Article PDF
Avoid common mistakes on your manuscript.
Literature cited
Ya. G. Grishkovets, L. I. Pinskaya, and A. D. Andreev, “Means of increasing the workability of ingots in pipe production”, in: Technology of Manufacturing Semifinished Products of Aluminum Alloys [in Russian], No. 1, Tsvetmetinformatsiya (1964).
V. I. Dobatkin, Ya. G. Grishkovets, and V. I. Yakovlev, “Extrudability of metal in relation to conditions of homogenizing the ingot”, in: Metal Science of Light Alloys [in Russian], Nauka, Moscow (1969), p. 137.
Ya. G. Grishkovets and Yu. L. Rubin, “Effect of cooling rate after homogenization of ingots on the quality of tubing of alloy D16”, Tsvetnye Met., No. 11, 89 (1966).
Ya. G. Grishkovets, V. G. Davydov, M. F. Zakharov, et al., “Technology of quenching sections of alloys D16, AD31, and 01320 in the process of extrusion”, Tekhnol. Legkikh Splavov, No. 4, 32 (1981).
S. M. Voronov, Selected Works on Light Alloys [in Russian], Oborongiz, Moscow (1957).
L. V. Budanova, G. N. Kurdyumova, and N. N. Malyutina, “High-temperature homogenization and capacity for plastic deformation of alloy AMG6”, Tekhnol. Legkikh Splavov, No. 6, 8 (1980).
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 8, pp. 37–39 August, 1983.
Rights and permissions
About this article
Cite this article
Grishkovets, Y.G., Budanova, L.V. & Morgacheva, D.A. Structural changes in ingots of aluminum alloys during homogenization. Met Sci Heat Treat 25, 604–607 (1983). https://doi.org/10.1007/BF00741923
Issue Date:
DOI: https://doi.org/10.1007/BF00741923