Article PDF
Avoid common mistakes on your manuscript.
Literature cited
V. I. Trefilov, Yu. V. Mil'man, I. V. Gridneva, et al., “Dependence of the mechanical properties of brittle covalent crystals on the structural factors,” Bul. Soc. Chim.,47, No. 7, 361–367 (1982).
D. P. Uskokovich, G. V. Samsonov, and M. M. Ristić, Activated Sintering [in Russian]. Fac. Electronics, NISh and International Institute for the Science of Sintering, Belgrade (1974).
V. V. Skorokhod, V. V. Panichkina, and M. Pavicevic, “Redistribution of nickel during activated sintering of tungsten with nickel additive,” Sci. Sintering, No. 1, 7–12 (1984).
K. D. Lanam, F. C. H. Yeh, J. E. Kovsek, et al., “Homogenization of compacted blends of Ni and Mo powders,” Met. Trans.,6A, No. 2, 337–341 (1975).
R. E. W. Gasselton and W. Hume-Rothery, “The equilibrium diagram of the system Mo-Ni,” J. Less Common Met.,7, No. 3, 212–221 (1964).
F. Shank, Structure of Binary Alloys [Russian translation], Metallurgiya, Moscow (1973).
C. P. Heywegan and G. D. Rieck, “Diffusion in the Mo-Ni, Mo-Fe, and Mo-Co system,” Acta Met.,22, No. 10, 1269–1281 (1974).
S. B. Shoemaker and D. P. Shoemaker, “The crystal structure of theδ-phase of Mo-Ni,” Acta Cryst.,16, 997–1009 (1963).
V. I. Trefilov, Yu. V. Mil'man, and S. A. Firstov, Physical Principles of the Strength of Refractory Metals [in Russian], Naukova Dumka, Kiev (1975).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 2(290), pp. 55–59, February, 1987.
Rights and permissions
About this article
Cite this article
Mil'man, Y.V., Ristić, M.M., Gridneva, I.V. et al. Structure and hardness of sintered Mo-Ni alloys. Powder Metall Met Ceram 26, 144–148 (1987). https://doi.org/10.1007/BF00794133
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00794133