Abstract
To the end of 1974 the scientific literature contained over 1200 articles on electrochemical machining (ECM) [1]. Additionally approximately 100 papers appeared in 1975. Although a large number of those references appeared in what might be described as ‘non-learned’ journals, this still leaves the potential student with a difficult task if he wishes to review the state of the art. This is the first attempt to review thoroughly the literature in this field, although only a small proportion of those contributions are considered pertinent. The review will take the following form: after an introductory chapter there will be two chapters on dissolution kinetics, the second concerned with the kinetics as affected by the physical characteristics of the electrolyte; this will be followed by a section on the effects of electrochemically machined surface on the physical properties of a metal. Chapters 5 and 6 will deal with tool design and the optimizing of process parameters, after which will be a review of topics concerned with the application of ECM.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. Bannard and L. Bannard, ‘Bibliography of Electrochemical Machining’, Department of Metallurgy and Materials Science, University of Nottingham, (1975).
V. N. Gusev and L. A. Rozhkov, Authors Certificate 28384 (1928).
V. N. Gusev, Brit. Pat. 335003 (1928).
Y. N. Petrov and A. L. Vishnitski,Elektronnaya Obrabot. Mat. 5 (1967) 36.
I. I. Moroz,Zh. Vsesoy, Khim. Obsh. D.I. Mendeleev,8 (1964) 544.
idem, Stanki i Instrument9 (1967) 36.
Y. S. Volkov,ibid 9 (1967) 33.
A. H. Bagramyan,Elekronnya Obrabot. Mat. 5 (1968) 21.
E. Y. Grodzinsky,Fizika i Khim Obrabot. Mat. 5 (1968) 52.
V. S. Krylov, A. D. Davydov and J. Kozak,Elektrokhimiya 11 (1975) 1155.
J. H. Crawford, SAE Paper 505C (1962).
N. D. G. Mountford,Trans. Inst. Metal Finishing,40 (1963) 171.
A. E. Debarr, NewScientist,23 Part 398 (1964) 40.
Idem, Metalworking Prod.108 (1964) 66.
J. A. Gurklis, Defence Materials Inf. Centre, Report 213 (1965).
D. L. Norwood, ASTME Tech. Paper MR66-157 (1966).
Idem, Machinery (London)109 (1966) 239.
J. A. Cross, ASTME Tech. Paper MR67-640 (1967).
P. J. Boden and P. A. BrookThe Production Engineer (1969) 408.
P. A. Brook,Metals and Materials,3 (1969) 359.
J. P. Hoare and M. A. Laboda,Scient. Am. 230 (1974) 30.
A. D. Davydov and V. D. Kashcheev,Itogi Nauki i Teknici Elektrokhimiya,9 (1974) 154.
A. E. Debarr and D. A. Oliver, ‘Electrochemical Machining’, McDonald, London, (1968). Reprinted by M.T.I.R.A., Macclesfield, England.
J. F. Wilson, ‘Practice and Theory of Electrochemical Machining’, Wiley, New York, (1971).
J. A. McGeough, ‘Principles of Electrochemical Machining’ Chapman and Hall, London, (1974).
W. B. Stevenson,Products Finishing,26 (1962) 36.
M. Schmeisser, H. Latka and N. Bemelmans,Ind. Anz. 89 (1967) (23), 37.
P. Warburton,Prod. Eng. 44 (1965) 520.
J, Throop, ASTME Tech. Paper SP66-41 (1965).
B. S. Miller,Metalworking,22 (1966) 50.
A. L. Livshits,Stanki i Instrument 1 (1967) 14.
B. R. Lazarenko,Elekronnaya Obrabot. Mat. 5 (1967) 3.
L. Y. Popilov, ‘Electrophysical and electrochemical machining of materials’ Mashinostroenya, Moscow (1969).
M. Pourbaix, ‘Atlas of Electrochemical Equilibria’ Pergamon, London (1966).
U. R. Evans,Electrochim. Acta 16 (1971) 1825.
H. H. Uhlig,Trans. Electrochem. Soc. 85 (1944) 307.
K. Schwabe,Angewandte Chem. (Int. Edition)5 (1966) 185.
K. E. Heusler,Z. Elektrochem. 62 (1958) 582.
Idem, Chem. Ing. Tech.36 (1964) 589.
P. A. Jacquet,Metal Finishing,47 (1949) 48.
H. F. Walton,J. Electrochem. Soc. 97 (1950) 219.
J. M. West, ‘Electrodeposition and Corrosion Processes’, Van Nostrand London, (1970).
M. Cole and T. P. Hoar, CITCE 8 (Now ISE) Butterworth, London, (1958) p. 115.
T. P. Hoar and T. W. Farthing,Nature 169 (1952) 324.
T. P. Hoar and J. A. S. Mowat,Nature 165 (1950) 64.
M. Turner and P. A. Brook,Electrodeposition and Surface Treatment,2 (1973/4) 245.
D. Landolt, R. H. Müller and C. W. Tobias,J. Electrochem. Soc. 118 (1971) 40.
Idem, ibid116 (1969) 1384.
K. Kinoshita, D. Landolt, R. H. Müller and C. W. Tobias,ibid 117 (1970) 1246.
T. P. Hoar, D. C. Mears and G. P. Rothwell,Corr. Sci. 5 (1965) 279.
T. P. Hoar and D. C. Mears,Proc. Roy. Soc. 294A (1966) 486.
T. P. Hoar,Coor. Sci. 7 (1967) 341.
J. M. Evans and P. J. Boden ‘Fundamentals of Electrochemical Machining’, Electrochemical Society, (1971).
T. P. Hoar,Discussions Faraday Society 1 (1947) 299.
Idem, ‘Modern Aspects of Electrochemistry, Vol. 2’, (Ed. J. O'M. Bockris), Butterworths, London (1959).
I. L. Rozenfeld and I. S. Danilov,Zashch. Metallov. 2 (1966) 134.
M. Pourbaix,International Conf. Localised Corrosion, Williamsburg, Virginia, (1971).
V. Ashworth, P. J. Boden, J. S. L. Leach and A. Y. Nehru,Corr. Sci. 10 (1970) 481.
U. F. Franck,Proc. 1st Int. Corr. Congress, London, (1961).
T. P. Hoar,Trans. Farady Soc. 33 (1937) 1152.
H. W. Pickering and R. P. Frankenthal,Int. Conf. Localised Corrosion, Williamsburg, Virginia, (1971).
V. M. Novakowski and A. N. Sorokina,Corr. Sci. 6 (1966) 227.
J. M. Kolotyrkin,Zashch. Metallov. 1 (1965) 161.
D. M. Brasher,Brit. Corr. J. 2 (1967) 95.
J. B. Cotton and I. Dugdale,Corr. Sci. 4 (1964) 397.
S. Ito and K. Chikamori,J. Mech. Lab. (Tokyo)17 (1963) 9.
S. Ito, H. Yamamoto and K. Chikamori,ibid 21 (1967) 103.
S. Ito and H. Yamamoto,ibid 22 (1968) 149.
G. A. Alexeev, Yu. S. Volkov, M. A. Monina and I. I. Moroz,Fiz. i Khim. Obrabot Mat. 5 (1968) 31.
A. D. Davydov, L; L. Knots, V. D. Kashcheev and V. V. Kushnev,Elektronnaya Obrabrot. Mat. 2 (1969) 82.
K. Chikamori and S. Ito,J. Mech. Lab. (Tokyo)22 (1968) 155.
J. P. Hoare, M. A. Laboda, M. L. MacMillan and A. J. Wallace,J. Electrochem. Soc. 116 (1969) 199.
J. P. Hoare,ibid 117 (1970) 142.
K. Chikamori and S. Ito,Denki Kagaku 38 (1970) 492.
D. T. Chin, ‘Fundamentals of ECM’ Electrochem. Soc. (1971).
K-W. Mao,J. Electrochem. Soc. 120 (1973) 1056.
A. J. Levin, M. A. Evseeva and A. V. Nechaev,Elektronnaya Obrabot. Mat. 5 (1973) 5.
G. N. Zaidman and A. I. Loskutov,ibid 5 (1973) 18.
J. P. Simpson and P. A. Brook,J. Appl. Electrochem. 4 (1974) 163.
A. D. Davydov, A. N. Kamkin, S. V. Klopova and V. D. Kashcheev,Electronnaya Obrabot. Mat. 6 (1973) 28.
Yu. S. Volkov, M. A. Monina and I. I. Moroz,ibid. 3 (1972) 11.
Brit. Pat. 1031663.
O. A. Vodyanitsky, M. A. Monina and I. I. Moroz,Fiz. i Khim. Obrabot. Mat. 11 (1968) 45.
K-W. Mao,J. Electrochem. Soc. 118 (1971) 1870.
Idem, ibid118 (1971) 1876.
K-W. Mao, M. A. Laboda, and J. P. Hoare,ibid 119 (1972) 419.
D-T. Chin,ibid 119 (1972) 1181.
D-T. Chin and A. J. Wallace,ibid 120 (1973) 1487.
K-W. Mao and D-T. Chin,ibid 121 (1974) 191.
D-T. Chin and K-W. Mao,J. Appl. Electrochem. 4 (1974) 155.
J. P. Hoare,Nature 219 (1968) 1034.
P. J. Boden and J. M. Evans,ibid 222 (1969) 377 andElectrochim. Acta 16 (1971) 1071.
A. D. Davydov, A. D. Romashkan, M. A. Monina and V. D. Kashcheev,Elektrokhimiya 10 (1974) 1681.
E. S. Varenki, V. P. Galushko, N. D. Koshmanenko and F. M. Kiselchuck,Elektronnaya Obrabot. Mat. 2 (1974) 49.
M. Datta and D. Landolt,J. Electrochem. Soc. 122 (1975) 1466.
D. Landolt.Chem.-Ing. Tech. 45 (1973) 188.
J. P. Hoare, K-W. Mao and A. J. Wallace,Corrosion 27 (1971) 211.
D-T. Chin.J. Electrochem. Soc. 119 (1972) 1043.
J. P. Hoare, K-W. Mao and A. J. Wallace,Corr. Sci. 12 (1972) 571.
N. J. Pryor and M. Cohen,J. Electrochem. Soc. 100 (1953) 203.
J. P. Hoare and K-W. Mao,ibid 120 (1973) 1452.
K-W. Mao and D-T. Chin.ibid 121 (1974) 191.
M. A. Laboda, A. J. Chartrand, J. P. Hoare, C. R. Wiese and K-W. Mao,ibidJ. Electrochem. Soc. 120 (1973) 643.
K. J. Vetter, ‘Electrochemical Kinetics’, Academic, New York, (1967).
D. Landolt,J. Electrochem. Soc. 119 (1972) 708.
H. E. Freer, J. B. Hanley and G. D. S. McLellan, ‘Fundamentals of Electrochemical Machining’, Electrochem. Soc. (1971).
J. P. Hoare and C. R. Wiese,Corr. Sci. 15 (1975) 435.
J. A. Gurklis, ASTME, Tech. Paper EM67-641 (1967).
Anon,Tool Manufac. Eng. 58 (1967) 82.
A. D. Davydov, V. D. Kashcheev, and V. P. Krivenky,Elektronnaya Obrabot. Mat. 1 (1973) 5.
D. J. Royer, J. Kleinberg and A. W. Davidson,J. Inorg. Nucl. Chem. 4 (1957) 115.
T. V. Kuleshova,Elektronnaya Obrabot. Mat. Part 6 (1968) 24.
J. Bannard,J. Appl. Electrochem. 4 (1974) 229.
K. Chikamori and S. Ito,Denki Kagaku 39 (1971) 493.
Brit. Pat. 1033005.
K-W. Mao and J. P. Hoare,Corr. Sci. 13 (1973) 799.
A. G. Atanasyants, A. F. Ivanovsky, D. Ya. Dlugach and Ts. O. Georgiev,Zhur. Fiz. Khim. 48 (1974) 366.
N. A. Amirkhanova, A. K. Zhuravski and N. G. Uskova,Elektronnaya Obrabot. Mat. 6 (1972) 19.
Brit. Pat. 958401.
Brit. Pat. 985158.
V. D. Kulagin,Elektronnaya Obrabot. Mat. 5 (1971) 16.
P. A. Brook and Q. Iqbal,J. Electrochem. Soc. 116 (1969) 1458.
J. Bannard,J. Appl. Electrochem. 4 (1974) 117.
V. I. Mutsianko, E. S. Stepanov and T. V. Kuleshova,Elektronnaya Obrabot. Mat. 2 (1973) 89.
A. N. Belyakova, A. D. Davydov, B. N. Kabanov and V. D. Kashcheev,Fiz. i. Khim. Obrabot. Mat. 2 (1969) 49.
A. D. Davydov and B. N. Kabanov,Elektronnaya Obrabot Mat. 2 (1974) 10.
A. D. Davydov and V. D. Kashcheev,Fiz. i. Khim. Obrabot. Mat. 5 (1968) 40.
A. D. Davydov, B. N. Kabanov and V. D. Kascheev,ibid 1 (1970) 48.
V. N. Misra, P. R. Khangaonkar and V. M. Dokras,J. Inst. Eng. (India)50 (1969) (2) 6.
H. Yamamoto and S. Ito,J. Mech. Lab. (Tokyo)4 (1970) 224.
Brit. Pat. 936871.
Brit. Pat. 1257061.
V. V. Parshutin and Yu. N. Petrov,Elektronnaya Obrabot. Mat. 6 (1969) 17.
I. A. Menzies and A. F. Averill,Electrochim. Acta.13 (1968) 807.
I. A. Menzies, D. Geary and G. B. Griffin,J. Electrochem. Soc. 117 (1970) 849.
J. E. Bannard, P. J. Boden and P. A. Brook,I.E.E. Conf. Publ. 133 (1975) 147.
Brit. Pat. 1359104.
N. H. Cook, S. P. Loutrel and M. C. Meslink,M.I.T. Report AD659004 (Jan. 1967).
D. G. Lovering, 23rd ISE Meeting, Stockholm (1972) Abstr. p. 103.
D. L. Piron, S. Asakura and K. Nobe,Int. Symp. Metal-Slag-Gas reactions, Electrochem Soc. (1975) 625.
R. K. Flatt and P. A. Brook,Corr. Sci. 11 (1971) 185.
R. A. Robinson and R. H. Stokes, ‘Electrolyte Solutions’, Butterworth, London (1959) 466.
A. D. Davydov, E. Ya. Grodzinski and A. N. Kamkin,Elektrokhimiya 9 (1973) 518.
N. Shikata, S. Ito and K. Kikuchi,Bull. Jap. Soc. Pree. Eng. 3 (1969) 61.
B. P. Saushkin, G. N. Korchagin and G. V. Kuleshov,Elektronnaya Obrabot. Mat. 1 (1974) 21.
Ya. N. Petrov, G. N. Zaidman and B. P. Saushkin,ibid 5 (1974) 17.
B. P. Saushkin,ibid 2 (1975) 21 and 3 (1975) 14.
S. Ito, K. Honda and T. Hayashi,J. Mech. Lab. (Tokyo)18 (1964) (5) 7.
V. A. Timoveev, V. V. Klokov, and V. P. Smolentsov,Elektronnaya Obrabot. Mat. 6 (1972) 10.
Ya. N. Petrov, G. N. Zaidman, B. P. Saushkin and N. A. Ferdman,ibid 1 (1975) 24.
F. V. Sedykin, L. B. Dmitriev, V. V. Borodin and V. V. Lyubimov,ibid 1 (1973) 11.
A. I. Levin and A. V. Nechaev,ibid 1 (1971) 12.
N. H. Cook, G. B. Foote, P. Jordan and B. N. Kalyani,J. Eng. Ind (1973) 945.
C. F. Noble and S. J. Shine,J. Appl. Electrochem. 5 (1975) 215.
K. S. Indira, S. K. Rangarajan and K. S. G. Doss,J. Electroanal. Chem. 21 (1969) 49.
J. Postlethwaite and A. Kell,J. Electrochem. Soc. 119 (1972) 1351.
J. Cooper, R. H. Müller and C. W. Tobias, ‘Fundamentals of Electrochemical Machining’, Electrochem. Soc. (1971).
J. Hopenfeld and R. R. Cole,J. Eng. Ind. (1966) 455.
V. V. Klokov and V. P. Smolentsov,Elektronnaya Obrabot. Mat. 4 (1972) 13.
G. N. Zaidman, V. V. Parshutin and Yu. N. Petrov,Fiz. i. Khim. Obrabot. Mat. 2 (1969) 53.
D. Landolt, R. Acosta, R. H. Müller and C. W. Tobias,J. Electrochem. Soc. 117 (1970) 839.
J. W. Throop, ASTME, Tech. Paper MR69-573 (1969).
T. P. Lohouse,ibid MR67-645 (1967).
W. P. Huhn,ibid MR67-646 (1967).
F. A. Pitschke,ibid MR65-115 (1965).
Yu. S. Volkov and I. I. Moroz,Elektronnaya Obrabot. Mat. 5 (1968) 17.
S. P. Loutrel and N. H. Cook, ASME Publ. No. 3 (1973).
K. Seimija and S. Ito,J. Mech. Eng. Lab. (Tokyo)26 (1972) (2) 69.
V. P. Kiselev,Elektronnaya Obrabot. Mat. 1 (1970) 19.
V. V. Grigorev, V. A. Shmanov, and Ya. A. Sirazh,ibid 4 (1968) 19.
K. Seimiya and S. Ito,Bull. Jap. Soc. Proc. Eng. 4 Part 2 (1970) 49.
S. Ito, K. Chikamori, A. Kogure and T. Mori,J. Mech. lab. (Tokyo)19 Part 2 (1965) 17.
S. Ito, K. Chikamori and F. Sakurai,ibid 20 Part 2 (1966) 1.
G. E. Gadd,Nature 212 (1966) 874.
L. Kops and V. B. Quach,Proc. N. Am. Metalwork Res. Conf. (May 1973) p. 159.
Idem304/5 (1975) 16.
D. K. Pramanik, R. A. Agarural and A. K. De,Machinery (London)126 (1975) 224.
C. N. Larsson and T. Pyle, ‘Fundamentals of electrochemical machining’, Electrochem. Soc. (1971).
G. N. Zaidman, V. V. Parshutin and Yu. N. Petrov,Fiz. i. Khim. Obrabot. Mat. 6 (1968) 41.
G. N. Zaidman, G. L. Mochalova and Yu. N. Petrov,ibid 1 (1970) 36.
A. D. Davydov, G. N. Korchagin and V. D. Kashcheev,Elektronnaya Obrabot. Mat. 4 (1975) 9.
J. W. Cuthbertson and T. S. Turner,The Production Engineer (May 1966) 270.
R. M. Wolosewicz, ASTME, Tech. Paper MR70-220 (1970).
E. Rössner and L. Franke,Technik. 26 (1971) 504.
S. P. Loutrel and N. H. Cook, ASME Publ. No.1 (1973).
Brit. Pat. 954557.
J. Bannard,J. Appl. Electrochem. 5 (1975) 43.
H. Dietz, K. Otto and G. Stark,V.D.I. Zeit 109 (1967) 1057.
F. V. Sedykin,Elektronnaya Obrabot. Mat. 2 (1967) 24.
V. D. Kashcheev, S. V. Klopova and A. D. Davydov,ibid 1 (1969) 12.
L. A. Williams,I.E.E.E. Trans. Ind. Electr. 10 (1963) 101.
Brit. Pat. 1317945.
Brit. Pat. 1320000.
Brit. Pat. 1041766.
Brit. Pat. 1072952.
S. Ito, K. Chikamori and F. Sakurai,J. Mech. Lab. (Tokyo)20 (1966) 146.
V. V. Morosov, E. I. Pupkov, B. L. Orlov and V. I. Gnidin,Technol. Mashinstr. Tula21 (1971) 66.
M. Minca,Constr. Masini 25 (1973) 665.
Brit. Pat. 1240929.
U. Buttner,Technik 21 (1966) 554.
V. V. Vasilev and Yu. M. Sukhorukov,Stankt i Instr. 9 (1975) 28–9.
Brit. Pat. 789293.
Brit. Pat. 1074749.
B. I. Morozov and G. N. Zaidman,Elektronnaya Obrabot. Mat. 4 (1973) 17; and B. I. Morozov,ibid 6 (1974) 26.
N. A. Amirkhanova, Ya. M. Bikbaev, N. Z. Gimaev and A. M. Myzdrikov,ibid (1975)1 15.
N. I. Ivanov, V. P. Rassakazov and F. V. Sedykin, Sedykin,Fiz. i. Khim. Obrabot. Mat. 1 (1969) 38.
G. V. Chaika,Elektronnaya Obrabot. Mat. 6 (1970) 23.
L. M. Kovalev,Vestnik. Mashinostroeniya 54 (1974) (4) 77.
T. M. Mercer,Metal Progr. 97 (1970) 136.
Brit. Pats. 1301189, 1115409, 1004009, 1239963.
N. G. Kharlan, A. A. Mamakov, A. N. Yagubets and V. V. Karyakin,Elektronnaya Obrabot. Mat. 5 (1969) 47.
Brit. Pat. 970436.
W. Mauz,VDI (Ber.)240 (1975) 51.
Brit. Pat. 1252691.
S. Ito, K. Honda and F. Sakurai,J. Mech. Lab. (Japan)11 (1965) 67.
Yu. N. Petrov and G. L. Mochalova,Elektronnaya Obrabot. Mat. 1 (1968) 15.
V. V. Parshutin and G. N. Zaidman,ibid 18 Part 4 (1966) 26.
G. L. Mochalova,Fiz. i. Khim. Obrabot. Mat. 1 (1970) 52.
Idem, Fiz.-Khim. Mekhan. Mat.6 (1970) 101.
A. B. Dmitriev, A. A. Eliseev, N. N. Kharitonov and N. V. Romanov,Elektronnaya Obrabot. Mat. 3 (1972) 8.
L. M. Voronenko and I. I. Moroz,ibid 1 (1970) 25.
L. M. Voronenko, A. D. Davydov and V. D. Kashcheev,Fiz. i. Khim. Obrabot. Mat. 5 (1972) 133.
G. Pahlitzsch, and E. Dreesmann,Z. Wirt. Fertigung 68 (1913) 409.
G. L. Mochalova,Elektronnaya Obrabot. Mat. 5 (1969) 34.
J. P. Hoare, A. J. Chartrand and M. A. Laboda,J. Electrochem. Soc. 120 (1973) 1071.
K. Mirumachi and K. Hijikata,J. Jap. Soc. Powder Met. 18 (1972) 18.
V. V. Parshutin, Yu. N. Petrov and A. I. Loskutov,Elektronnaya Obrabot. Mat. 3 (1970) 15.
Yu. Petrov and V. V. Parshutin,ibid 4 (1972) 22.
O. P. Gamov,ibid 3 (1973) 18.
H. Reinhart and W. Grünwald,Werkstoff u. Betrieb. 95 (1962) 212.
‘Electrochemical treatment of metals’, Kishinev, Izdatel'stvo Shtiintsa (1971).
J. F. Kahles,Tool Prod. 36 (1970) 61.
J. F. Kahles and M. Field, SME Tech. paper IQ 71-240.
G. Bellows, ASTME, Tech. Paper MR68-518 (1968).
G. Bellows,Tool Manufac. Eng. 61 (1968) (3) 66.
J. Frisch and R. R. Cole, ASME Paper 61-WA-94 (1961) andEng. Ind. 84 (1962) 483.
R. C. Movich, ASTME, Tech. Paper MR69-110 (1969).
M. Field, J. F. Kahles and W. P. Koster,ibid MR67-142 (1967).
J. M. Evans, P. J. Boden and A. A. Baker, ‘Proc. 12th Int. Machine Tool Design and Research Conference’, Macmillan, London (1972).
J. A. Gurklis, ASTME Tech. Paper EM66-166 (1966).
H. Heitmann,Ind. Anz. 89 (1967) (23) 25.
E. N. Kanin, V. P. Batrakov, V. S. Poroikova and T. N. Smirnova,Elektrkhim. Polirovanie Met. (1974) 30.
M. Field, W. P. Koster and J. F. Kahles,Int. Conf. Manf. Technol. (1967) 1319.
H. Wiegand and H. Speckhardt,Metalloberfläche 20 (1966) 2.
S. V. Ventsel and B. V. Indin,Elektronnaya Obrabot. Mat. 3 (1975) 18.
G. Rowden,Metallurgia 77 (1968) 189.
J. R. Stephens,NASA Tech. note D304 (August 1964).
K. Sedlatschek and D. A. Thomas,Powder Met. Bull. 8 (1957) (1–2) 35.
A. Fourdeaux and A. Wronski,Brit. J. Appl. Physics 14 (1963) 218.
W. A. Ward, M. L. Jacobson and C. O. Matthews,Trans. A.S.M. 54 (1961) 84.
G. P. Zlobin and A. B. Platov,Elektronnaya Obrabot. Mat. 1 (1968) 3.
H. W. Bredin,Machinery 66 (1960) (11) 113.
R. Mondon,Met. Prog. 83 (1963) 95.
G. K. Gorobets, A. D. Kornev, N. F. Kuz'min and N. I. Ogurtsev,Fiz. i. Khim. Obrabot. Mat. 1 (1971) 38.
A. I. Isaev, G. V. Kargin and P. P. Kryuchkov,Veshnik Mashinostroenya 3 (1975) 77.
F. B. Fuller,Met. Prog. 56 (1949) 348.
H. H. Hanink,Prod. Engineering 22 (1951) 164.
G. Bellows and R. M. Niemi, SME Tech. Paper IQ71-239 (1971).
A. M. Egorov and I. A. Kostromin,Elektronnaya Obrabot. Mat. 1 (1975) 85.
L. M. Shcherbakov,Fiz. i. Khim. Obrabot. Mat. 5 (1968) 36.
B. P. Saushkin,Elektronnaya Obrabot. Mat. 5 (1973) 11.
V. P. Kiselev,ibid 4 (1971) 9.
C. L. Faust,Trans. Int. Metal Finishing 41 (1964) 1.
M. Minca,Const. Masini 26 (1974) 85.
W. Forke, and L. Franke,Technik 23 (1968) 19.
Yu. N. Petrov, I. N. Verkhovetski and G. N. Zaidman,Elektronnaya Obrabot Mat. 5 (1970) 3.
N. D. Pronichev and V. A. Shmanov,ibid 1 (1975) 19.
M. A. Laboda and J. P. Hoare,J. Electrochem. Soc. 122 (1975) 1489.
A. L. Krylov, V. G. Shuster and R. D. Eidelman,Elektronnaya Obrabot. Mat. 3 (1969) 21.
A. L. Krylov and N. I. Gavrilenko,ibid 6 (1972) 13.
J. M. FitzGerald and J. A. McGeough,J. Inst. Maths Appl. 5 (1969) 387.
J. M. FitzGerald, J. A. McGeough and L. M. Marsh,ibid 5 (1969) 409.
Yu. B. Zakharov and L. M. Shcherbakov,Fiz. i. Khim. Obrabot. Mat. 5 (1968) 59.
S. Ito, K. Chikamori and F. Sakurai,J. Mech. Lab. (Tokyo)20 (1966) (1) 1.
G. N. Korchagin, I. K. Mingazetinov and V. A. Petrov,Elektronnaya Obrabot. Mat. 4 (1972) 3.
V. A. Arantsev and Yu. N. Petrov,ibid 1 (1973) 83.
W. H. Stoll, J. Puhr-Westerheide and R. Scharwachter, IEE Pub. 133 (1975) 169.
V. A. Arantsev,Elektronnaya Obrabot. Mat. 5 (1975) 88.
G. K. Vandenburgh, ASTME, Tech. Paper MR68412 (1968).
L. A. Williams,Mod. Machine Shop 41 (1969) 129.
J. W. Throop, ASTME, Tech. Paper MR 67-709 (1967).
D. Ya. Dlugach, E. I. Slepushkin and V. M. Shchitova,Elektronnaya Obrabot. Mat. 2 (1968) 17.
H. Tipton, ‘Proc. 5th Int. Mach. Tool Design and Res. Conf’., Birmingham. Pergamon Press, Oxford (1964).
G. N. Zaidman, V. V. Parshutin and Yu. N. Petrov,Fiz. i. Khim. Obrabot. Mat. 1 (1970) 42.
H. Dietz, K. G. Gunther and K. Otto,Mech. Mat. Electr. 304/5 (1975) 22.
G. N. Korchagin, I. K. Mingazetinov, V. A. Petrov and L. A. Semakov,Elektronnaya Obrabot. Mat. 1 (1973) 9.
G. N. Korchagin and V. A. Makarov,ibid 3 (1974) 21.
J. Hopenfeld and R. R. Cole,J. Eng. Ind. 91, (1969) 755.
F. Feuillebois,Mec. Mat. Electr. 304/5 (1975) 27.
R. Ippolito,CIRP Ann. 24 (1975) 115.
J. F. Thorpe and R. D. Zerkle,Int. J. Mach. Tool Design and Res. 9 (1969) 131.
J. F. Thorpe, ASTME, Tech. Paper MR70-513 (1970).
H. Tipton,Machinery (London)112 (1968) 325.
A. G. Degtyarenko,Elektronnaya Obrabot. Mat. 6 (1968) 19.
G. A. Alekseev, Yu. S. Volkov and I. I. Moroz,Stanki i. Instrument 39 Part 6 (1968) 11.
H. Geisel,Werkstatt u. Betrieb 102 (1969) 91.
H. Heitmann and D. Pahl,Ind. Anz. 88 (1966) 1509.
K. Kawafune, T. Mikoshiba and K. Noto,CIRP Ann. 16 (1968) 345.
H. Tipton, In reference 23‘.
H. Tipton,IEE Conf. Electr. Methods of Mach. and Form. London (1967).
L. B. Dmitriev, V. V. Lyubimov, V. G. Shlyakov, V. P. Garin and V. D. Strukov,Tekhnol. Mashinostroenya, Tula21 (1971) 87.
L. N. Goldfarb,Elektronnaya Obrabot. Mat. 2 (1974) 79.
V. A. Arantsev,ibid 3 (1972) 88.
J. Molloy,Machinery (London)107 (1965) 1027.
S. C. Ratmansky, ASTME, Tech. Paper MR67-311 (1967).
Brit. Pat. 1129268.
N. Shikata and S. Ito,J. Mech. Eng. Lab. (Tokyo)28 (1974) 8.
A. M. Cherevatski, A. G. Farrakhov and V. G. Kozin,Vestnik Machinostroyenya 2 (1975) 81.
G. S. Shmakov and B. P. Yurchenko,Elektronnaya Obrabot. Mat. 1 (1971) 7.
K. Brinsmead and G. Yuraski, SME Tech, Paper CM70-812 (1970).
C. N. Larsson and E. M. Baxter,IEE Conf. Pub. 133 (Nov. 1975) 161.
Brit. Pat. 1103486.
Brit. Pat. 1353327.
Brit. Pat. 1250902.
Brit. Pats. 933731, 969957.
Brit. Pats. 998739, 1228053.
Brit. Pats. 1136024, 1309491.
Brit. Pat. 1255930.
Brit. Pat. 1318826 and V. V. Zenin, V. P. Kondratev, Vu. M. Vodyanov and F. N. Ryzhkov,Elektronnaya Obrabot. Mat. 5 (1975) 85.
Brit. Pat. 1169042.
Brit. Pat. 1141022.
Brit. Pat. 1219957.
Brit. Pat. 1238944.
Brit. Pat. 1310702.
Brit. Pat. 1321077.
Brit. Pat. 1310701.
J. W. Cuthbertson and T. S. Turner,Production Engineer 45 (1966) 270.
S. P. Loutrel and N. H. Cook, ASME Publications No. 2 (1973).
S. K. Sorkhel, P. Mishra and B. Sur,Trans. Soc. Advancement Electroch. Sci and Techn. 8 (1973) 154.
V. V. Gutikov, V. V. Klokov and V. P. Smolentsev.Fiz. i. Khim. Obrabot. Mat. 1 (1971) 31.
J. F. Thorpe and R. D. Zerkle, ‘Fundamentals of ECM’, Electrochem. Soc. (1971).
R. D. Zerkle and J. F. Thorpe, ASTME Tech. Paper MR72-537 (1972).
G. L. Baldwin, D. C. Brown and J. L. Gulati,Engineer 225 (1968) 307.
K. Schekulin,T. Z. Prak. Metallbearbeitung 60 (1966) 22.
G. Bellows, ASTME Tech. Paper MR67-710 (1967).
Anon,Iron Age Metalworking Int. 7 (1968) (2) 42.
Anon,Am. Mach. Metalworking Manuf. 111 (1967) (22) 149.
Anon,Iron Age 199 (1967) (16) 62.
H. J. Humbs,VDI (Ber.)240 (1975) 13.
J. A. Cross, ASTME Tech. Paper MR73-228 (1973).
S. C. Ratmansky,ibid MR69-135 (1969).
H. J. Billing and P. Lawrence,ibid MR73-230 (1973).
C. R. Allison,ibid MR70-554 (1970).
E. J. Krabacher,Metalworking 22 (1966) (4) 44.
A. H. Meleka in reference 23 ‘.
PERA Report 234 (May 1971) reviewed in Engineering Tech. File No. 9 (Sept. 1974).
F. A. Pitschke,S.A.E. Journal 10 (1962) 53.
M. Kronenberg,T.Z. Prak. Metallbearbeitung 59 (1965) 282.
Anon,Can. Mech. Metalworking 79 (1968) 137.
Anon,Metalworking 16 (Dec. 1960) 17.
Anon,Aircraft Production 23 (Feb. 1961) 68.
Anon,Production Equipment 39 (1962) (2) 4, 8, 36.
H. Kubeth,Werkstatt u. Betrieb. 104 (1971) 178.
D. A. Glew, SME Paper No. MR73-162 (1973).
C. Jackson and R. D. Olson,Tool Manuf. Eng. 63 (1969) (3) 44.
C. Jackson,Metal Progr. 97 (1970) (3) 106, 108, 110.
A. Uhlir,Rev. Sci. Instr. 26 (1955) 965.
Brit. Pats. 1147952, 1159092, 1159115, 1162648, 1208856, 1222943, 1240757.
Anon,Steel 160 (1967) 49.
P. M. Kelly and J. Nutting,Iron and Steel Inst. J. 192 (1959) 246.
Brit. Pat. Application No. P47905 and Brit. Pat. 1339544.
S. Gardner, D. Molloy and K. G. Payne,IEE Conf. Pub. 133 (1975) 176.
J. W. M. Van den Brekel,Metallinstuut T.N.O. 172 (Feb. 1969) 12.
L. A. Williams,Machine Moderne 57 (1963) 26.
H. Kubeth,Ind. Anz. 86 (1964) 1661.
W. B. Kleiner, ASTME, Tech. Paper SP63-40 (1963).
M. Metzger,Rev. Sci. Instr. 29 (1958) 620.
Brit. Pat. 1419992.
W. J. M. Tegart, ‘Electrolytic and chemical polishing of metals in Research and Industry’, Pergamon, New York (1959).
J. L. Jamieson and L. A. Holmes,Tool and Manuf. Eng. 51 (1963) 105.
Brit. Pats. 1147393, 1229043 and 1368422.
Brit. Pats. 1091157, 1110131, 1169234, 1200089, 1224226,
F. E. Cook, H. S. Preiser and J. F. Mills,J. Am. Soc. Naval Eng. 66 (1954) 1005.
Brit. Pats. 1172135, 1196395.
Brit. Pats. 1032293, 1032734, 1243937.
M. Kubota,Mec. Mat. Electr. 303 (1975) 15.
H. Opitz, H. Heitmann and U. Becker-Barbrock,CIRP Ann. 15 (1967) 263.
R. R. Cole,J. Eng. Ind. 83B (May 1961) 194.
E. Ya. Grodzinsky, M. V. Kozlov and A. D. Davydov,Elektronnaya Obrabot. Mat. 6 (1974) 82.
F. Huges and A. Notter,Mach. Shop. Eng. Manuf. 28 (1967) 218.
A. Geddam and C. F. Noble,IEE Conf. Pub. 133 (Nov. 1975) 249.
M. A. Manolov,Mec. Mat. Electr. 304/5 (1975) 11.
R. M. Latanison, K. C. Nielson and R. Kirschbaum,Mod. Mach. Shop. 46 (1974) (9) 69.
Brit. Pats. 1064995, 1338221, 1346174.
K. Iliev,CIRP Ann. 24 (1975) 141, and L. Kops,Proceedings, 3rd Int. North American Metalworking Research Conf. (1975).
C. F. Noble,IEE Conf. Pub. 133 (Nov. 1975) 181.
E. A. Randlett and M. P. Ellis, ASTME, Tech. Paper MR67-648 (1967).
G. K. Vandenburgh,ibid MR66-167 (1966).
L. A. Williams,ibid MR66-213 (1966).
C. L. Faust, J. A. Gurklis and J. A. Cross,Int. Conf. Manuf. Technol. (1967) 341.
E. E. Weismantel and R. H. Kuhn, ASTME, Tech. Paper MR68-206 (1968).
S. Sheff,Electrochem. Technol. 5 (1967) 47.
A. V. Margules,Zavod. Lab. 37 (1971) 471.
R. F. Pawel and T. S. Mundy,J. Electrochem. Soc. 115 (1968) 233.
D. White, C. H. Johnson and S. Leber,Prakt. Metallographie 6 (1969) 48.
Anon,Aircraft Engineering 33 (Feb. 1961) 46.
A. K. Karimov, A. A. Abrosimov and S. A. Burchakov,Elektronnaya Obrabot. Mat. 6 (1974) 84.
V. V. Parshutin, M. G. Govberg and A. I. Loskutov,ibid 5 (1974) 89.
E. M. Grala, ASTME, Tech. Paper MR67-642 (1967).
J. A. Gurklis,Cobalt 39 (1968) 81.
L. W. Collins,Machinery (US)72 (1965) 171.
J. B. Darling, ASTME, Tech. Paper MR68-208 (1968).
D. Fishlock and K. W. Hards, ‘New ways of working metals’ Newnes, London (1965) pp. 65–82.
O. I. Egorova, A. P. Ivanov, R. I. Poluden and M. A. Tolstaya,Fiz. i. Khim. Obrabot. Mat. 4 (1969) 145.
R. C. Movich, ASTME, Tech. Paper MR68-207 (1968).
Idem, ibid MR69-711 (1969).
Brit. Pat. 1211290.
J. Molloy,Machinery (London)107 (1965) 1198.
A. S. Bairamyan,Elektronnaya Obrabot. Mat. 3 (1974) 87.
J. A. Cross, ASTME, Tech. Paper MR72-536 (1972).
J. Molinelli, G. J. Michaels and G. Owens,ibid MR67-647 (1967).
J. A. Cross,ibid MR67-234 (1967).
E. Morris, SME Tech. Paper MR75-477 (1975).
V. P. Olenchich, M. A. Sokolov and V. S. Petrusenko,Stanki i Instr. 7 (1975) 39.
Brit. Pats. 1135023, 1144739, 1153015.
J. Summer,Engineer 231 (1970) 32.
B. A. Medvedev and V. P. Smolentsev,Elektronnaya Obrabot. Mat. 4 (1974) 13.
Brit. Pat. 1217410.
D. T. Vasilev and L. D. Ponomarov,Elektronnaya Obrabot. Mat. 3 (1970) 20.
V. M. Mordekhai,Stanki. i. Instrument 39 (1968) (8) 21.
Anon,Machinery (N.Y.)66 (Dec. 1959) 182.
Anon,Steel 149 (Oct. 1962) 71.
W. Grant,Technica 13 (1964) 1116.
Anon,Am. Machinist/Metalworking Manuf. 112 (1968) (13) 110.
Brit. Pat. 1226033.
B. N. Berezkhov, V. A. Golovachev, V. A. Shmanov and Yu. A. Sirazh,Elektronnaya Obrabot Mat. 3 (1969) 34.
Brit. Pats. 943101, 1315059.
F. V. Sedykin and L. B. Dmitriev,Techn. Machinostroyenia, Tula22 (1972) 24.
L. A. Williams,Mach. Moderne 709 (April 1968) 67.
Brit. Pats. 1109720, 1143932, 1180159, 1251182, 1254587, 1280496.
Brit. Pats. 939402, 1353562 and E. S. Stepanov,Elektronnaya Obrabot. Mat. 6 (1968) 14.
Anon,Iron Age 193 (1964) (7) 90.
V. Buickaens and I. Paganini,Rev. Sci. Instr. 42 (1971) 1687.
Brit. Pats. 1028247, 1065485, 1066197.
A. P. Zakonov and G. N. Korchagin,Elektronnaya Obrabot. Mat. 6 (1973) 30.
Brti. Pats. 991454, 1046471, 1195669.
L. A. Williams, SME Paper SP63-44 (1963).
R. A. Wilson,Iron Age 214 (1974) (25) 45.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bannard, J. Electrochemical machining. J Appl Electrochem 7, 1–29 (1977). https://doi.org/10.1007/BF00615526
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00615526