Abstract
The preferred process for the production of cuprous oxide powder is via the anodic dissolution of copper in alkaline solution of sodium chloride. The principal reactions are as follows:
In the present investigation the basic electrode processes were studied systematically under a broad range of conditions using linear sweep voltammetry. Variables studied include the concentration of sodium chloride and sodium hydroxide (i.e., alkalinity), temperature of the solution, two categories of additives (an inhibitor for preventing the deposition of spongy metallic copper powder on the cathodes, and a chemical reducing agent for reducing the cupric ions to the cuprous state), and the effect of carbonate ions (resulting from the spontaneous absorption of carbon dioxide from the air by sodium hydroxide). Useful guidelines concerning the electrolysis conditions, additives, and the concentration limit of carbonate ions have been established. The proper operating conditions can be considered to be as follows: 80–85°C, NaCl 240–260 gl−1, NaOH below 1 gl−1. Conditions pertaining to the use of additives are the following: calcium gluconate 0–5 gl−1, Na2CrO4 below 0.5 gl−1, Na2Cr2O7 below 0.25 gl−1, NH2OH·HCl below 2.5 gl−1, N2H4·H2O below 2.5 gl−1, sucrose 0–5 gl−1. Special attention must be given to eliminate or reduce the presence of carbonate ions in the electrolyte below 0.25 gl−1 Na2CO3.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
S. S. Naboichenko, A. B. Lebed, L. L. Ermakova and E. Z. Kharitidi,Tsvetn. Met. (1987) (9) 30.
R. Palanisamy, K. C. Narasimham, R. Viswanathan and H. V. K. Udupa,Indian Journal of Technology 22 (1984) 319.
L. L. Ermakova, V. V. Puzakov and A. D. Lanskikh,Tsvetn. Met. (1986) (7) 35.
Z. Stankovic, V. Zlatkovic, M. Pjescic, P. Zivkovic, Z. Matic and S. Zivic,Tehnika (Belgrade) 32 7–8 (1977) 16.
L. D. Cahue and S. M. Castro,Bol. Soc. Chil. Quim. 27 (1982) 337.
G. V. Koreshkov, V. D. Bokash, A. E. Sokolov and B. I. Korobitsgn, (Ural Scientific Research institute for the Copper Industry), USSR 815085 (Cl. C25 B1/00), March (1981).
R. E. Gana, Research Report on Electrochemical Production of Cuprous Oxide Powder in Anode-Support System, Universidad Catolica de Chile, Santiago, Chile, March (1989).
V. F. Vetere and R. Romagnoli,Ind. Eng. Chem. Prod. Res. Dev. 23 (1984) 656.
,J. Chem. Tech. Biotechnol. 34A (1984) 335.
C. Y. Yang, J. L. Zhao, S. Wang, B. K. Liu, Z. W. Kong, D. S. Shi, W. F. Jin, Y. J. Wang, J. S. Xia and Y. Luo,Huaxue Shijie 23 (1982) 66;Chem. Abstr. 100 (1984) 93378a.
L. L. Ermakova and V. V. Puzakov,Tsvetn. Met. (1986) (10) 25.
A. G. Sokokovski, I. B. Markov, V. Ya. Aleksandrov, E. V. Sokolovskaya and B. P. Matseevskii,Khim. Tekhnol. Khim. (1974) 102.
Idem. A. G. Sokokovski, I. B. Markov, V. Ya. Aleksandrov, E. V. Sokolovskaya and B. P. Matseevskii,ibid. Khim. Tekhnol. Khim. (1974) 108.
C. Y. Fu and D. J. ZhengJ. of Central-South Institute of Mining and Metallurgy (People's Republic of China) (1980) (3) 12.
M. Braun and K. Nobe,J. Electrochem. Soc. 126 (1979) 1666.
C. H. Bonfiglio, H. C. Albaya and O. A. Cobo,Corros. Sci. 13 (1973) 717.
L. Brossard,J. Electrochem. Soc. 130 (1983) 403.
H. P. Lee and K. Nobe,130 (1983) 403.
G. N. Shivrin, T. A. Godovitskaya and I. I. Smirnov,Izv. V.U.Z. Tsvetn. Met. (1986) (4) 25.
A. Moreau,Electrochim. Acta 26 (1981) 1609.
A. Moreau, J. P. Frayret, F. Del Rey and R. Pointeau,27 (1982) 1281.
H. Lal and H. R. Thirsk,J. Chem. Soc. (1953) 2638.
A. L. Bacarella and J. C. Griess, Jr.,J. Electrochem. Soc. 120 (1973) 459.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ji, J., Cooper, W.C. Electrochemical preparation of cuprous oxide powder: Part I. Basic electrochemistry. J Appl Electrochem 20, 818–825 (1990). https://doi.org/10.1007/BF01094312
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01094312