Abstract
Rapid prototyping processes produce parts layer by layer directly from the CAD model. The processes proceed by first slicing the geometric model of a part into layers. A standard interface is necessary to convey varied geometric descriptions from numerous CAD packages to Rapid Prototyping (RP) systems. The STL (STereoLithography) format is the most commonly used interface for this purpose. Unfortunately, it is an approximate model and is frequently not robust. Therefore, other interfaces are proposed to be used for RP systems.
This paper, Part 1, will discuss several existing interfaces including the STL file for the RP systems. The strengths and weaknesses of these formats when used for RP systems are analysed. Furthermore, a new improved format is proposed by the authors in Part 2. In that paper, the design considerations and data structure of the new format are introduced.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. Darrah and M. Wieglus, “A new CAD model format for SFF machine?”The Proceedings of Solid Freeform Fabrication Symposium, pp. 121–125, 1990.
R. T. Wohlers, “CAD meets rapid prototyping”,Computer Aided Engineering, pp. 66–73, April 1992.
J. H. Bohn and M. J. Wozny, “Automatic CAD-model repair shell-closure”.Solid Freeform Fabrication Symposium, pp. 86–94, 1992.
I. Makela and A. Dolenc, “Some efficient procedures for correcting triangulated models”,Solid Freeform Fabrication Symposium, pp. 126–134, 1993.
K. F. Leong, C. K. Chua and Y. M. Ng, “A study of stereolithography file errors and repair. Part 1. Generic solution”,International Journal of Advanced Manufacturing Technology, 12, pp. 407–414, 1996
K. F. Leong, C. K. Chua and Y. M. Ng, “A study of stereolithography file errors and repair. Part 2. Special cases”,International Journal of Advanced Manufacturing Technology, 12, pp. 415–422, 1996
K. Reed, D. Harrvd and W. Conroy,Initial Graphics Exchanges Specification (IGES) version 5.0, CAD-CAM Data Exchange Technical Centre, 1990.
J. H. Li, “Improving stereolithography parts quality — practical solutions”,Proceedings of 3rd International Conference on Rapid Prototyping, pp. 171–179, 1992.
J. Owen,STEP An Introduction, Information Geometers, 1993.
S. Bloor, J. Brown, A. Dolenc, J. Owen and W. Steger, “Data exchange for rapid prototyping”,Summary of EARP investigation presented at Rapid prototyping and manufacturing Research Forum, University of Warwick, Coventry, October, 1994.
Danek Group, “Fused deposition modelling used to aid in design of spinal implants”,Rapid Prototyping Report,14(8), 1994.
I. E. Zank, “Experience of beta users group with Stratasys rapid manufacturing method”,3rd International Conference on Rapid Prototyping, 1992.
B. Swaelens and J. P. Kruth, “Medical application of rapid prototyping techniques”,4th International Conference on Rapid Prototyping, 14–17 June, pp. 107–120, 1993.
W. Vancraen, B. Swawlwns and J. Pauwels, “Contour interfacing in rapid prototyping — tools that make it work”,Proceedings of the 3rd European Conference on Rapid Prototyping and Manufacturing, pp. 25–33, 1994.
Brite EuRam, Common layer interface (CLI), Version 1.31.Brite EuRam Project BE2578 “RPT — Development and Integration of Rapid Prototyping Techniques for the Automotive Industry”, 1994.
M. J. Wozny, “Systems issues in solid freeform fabrication”,Proceedings of Solid Freeform Fabrication Symposium, pp. 1–15, 1992, Texas, USA.
S. J. Rock and M. J. Wozny, “A flexible file format for solid freeform fabrication”,Proceedings of Solid Freeform Fabrication Symposium, pp. 155–160, 1991, Texas, USA.
A. Dolenc and I. Malela, “Leaf: a data exchange format for LMT processes”,3rd International Conference on Rapid Prototyping, pp. 4–12, 1992, Dayton, USA.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kai, C.C., Jacob, G.G.K. & Mei, T. Interface between CAD and Rapid Prototyping systems. Part 1: A study of existing interfaces. Int J Adv Manuf Technol 13, 566–570 (1997). https://doi.org/10.1007/BF01176300
Issue Date:
DOI: https://doi.org/10.1007/BF01176300