Article PDF
Avoid common mistakes on your manuscript.
Literature cited
É. Ch. Pioro, A. G. Zherdin, N. Ch. Pioro, et al., “Investigation of the properties of pulverized iron powder with ramified particle shape,” Poroshk. Metall., No. 10, 1–7 (1984).
A. V. Laptev, “Elaboration of an experimental installation for impulse vacuum drop-forging of powders based on high melting compounds,” in: Elaboration and Investigation of New Materials and Composites Based on Them, Institut Problem Materialovedeniya AN UkrSSR, Kiev (1980), pp. 148–152.
GOST 9454-78. Method of Impact Bending Tests at Low, Room, and Elevated Temperatures. Valid from January 1, 1981.
GOST 25281-82. Powder Metallurgy. Methods of Determining the Density of Moldings. Valid from January 1, 1981.
I. I. Ivanova, A. N. Demidik, A. S. Drachinskii, et al., “The mechanism of plastic deformation and failure of sintered iron containing disperse particles of titanium dioxide,” Poroshk. Metall., No. 7, 69–72 (1983).
M. L. Bernshtein and V. A. Zaimovskii, The Structure and Mechanical Properties of Materials [in Russian], Metallurgiya, Moscow (1970).
V. V. Skorokhod and S. M. Solonin, The Physicometallurgical Fundamentals of Sintering Powders [in Russian], Metallurgiya, Moscow (1984).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 7(307), pp. 28–33, July, 1988.
Rights and permissions
About this article
Cite this article
Firstov, S.A., Podrezov, Y.N., Zherdin, A.G. et al. Effect of the type of powdered iron and of the regimes of hot drop forging on the impact toughness of compacts. Powder Metall Met Ceram 27, 527–531 (1988). https://doi.org/10.1007/BF00799983
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00799983