Abstract
A series of networks of diverse crosslink density were prepared using bifunctional epoxide prepolymers of different molecular weight, crosslinked with diamine diphenyl sulphone, and their fracture behaviour investigated. The same set of resins was also modified with a reactive rubber. The fracture toughness regularly decreased on increasing the crosslink density for all formulations. The addition of the rubber gave rise to a marked increase in toughness, though it magnified the influence of the molecular weight of the prepolymer. Tests performed with blunt notches showed that the fracture toughness was maximum at medium crosslink densities. A dispersion of rubber particles caused a toughness increase through the formation of microcavities ahead of the crack tip. Failure was preceded by a rapid volume increase caused by void coalescence.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
A. V. Tobolsky, D. V. Carlson andN. Indictor,J. Polym. Sci. 54 (1961) 175.
D. Katz andA. V. Tobolsky,J. Polym. Sci. A 2 (1964) 1595.
Idem., ibid. 2 (1964) 1587.
A. V. Tobolsky, D. Katz, M. Takahashi andR. Schaffhauser,ibid. 2 (1964) 2749.
L. E. Nielsen,J. Macromol. Sci. C-3 (1969) 69.
V. B. Gupta, L. T. Drjal, C. Y. Lee andM. J. Rich,J. Macromol. Sci. Phys. B23 (1984–85) 435.
T. G. Fox andS. Loshaek,J. Polym. Sci. 15 (1955) 371.
T. Murayama andJ. P. Bell,J. Polym. Sci. A-2 6 (1970) 437.
C. L. Lau, K. A. Hodd andW. W. Wright,B. Polym. J. 18 (1986) 316.
J. P. Bell,J. Appl. Polym. Sci. A-2 6 (1970) 417.
Idem., ibid. 14 (1970) 1901.
A. J. Kinloch andJ. G. Williams,J. Mater. Sci. 15 (1980) 987.
S. L. Kim, M. D. Skibo, J. A. Manson, R. W. Hertzberg andJ. Janiszewski,Polym. Eng. Sci. 18 (1978) 1093.
A. J. Kinlock, S. J. Shaw, D. A. Tod andD. L. Hunston,Polymer 24 (1983) 1341.
A. J. Kinlock, S. J. Shaw andD. L. Hunston,ibid. 24 (1983) 1355.
G. Levita andE. Butta,La Chimica e L'Industria 66 (1984) 233.
G. Levita, A. Marchetti andE. Butta,Polymer 26 (1985) 1110.
G. Levita, A. Marchetti, A. Lazzeri andV. Frosini,Polym. Compos. 8 (1971) 141.
G. Levita,ACS Polym. Preprints 29 (1988) 175.
A. F. Yee andR. A. Pearson, in Proceedings of 2nd International Conference on Toughening of Plastics II (London, 1985) p. 2/1.
A. G. Atkins andY. W. May, “Elastic and Plastic Fracture” (Ellis Horwood, Sect. 2.9 Chichester, 1985).
D. H. Kaelble, “Computer Aided Design of Polymers and Composites” (Dekker, New York, 1985) Sect. 5.3.
L. M. Brown andJ. F. Embury, in Proceedings of 3rd Conference on Strength of Metals and Alloys Vol. 1 (The Institute of Metals, Cambridge, 1973) p. 164.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Levita, G., De Petris, S., Marchetti, A. et al. Crosslink density and fracture toughness of epoxy resins. J Mater Sci 26, 2348–2352 (1991). https://doi.org/10.1007/BF01130180
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01130180