture Mechanics, ed. N. Perrone and S.N. Atluri, ASME AMD-35, 19–36 (1979).
Kobayashi, A.S., Seo, K., Jou, J.Y. andUrabe, Y., “Dynamic analyses of Homalite-100 and Polycarbonate Modified Compact Tension Specimen,”Experimental Mechanics,20 (3),73–9 (1980).
Kobayashi, A.S., Ramulu, M., Dadkhah, M.S., Yang, K-H. andKang, B.S.-J., “Dynamic Fracture Toughness,”Int. J. Fract.,30,275–85 (1986).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yu, CT., Kobayashi, A.S. & Hawkins, N.M. Energy-dissipation mechanisms associated with rapid fracture of concrete. Experimental Mechanics 33, 205–211 (1993). https://doi.org/10.1007/BF02322574
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02322574