Abstract
The fracture of a Cu-Be alloy was examined in various loading modes. For the tensile mode, two degrees of ageing were also tested. The common fracture mode was defined as a dimpled intergranular, and its relation to the precipitate morphology is discussed.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
G. F. Bolling,Phil. Mag. 4 (1959) 537.
A. T. Thomas,ibid. 5 (1960) 947.
R. B. Jones andV. A. Philips,Trans. ASM 53 (1960) 603.
B. Djuric andM. Jovanovic,Metallography 13 (1980) 235.
R. J. Rioja andD. E. Laughlin,Acta Metall. 28 (1980) 1301.
P. Wilkes andM. M. Jackson,Met. Sci. J. 3 (1969) 130.
A. R. Entwisle andJ. K. Wynn,J. Inst. Metals 89 (1960/61) 24.
P. A. Beck,J. Appl. Phys. 20 (1949) 666.
F. Sachslehner, V. Groger andF. Stangler,Met. Sci. 18 (1984) 153.
W. Bonfield andB. C. Edwards,J. Mater. Sci. 9 (1974) 398.
Idem. ibid. 9 (1974) 409.
Idem. ibid. 9 (1974) 415.
G. Adam, Y. A. Rosenthal andG. Kohn,Intell. Instr. Comp. 61 (1988) 13.
M. M. Markovitch, Y. Rosenthal andG. Adam,J. Test. Eval. 15 (1987) 265.
D. R. Ireland, in Proceedings of the CSNI Specialist Meeting No. 67 on Instrumented Charpy Testing, Palo Alto, November 1981, EPRI report NP-2102-LD, edited by R. A. Wullaert (Electrical Power Research Institute, Palo Alto, 1981) p. 1.
W. Shang-Xiam, in Proceedings of the Symposium on Chevron Notched Specimens: Testing and Stress Analysis, STP-855, Louisville, April 1983, edited by J. H. Underwood, S. W. Freiman and F. I. Baratta (ASTM, Philadelphia, 1983) p. 176.
H. Kreye,Z. Metallkde. 62 (1971) 556.
M. Markovitch, P. Cohen, R. Frenkel, S. Nahmias andE. Pollak, in Research Laboratories Annual Report, January–December 1971, report IA-1262 (Israel Atomic Energy Commission, 1972) p. 58.
Y. Mishima andR. Shiromizu,Trans. Metall. Soc. AIME 242 (1968) 751.
M. Nakagawa,Jpn. J. Appl. Phys. 4 (1965) 760.
A. A. Gadalla,Ind. J. Pure Appl. Phys. 18 (1980) 307.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Rosenthal, Y. Mechanical properties and fracture characteristics of aged Cu-1.8 wt% Be-0.2 wt% Co alloy in various loading modes. J Mater Sci 27, 2193–2198 (1992). https://doi.org/10.1007/BF01117936
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01117936