Abstract
The problem of local simulation of stagnation point heat transfer to a blunt body is solved within the framework of boundary layer theory on the assumption that the simulation subsonic high-enthalpy flow is in equilibrium outside the boundary layer on the model, while the parameters of the natural flow are in equilibrium at the outer edge of the boundary layer on the body. The parameters of the simulating subsonic flow are expressed in terms of the total enthalpyH 0, the stagnation point pressurep w and the velocityV 1 for the natural free-stream flow in the form of universal functions of the dimensionless modeling coefficientsξ=R *m /R *b (ξ ≤ξ.<1),ζ=V 1/√2H 0 ξ (ζ ≤ ζ.<1) whereR *m and R *b are the effective radii of the model and the body at their stagnation points. Approximate conditions for modeling the heat transfer from a high-enthalpy (including hypersonic) flow to the stagnation point on a blunt body by means of hyposonic (M≪1) flows, corresponding to the case ζ2≪1, are obtained. The possibilities of complete local simulation of hypersonic nonequilibrium heat transfer to the stagnation point on a blunt body in the hyposonic dissociated air jets of a VGU-2 100-kilowatt induction plasma generator [4, 5] are analyzed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Yu. V. Polezhaev and F. B. Yurevich,Thermal Protection [in Russian], Énergiya, Moscow (1976).
V. P. Agofonov and M. M. Kuznetsov, “Complete simulation of steady heat fluxes in subsonic and hypersonic flow over catalytic surfaces,”Chislennye Metody Mekh. Splosh. Sredy. Novosibirsk,11, 5 (1980).
M. N. Kogan and N. K. Makashev, “Modeling the catalytic properties of surfaces,”Uch. Zap. TsAGI,11, 47 (1980).
A. F. Kolesnikov and M. I. Yakushin, “Simulating natural heat transfer processes in high-frequency induction plasma generators,” in:Gagarin Lectures in Astronautics and Aviation 1987 [in Russian], Nauka, Moscow (1988), p. 97.
A. F. Kolesnikov and M. I. Yakushin, “Conditions of simulation of hypersonic convective nonequilibrium heat transfer in induction plasma generators,”Teplofiz. Vys. Temp.,26, 742 (1988).
J. A. Fay and F. R. Riddell, “Theory of stagnation point heat transfer in dissociated air,”J. Aeronaut. Sci.,25, 73 (1958).
R. Goulard, “On catalytic recombination rates in hypersonic stagnation heat transfer,”Jet Propul.,28, 737 (1958).
V. V. Lunev,Hypersonic Aerodynamics [in Russian], Mashinostroenie, Moscow (1975).
G. G. Chernyi,Gas Dynamics [in Russian], Nauka, Moscow (1988).
A. S. Predvoditelev, E. V. Stupochenko, A. S. Pleshanov,et al., Tables of Thermodynamic Functions of Air (for Temperatures from 200 to 6000‡K and Pressures from 0.00001 to 100 atm) [in Russian]. Computer Center of the USSR Academy of Sciences, Moscow (1962).
A. S. Predvoditelev, E. V. Stupochenko, E. V. Samuilov,et al., Tables of Thermodynamic Functions of Air (for Temperatures from 6000 to 12000‡K and Pressures from 0.001 to 1000 atm) [in Russian], USSR Academy of Sciences, Moscow (1957).
P. N. Baronets, A. N. Gordeev, A. F. Kolesnikov,et al., “Development of heat-shield materials for the “Buran” orbiter in induction plasma generators,” in:Gagarin Lectures in Astronautics and Aviation 1990, 1991 [in Russian], Nauka, Moscow (1991), p. 41.
A. F. Kolesnikov and V. S. Shelin, “Numerical analysis of the accuracy of simulation of hypersonic heat transfer in subsonic dissociated nitrogen jets,”Izv. Akad. Nauk SSSR, Mekh. Zhidk. Gaza, No. 2, 135 (1990).
A. F. Kolesnikov, V. S. Nikol'skii, and V. S. Shelin, “Accuracy of simulation of hypersonic stagnation point heat transfer in subsonic flows,” in:Modern Problems of Fluid Mechanics. Abstracts of Proceedings of the Fifth All-Union School-Seminar [in Russian], Computer Center of the Siberian Division of the USSR Academy of Sciences, Irkutsk (1990), p. 179.
Author information
Authors and Affiliations
Additional information
Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.1, pp. 172–180, January–February, 1993.
Rights and permissions
About this article
Cite this article
Kolesnikov, A.F. Conditions of simulation of stagnation point heat transfer from a high-enthalpy flow. Fluid Dyn 28, 131–137 (1993). https://doi.org/10.1007/BF01055676
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01055676