Abstract
The various areas involved in the casting process of aluminium alloys are all interrelated with each other and revolve around one primary concern: the hydrogen content present in the molten alloy prior to and during casting and its consequential effect on the porosity and quality of the cast product. Focusing on this concern, the present article reviews the problems associated with the production of aluminium alloy castings, in particular those areas on which the hydrogen content has a direct bearing. Current procedures in each area are discussed.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
D. E. J. Talbot,Int. Metall. Rev. 20 (1975) 166.
F. O. Traenkner,Modern Casting (1981) 44.
E. F. Emley andP. A. Fisher,J. Inst. Met. 85 (1956–57) 236.
W. Baukloh andF. Oesterlen,Z. Metallkde 30 (1938) 386.
M. B. Bever andC. F. Floe,Trans. AIME 156 (1944) 149.
C. E. Ransley andH. Neufeld,J. Inst. Met. 74 (1948) 599.
W. R. Opie andN. J. Grant,Trans. AIME 188 (1950) 1237.
J. Koeneman andA. G. Metcalfe,Trans. ASM 51 (1959) 1072.
C. L. Thomas,Trans. AIME 239 (1967) 485.
W. Eichenauer, K. Hatenbach andA. Pebler,Z. Metallkde 52 (1961) 684.
W. Eichenauer,ibid. 59 (1968) 613.
F. G. Jones andR. D. Pehlke,Met. Trans. 2 (1971) 2655.
D. E. J. Talbot andP. N. Anyalebechi,Mater. Sci. Technol. 4 (1988) 1.
J. Czochralski,Z. Metallkde 14 (1922) 227.
K. Iwasé,Sci. Rep. Tôhoku Imp. Univer. 15 (1926) 531.
P. Röntgen andH. Braun,Metallwirtschaft 11 (1932) 459.
P. Röntgen andF. Möller,ibid. 13 (1934) 81.
L. L. Bircumshaw,Trans. Faraday Soc. 31 (1935) 1439.
H. Winterhager,Alum. Arch. 12 (1938) 7.
W. Baukloh andM. Redjali,Metallwirtschaft 21 (1942) 683.
A. Sieverts,Z. Metallkde 21 (1929) 37.
C. E. Ransley, D. E. J. Talbot andH. C. Barlow,J. Inst. Met. 86 (1957–58) 212.
C. E. Ransley andD. E. J. Talbot,ibid. 84 (1955–56) 445.
P. D. Hess,J. Met. 25 (1973) 46.
W. Eichenauer andA. Pebler,Z. Metallkde 48 (1957) 373.
C. E. Ransley andD. E. J. Talbot,ibid. 46 (1955) 328.
R. Eborall andC. E. Ransley,J. Inst. Met. 71 (1945) 525.
K. E. Honer andZ. Youling,Giessereiforschung 39 (1987) 34.
R. Y. Lin andM. Hoch,Met. Trans. A 20A (1989) 1785.
M. Hoch andI. Arpshofen,Z. Metallkde 75 (1984) 23.
J. R. Denton andJ. A. Spittle,Mater. Sci. Technol. 1 (1985) 305.
S. Jacob,Fonderie 363 (1977) 13.
J. Charbonnier, J. J. Perrier andR. Portalier,AFS Int. Cast. Met. J. 3 (1978) 87.
Y. Koya,Imono (J. Jpn. Foundrymen's Soc.) 52 (1980) 558.
B. Closset andJ. E. Gruzleski,AFS Trans. 89 (1981) 801.
P. D. Hess andE. V. Blackmun,ibid. 83 (1975) 87.
K. Alker andV. Hielscher,Aluminium 48 (1972) 362.
K. E. Honer,Giessereiforschung 34 (1982) 1.
B. Closset andJ. E. Gruzleski,Met. Trans. A 13A (1982) 945.
S. M. D. Glenister andR. Elliott,Met. Sci 15 (1981) 181.
J. Gorbrecht,Giesserei 65 (1978) 158.
P. C. Borbe et al., ibid. 69 (1982) 393.
P. Davami andM. Ghafelehbashi,Br. Foundryman 72 (1979) 4.
J. E. Gruzleski, Proceedings of the 2nd International Conference on Molten Aluminium Processing, Orlando; Florida, November 6–7, 1989, American Foundrymen's Society, Dés Plaines, Illinois (1989) p. 1–1.
F. C. Dimayuga, N. Handiak andJ. E. Gruzleski,AFS Trans. (1988) 83.
H. Shahani,Scand. J. Metall. 14 (1985) 306.
S. Yaneva, N. Stoichev andL. Stoyanova,Tekh. Misul. 26 (1989) 103.
M. Hashemi-Ahmady,Diss. Abst. Int. 49 (1989) 367.
N. Tenekedjiev, D. Argo andJ. E. Gruzleski,AFS Trans. 97 (1989) 127.
G. K. Sigworth,ibid. 95 (1987) 303.
W. Eichenaueur andJ. Markopoulos,Z. Metallkde 65 (1974) 649.
C. J. Smithells, “Metals Reference Book”, 5th Edn (But-terworths, London, 1975).
M. Mokaram, PhD Thesis, Brunel University, London (1976).
L. M. Foster,et al.,Nucleonics 21 (1963) 53.
J. O'. M. Bokris andP. K. Subramanyan,J. Electrochem. Soc. 118 (1971) 1114.
J. F. Newman andL. L. Shreir,Corros. Sci. 11 (1971) 25.
F. R. Coe andJ. Moreton,J. Iron Steel Inst. 204 (1966) 366.
F. De Kazinczy,Acta Metall. 7 (1959) 525.
R. A. Oriani,ibid. 18 (1970) 147.
T. Boniszewki andJ. Moreton,Br. Weld. J. 14 (1967) 321.
M. L. Hill andE. W. Johnson,Trans. AIME 221 (1961) 622.
T. Ishikawa andR. B. McLellan,Acta Metall. 34 (1986) 1091.
C. E. Ransley andD. E. J. Talbot,J. Inst. Met. 88 (1959–60) 150.
J. E. Harris andP. G. Partridge,ibid. 93 (1964–65) 15.
B. Chew,Met. Sci. J. 5 (1971) 195.
D. E. J. Talbot andD. A. Granger,J. Inst. Met. 92 (1963–64) 290.
K. J. Brondyke andP. D. Hess,Trans. Met. Soc. AIME 230 (1964) 1542.
S. A. Levy,AFS Trans. 93 (1985) 889.
W. Hufnagel,Aluminium 59 (1983) 266.
J. E. Gruzleski, N. Handiak, H. Campbell andB. Closset,AFS Trans. 94 (1986) 147.
J. P. Martin, F. Tremblay andG. Dubé,Light Metals (1989) 903.
D. A. Anderson, D. A. Granger andR. R. Avery,ibid. (1990) 769.
J. A. Rogers,Foundry Trade J. 151 (1981) 3216.
W. D. Lamb,Light Metals (1984) 1345.
F. Degreve andC. Jardin,Met. Trans. B6B (1975) 545.
F. Degréve,J. Met. (1975) 21.
R. D. Pehlke, Foundry Processes: Their Chemistry and Physics, G. Katz and C. F. Landefeld (eds) General Motors Research Laboratories, Warren, Michigan, September 1986 (Plenum Press, New York, 1988) pp. 427–445.
Q. T. Fang, P. N. Anyalebechi andD. A. Granger,Light Metals (1988) 977.
D. E. J. Talbot andD. A. Granger,J. Inst. Met. 92 (1963–64) 290.
R. L. Coble andM. C. Flemings,Met. Trans. A 2A (1971) 409.
H. Fredriksson andI. Svensson,Met. Trans. B 7B (1976) 599.
P. M. Thomas andJ. E. Gruzleski,ibid. 9B (1978) 139.
S. N. Tiwari andJ. Beech,Met. Sci. 12 (1978) 356.
J. E. Gruzleski, P. M. Thomas andR. A. Entwhistle,Br. Foundryman 71 (1978) 69.
F. Weinberg andD. A. Hirschfeld,Met. Sci. 13 (1979) 335.
M. Abbas, G. R. St-Pierre andC. E. Mobley,AFS Trans. 94 (1986) 47.
T. S. Piwonka andM. C. Flemings,Trans. Met. Soc. AIME 236 (1966) 1157.
J. Campbell,Cast Met. Res. J. 4 (1969) 1.
Idem, Trans. Met. Soc. AIME 239 (1967) 138.
Idem, “The Solidification of Metals”, Publication 110 (Iron and Steel Institute, London, 1967) p. 18.
K. Kubo andR. D. Pehlke,Met. Trans. B. 16B (1985) 359.
H. Fredriksson,ibid. 7B (1976) 599.
D. Argo andJ. E. Gruzleski,AFS Trans. 96 (1988) 65.
Q. T. Fang andD. A. Granger,ibid. 97 (1989) 989.
D. R. Poirier, K. Yeum andA. L. Maples,Met. Trans. A. 18A (1987) 1979.
K. Murakami, C. Y. Liu andT. Okamoto, in “Solidification Processing”, edited by J. Beech and H. Jones (Institute of Metals, London, 1988) p. 454.
Q. T. Fang andD. A. Granger,Light Metals, (1989) 927.
M. F. Jordan,et al.,J. Inst. Met. 91 (1962–63) 48.
K. Ohsasa, T. Ohshima andT. Takahashi,J. Jpn. Inst. Light Met. 39 (1989) 109.
K. Kubo andR. D. Pehlke,AFS Trans. 94 (1986) 753.
J. Zou, K. Tynelius, S. Shivkumar andD. Apelian, in “Production, Refining, Fabrication and Recyling of Light Metals”, edited by M. Bouchard and P. Tremblay, (Pergamon, New York, 1990) p. 323.
B. R. Deoras andV. Kondic,Foundry Trade J. 100 (1956) 361.
R. Entwhistle, J. E. Gruzleski andP. M. Thomas, in Proceedings of Conference on Solidification and Casting of Metals, University of Sheffield, July 1977 (The Metals Society, London, 1977) p. 345.
A. A. Khomitskii,Liteinoe Proizvodstvo No. 7 (1988) 11.
T. J. Hurleu andR. G. Atkinson,AFS Trans. 93 (1985) 291.
B. Kolte,Modern Casting (1985) 33.
D. Argo andJ. E. Gruzleski, in Proceedings of International Symposium on Reduction and Casting of Aluminium, Montreal, Canada, August 1988 (Pergamon, New York, 1988) p. 263.
J. E. Gruzleski, N. Handiak, H. Campbell andB. Closset,AFS Trans. 94 (1986) 167.
B. Closset andJ. E. Gruzleski, in Proceedings of 56th World Foundry Congress, Düsseldorf, May 1989, paper no. 32 (1989).
M. D. Hanna, S. Lu andA. Hellawell,Met. Trans. A 15A (1986) 459.
S. C. Flood andJ. D. Hunt,Met. Sci. 15 (1981) 287.
G. K. Sigworth, S. Shivkumar andD. Apelian,AFS Trans. 97 (1989) 811.
H. Iwahori, K. Yonekura, Y. Yamamoto andM. Nakamura,ibid.,98 (1990) 167.
Idem., Imono 61 (1989) 31.
Y. W. Lee, E. Chang andC. F. Chieu,Met. Trans. B 21B (1990) 715.
W. Michels andS. Engler,Giessereiforschung 41 (1989) 174.
B. L. Tuttle, A. Keslinke, D. Twarog andE. Daniels,AFS Trans. 97 (1989) 889.
M. Garat, “Hypo-Eutectic Al-Si Alloys, Control of the Eutectic Structures” (Aluminium Pechiney, Pechiney, 1980).
F. L. Arnold andJ. S. Prestley,AFS Trans. 69 (1961) 129.
A. J. Clegg andA. A. Das,Br. Foundryman 70 (1977) 56.
J. Charbonnier,AFS Trans. 92 (1984) 907.
B. E. Carlson andR. D. Pehlke,ibid. 97, (1989) 903.
J. H. O'dette,Trans. AIME 208 (1957) 924.
A. N. Turner andA. J. Bryant,J. Inst. Met. 95 (1967) 353.
O. Kubaschewski,et al., “Gases and Metals” (Iliffe, London, 1970).
D. Stein,AFS Trans. 88 (1980) 631.
G. K. Sigworth,ibid. 95 (1987) 73.
J. C. Jaquet andH. J. Huber,Geissereiforschung 38 (1986) 11.
M. Tsukuda, T. Suzuki, I. Fukui andM. Harada,J. Jpn. Inst. Met. 29 (1979) 437.
C. Vass, in Proceedings of Conference on International Molten Metal Processing, American Foundrymen's Society, Des Plaines, Illinois (1986) p. 101.
U. Honma andS. Kitaoka,Aluminium 60 (1984) E780.
G. K. Sigworth, in Proceedings of Conference on International Molten Metal Processing, American Foundrymen's Society, Des Plaines, Illinois (1986) p. 75.
A. Saigal,AFS Trans. 94 (1986) 219.
S. Shivakumar, S. Ricci Jr,B. Steenhoff, D. Apelian andG. Sigworth,ibid. 97 (1989) 791.
N. Fat-Halla, in Proceedings of Conference, “Current Advances in Mechanical Properties and Production III”, Cairo University, Cairo, Egypt, December 1985 (1985) p. 28.
G. K. Sigworth,AFS Trans. 91 (1983) 7.
N. L. Kutsenok, I. N. Ganiev andV. N. Yanchuk,Metallovedemie i Termicheskaya Obrabotka Metallov No. 2, (February 1987) 45.
P. Reznicek andM. Holmanova,Slevarenstvi 34 (1986) 108.
Traenkner,Modern Casting (October 1982) pp. 36–37.
J. A. Eady andD. M. Smith,Mater. Forum 9 (1986) 217.
I. Miki andT. Kido,Die-Cast Eng. (April 1974) 22.
T. E. Gebhard Jr,Cast. Eng. (Spring 1976) 16.
G. M. Glenn,SAMPE Quart. (1976) 1.
S. N. Tiwari, A. K. Gupta andS. L. Malhotra,Br. Foundryman 79 (1986) 129.
E. Scheuer,J. Inst. Met. 85 (1956–57) 521.
V. K. Afanas'ev andA. N. Prudnikov,Liteinoe Proivodstvo No. 9 (1988) 12.
W. R. Opie andN. J. Grant,Foundry 78 (1950) 104.
R. W. Ruddle andA. Cibula, (Institute of Metals, London, 1965).
R. K. Owens,et al.,AFS Trans. 65 (1957) 424.
R. Jay andA. Cibula,Foundry Trade J. 101 (1956) 131, 407.
M. K. Surappa, E. Blank andJ. C. Jaquet,Scripta Metall. 20 (1986) 1281.
C. W. Booth andA. J. Clegg,Br. Foundryman 77 (1984) 96.
A. G. Szekely, in Proceedings of 2nd International Aluminium Extrusion Technology Seminar, Vol. 1 (1977) p. 35.
M. V. Brant, D. C. Bone andE. F. Emley,Met. Soc. AIME, TMS Paper No. A70-51 (1970).
G. W. M. vanWijk andD. M. Ackermann,Light Metals 2 (1978) 235.
G. K. Sigworth,Modern Casting (March 1988) (1988) 42.
D. W. Pattle,Foundryman 81 (1988) 232.
O. G. Gjosteen et al. TMS Paper No. 71-39 (1971).
C. S. Sivaramakrishnan andR. K. Mahanti,NML Tech. J. 26 (1984) 5.
W. Schaefers, J. G. Kruger andT. Steinhauser,Giesserei 73 (1986) 432.
A. Choudhury andM. Lorke,Aluminium 65 (1989) 462.
S. L. Archbutt,J. Inst. Met. 227 (1925) 33.
P. M. Hulme,Steel 119 (15) (1946) 108.
Idem, ibid. 119 (16) (1946) 110.
B. A. Baum, K. T. Kurochkinand P. V. Umrikhin,Izvest. Vuz-Chern. Met. (1961) 22.
W. Geller,Z. Metallkde 35 (1943) 213.
R. D. Pehlke andA. L. Bement Jr,Trans. Met. Soc. AIME (1962) 1237.
J. Botor,Prace Inst. Met. Niezel. 7 (1978) 1.
Idem, Aluminium 56 (1980) 519.
G. K. Sigworth andT. A. Engh,Met. Trans. B. 13B (1982) 447.
Idem, Scand. J. Metall. 11 (1982) 143.
T. A. Engh andT. Pedersen,Light Metals (1984) 1329.
R. J. Adamo andC. L. Brooks,Met. Soc. AIME, TMS Paper No. 72-80 (1972).
A. Kaye,Foundry Trade J. 164 (1983) 3261.
A. L. Zolotoi, K. N. Militsyn andO. P. Naumkin,Sov. Cast Technol. 5 (1988) 55.
J. E. Dore, J. C. Yarwood andJ. A. Ford,Light Metals, AIME 2 (1976) 567.
H. O. Titze,ibid. 2 (1973) 451.
G. D. Denyer,Rev. Metallurgie 59 (1962) 857.
J. E. Dore, P. E. Sevier andJ. C. Yarwood, US Patent No. 3 854934 (1974).
F. R. Mollard andN. Davidson,AFS Trans. 86 (1978) 501.
A. G. Szekely, US Patent 3 227 547 (1966).
M. J. Bruno, N. Jarrett, B. L. Slaugenhaupt andR. E. Graziano, US Patent 3 839019 (1974).
M. Garat,Hommes et Fonderie (December 1989) 17.
A. R. Anderson,AFS Trans. 95 (1987) 533.
J. M. Fuqua,ibid. 95 (1987) 635.
R. J. Harriss,Foundry Trade J. (10 March 1989) 148.
J. T. Bopp, D. V. Neff andE. P. Stankiewicz,Light Metals (1987) 729.
S. Kastner andJ. Kruger,Aluminium,58 (1982) E52.
Yazana et al. in Proceedings of 4th International Conference on Vacuum Metallurgy, Tokyo, 1973 (1973) p. 86.
G. S. Makarov et al., “Legirovonie i Obrabolka Legkikh Splavov” (Alloy and Treatment of Light Alloys) (Nauk, Moscow, 1981) p. 66 (in Russian).
W. Hilgenfeldt andI. Hilpmann,Giessereitechnik 28 (1982) 40.
T. Curavic, “Giesserei Fachtagung”, Portoz, Jugoslavia (1983).
“Vakuum-Entgasungsanlagen für Aluminium and Aluminium legierungen” (Leybold AG, Hanau, 1984).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Samuel, A.M., Samuel, F.H. Various aspects involved in the production of low-hydrogen aluminium castings. J Mater Sci 27, 6533–6563 (1992). https://doi.org/10.1007/BF01165936
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01165936