Conclusions
-
1.
An analysis is made of various methods of calculating compressibility curves for porous bodies sintered from plastic metal powders. It is shown that the best approximation to experimental results is given by the method based on the use of rms viscous stresses and strains and on allowance for strain strengthening and macrodefectiveness of structure.
-
2.
Taking into account the nonuniformity of strain due to density variations in compacts enables calculated results to be brought closer to experimental data obtained at low pressures.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Literature cited
V. V. Skorokhod and I. F. Martynova, “Irreversible deformation of a sintered porous body of a work-hardening plastic metal (Part I),” Poroshk. Metall., No. 4, 70–74 (1977).
I. F. Martynova, V. V. Skorokhod, and S. M. Solonin, “Physicomechanical properties of volume-strained sintered porous nickel (Part I),” Poroshk. Metall., No. 8, 79–83 (1975).
I. F. Martynova, V. V. Skorokhod, S. M. Solonin, and G. R. Fridman, “Physicomechanical properties of volume-strained sintered porous nickel (Part II),” Poroshk. Metall., No. 9, 72–76 (1975).
S. I. Evlash, I. F. Martynova, V. V. Skorokhod, and S. M. Solonin, “Physicomechanical properties of volume-strained sintered porous nickel (Part III),” Poroshk. Metall., No. 11, 72–76 (1975).
V. V. Skorokhod, Rheological Principles of Sintering Theory [in Russian], Nauk. Dumka, Kiev (1972).
C. G. Goetzel, Treatise on Powder Metallurgy, Interscience Publishers, New York (1949).
H. Unckel, Arch. Eisenhuettenwesen,18, 161–170 (1945).
P. Duwez and L. Zwell, J. Metals, Trans.,1, No. 2, 137–142 (1949).
M. Yu. Bal'shin, Metal Powder Science [in Russian], Metallurgizdat, Moscow (1948).
I. F. Martynova, V. V. Skorokhod, and S. M. Solonin, “Plastic deformation in the pressing of powders of ductile metals,” Poroshk. Metall., No. 3, 40–46 (1974).
R. J. Green, “Theory of plasticity of porous bodies,” in: Mechanics [Russian translation], Vol. 4 (1973), pp. 109–120.
G. Bockstiegel, “Relations between pore structure and densification mechanism in the compacting of iron powders (Communication II),” Intern. J. Powder Metall.,3, No. 1, 29–37 (1967).
A. Ya. Artamonov, Effect of Processing Parameters on the Physicomechanical Conditions of Sintered Materials [in Russian], Nauk. Dumka, Kiev (1965).
A. V. Tret'yakov and V. I. Zyuzin, Mechanical Properties of Metals and Alloys in Plastic Working [in Russian], Metallurgiya, Moscow (1973).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 5(173), pp. 62–69, May, 1977.
Rights and permissions
About this article
Cite this article
Skorokhod, V.V., Martynova, I.F. & Shklyarenko, V.P. Irreversible deformation of a sintered porous body of a work-hardening plastic metal II. Experimental part. Powder Metall Met Ceram 16, 369–375 (1977). https://doi.org/10.1007/BF00791089
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00791089