Article PDF
Avoid common mistakes on your manuscript.
Literature cited
T. Ya. Kosolapova, T. V. Andreeva, T. S. Barnitskaya, et al., Nonmetallic High Melting Compounds [in Russian], Metallurgiya, Moscow (1985).
G. G. Gnesin, I. I. Osipova, V. P. Yaroshenko, et al., “Optimization of the properties of tool material based on silicon nitride,” Poroshk. Metall., No. 2, 48–52 (1978).
P. A. Boiko, A. N. Stepanchuk, N. S. Vdovichenko, and D. B. Dzhelilov, “The effect of borides of transition metals on the structure and the physicomechanical properties of boron carbide,” in: New Technological Processes in Powder Metallurgy, Institut Problem Materialovedeniya AN UkrSSR, Kiev (1986), pp. 65–70.
G. N. Makarenko, T. Ya. Kosolapova, and É. V. Marek, “Wear-resistant high-temperature materials based on boron carbide,” in: High Melting Borides and Suicides [in Russian], Naukova Dumka, Kiev (1977), pp. 92–97.
G. C. Wel and P. F. Becher, “Improvements in mechanical properties in SiC by the addition of TiC particles,” J. Am. Ceram. Soc., No. 8, 571–574 (1984).
M. A. Janney, “Mechanical properties and oxidation behavior of a hot-pressed SiC-15 vol.% TiB2,” J. Am. Ceram. Soc., No. 2, 325–329 (1987).
K. J. Faber and A. G. Evans, “Observations of intergranular, crack-deflection toughening in SiC,” J. Am. Ceram. Soc., No. 6, 94–96 (1983).
R. W. Rice, “Ceramic matrix composite toughening mechanism,” Ceram. Eng. Proc. Sci.,6, No. 7–8, 589–607 (1985).
K. Niihara, R. Morena, and D. P. H. Hasselman, “Evaluation of K1C of brittle solids by the indentation method with low crack-to-indent ratios,” J. Mater. Sci.,1, No. 1, 13–16 (1982).
G. A. Gogotsi, Some Results of the Study of the Mechanical Properties of Structural Ceramics in Connection with Engine Parts [in Russian], Preprint No. 1986, AN UkrSSR, Institut Problem Prochnosti, Kiev (1983).
S. Prochazka, S. L. Dole, and C. I. Hejna, “Abnormal grain growth and microcracking in boron carbide,” J. Am. Ceram. Soc.,68, No. 9, C-235–C-236 (1985).
R. Angers and M. Beauvy, “Hot-pressing of boron carbide,” Ceram. Int.,10, No. 2, 49–55 (1983).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 7(331), pp. 38–43, July, 1990.
Rights and permissions
About this article
Cite this article
Grigor'ev, O.N., Koval'chuk, V.V., Zametailo, V.V. et al. Structure, physicomechanical properties, and special features of failure of hot-pressed boron carbide base ceramics. Powder Metall Met Ceram 29, 543–547 (1990). https://doi.org/10.1007/BF00796068
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00796068