Conclusions
The particle shape of a powder produced by the atomization of a molten metal with water under high pressure, unlike that of a powder atomized with a compressed gas, is determined by the actual density of the energy carrier (the steam:water ratio) in the contact zone, and can vary within wide limits, from spherical to jagged. The actual density of an energy carrier consisting of water and steam is a function of the temperature of the melt and also of the pressure of the water and the geometry of the atomizing device.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Literature cited
O. S. Nichiporenko and Yu. I. Naida, Poroshkovaya Met., No. 10 (1968).
O. S. Nichiporenko, Poroshkovaya Met., No. 12 (1968).
O. S. Nichiporenko, Poroshkovaya Met., No. 6 (1974).
Machine Designer's Handbook [in Russian], Vol. 2, Mashgiz, Moscow (1954), p. 143.
O. S. Nichiporenko, “Mechanism of disintegration of melts with water,” Proceedings of the 12th All-Union Conference on Powder Metallurgy [in Russian], Vol. 2, Izd-vo LatINTI, Riga (1975), p. 10.
S. S. Kutateladze, Heat Transfer during Condensation and Boiling [in Russian], Mashgiz, Moscow (1952).
A. F. Chudnovskii, Heat Exchange in Dispersed Media [in Russian], GITTL, Moscow (1954).
Problems of Heat Exchange during a Change in the State of Aggregation of Matter [in Russian], Sb. Tr. GÉI, Moscow (1953).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 9(165), pp. 5–10, September, 1976.
Rights and permissions
About this article
Cite this article
Nichiporenko, O.S. Shaping of powder particles during the atomization of a melt with water. Powder Metall Met Ceram 15, 665–669 (1976). https://doi.org/10.1007/BF01157829
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01157829