Abstract
Epoxy resins of the EBS, a bis-p-phenol S modified diglycidyl ether of bis-p-phenol A and the ESBS, a siloxane modified EBS epoxy resin were prepared. Both structures of EBS and ESBS were elucidated with IR,1H NMR, and13C NMR. The near perpendicular comformation of two phenyl rings of sulfone has been introduced into the epoxy resins of EBS und ESBS for Me increase of Me Tg. Some curing and thermal characteristics of these modified EBS and ESBS epoxy resins were studied. The curing patterns of ESBS and ESBS indicated the similarity with that of the DGEBA epoxy resins. Tg measurements resulted an increasing order of We ESBS (Tg of 141 °C), EBS (Tg of 135 °C) and then followed by Epons 1004 (Tg of 104 °C), 1001 (Tg of 101 °C) and 828 (Tg of 100 °C) in samples tested under the same conditions. Thus the substantial improvement of the thermal stability of the modified epoxy resins was indicated. Compatibility characteristics of the EBS and ESBS as indicated by the SEM/EDS is that an ESBS up to 30 % of the siloxane content was found to be compatible but not miscible with the Epon, a phenolic epoxy resin of DGEBA.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
S. S. Schwanz and S. H. Goodman,Plastic Materials and Processes, Van Nostrand Reinhold Company Inc, New York (1982).
W. Billmeyer, JR,Textbook of Polymer Science, John Wiley & Sons, New York (1984).
H. Lee and K. Neville,Handbook of Epoxy Resins, McGraw-Hill, New York (1966).
T. H. Ho, L. L. Lin, and C. S. Wang,The 16th ROC Polym. Sym.,1, 337 (1993).
F. F. Chang, C. K. Lee, M. L. Lin, and K. L. Chen,The 16th ROC Polym. Sym.,1, 119 (1993).
D. S. Chen, C. C. Ma, H. C. Hsia, W. N. Wang, and S. R. Lin,The 16th ROC Polym. Sym.,2, 1 (1993).
G. S. Wang, T. H. Ho,The 16th ROC Polym. Sym.,2, 1 (1993).
T. Iijima, H. Hiraoka, and J. M. Tomoi,J. of Appl. Polym. Sci.,45, 709 (1992).
K. Yamanaka and T. Inoue,Polymer,30, 662 (1989).
J. L. Herdrick, I. Yilgor, M. Jurek, J. C. Hedrick, G. L. Wilkes, and J. E. McGrath,Polymer,32, 2020 (1991).
C. Bucknall,Toughened Thermoplastic, John Wiley & Sons, New York, (1977).
A. J. Kinloch and R. J. Young,Fracture Behavior of Polymer, Applied Science, New York, (1983).
R. A. Pearson and A. F. Yee,Polym. Eng. Sci. Mater.,63, 311 (1990).
T. H. Ho and C. S. Wang,The 16th ROC Polym. Sym.,2, 477 (1993).
B. Z. Jane, J. Y. Lian, L. R. Hwang, and W. K. Shin,J. Reinf. Plast. Comp.,8, 312 (1989).
C. K. Riew and J. K. Gillham,Rubber-Modified Thermtset Resins, Advence in Chemical Series,208, Amercian Chemical Society, Washington, DC, (1984).
R. S. Bauer, (Ed),Epoxy Resin Chemistry II, ACS Sym. Series,21,American Chemical Society, Washington, DC, (1984).
K. Riew, (Ed),Rubber-Toughened Plastics, Advence in Chemistry Series 222,American Chemical Society, Washington, DC, (1989).
S. K. Huang and F. C. Hong,Proceeding of the 12th ROC Polym. Sym., 224 (1989).
C. Dickinson, J. M. Stewart, and H. L. Ammon,Chem Commun., 921 (1970).
D. Freitag, G. Fengler, Angew. Chem.,103, 1598 (1991).
D. Freitag,Makromol. Chem., Rapid Commun.,12, 95 (1991).
G. Fennhoff, U. Westeppe, U. D. Grigo, K. Freitage,Idel, Ger. Offen DE4029808.
D. Westeppee, D. Wittmann, C. Lindner, T. Eckel,Ger. Offen. DE3914946.
C. L. Aiken, J. S. Mchattie, and D. R. Paul,Macromolecules,95, 2910 (1992).
M. Van Beylen, M. Bolke, S. Bywates, E. Franta, P. Hallpap, J. E. Herz, G. Heublein, J. E. McGrath, P. Rempp, G. Smets, M. Szwarz, D. J. Worsfold, and I. Yilogy,Polysiloxane Copolymer/Anionic Polymerization, Springer-Verlag, New York, (1988).
G. N. Babu, S. S. Christopher, and R. A. Newmark,Marcromolecules,20, 2654 (1987).
M. Kajiyama, M. Kakimoto, and Y. Imai,Macromolecules,22, 4143 (1989).
W. Noll,Chemistry and Technology of Silicones, Academic Press, New York, (1968).
A. L. Smith,Analysis of Silicones, Robert E. Krieger Publishing Company, Florida, (1983).
I. M. Watt,The Principle and Practice of Electron Microscopy, Cambridge University Press, New York, (1985).
S. T. Lin and S. K. Huang,Proceedings of the 15th ROC Polym. Symp.,2, 725 (1992).
K. J. Morgan, J. A. Happe, and E. T. Mores,28th National SAMPE Sym. Anaheim, Calif., April, 12 (1983).
M. N. Matzner, J. E. A. McGrath,Trans. Soc. Rheol.,21, 273 (1977).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lin, ST., Huang, S.K. Synthesis and characterization of siloxane-modified epoxy resin. J Polym Res 1, 151–162 (1994). https://doi.org/10.1007/BF01374090
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01374090