Abstract
The anodic behaviour of chalcopyrite in 1 M H2SO4 and 1 M HCl was studied by linear sweep voltammetry and potentiostatic electrolysis. Voltammograms with a fresh surface showed a small prewave, attributed to a surface oxidation process, followed by a region of active dissolution characterized by a steeply rising anodic current. At still higher potentials the behaviour differed in the two electrolytes, but, contrary to a previous report, there was no evidence of a photosensitive limiting current. Anodic characteristics of chalcopyrite specimens from different sources, including synthetic material, were similar. The anode reaction was found to involve 6·7±0·3 F per mole of chalcopyrite, from which it was calculated that 86% of the sulphide sulphur was oxidized to the elemental form (some of which was plastic sulphur) and 14% to sulphate. The surfaces of oxidized electrodes were examined and photographed after varying periods of potentiostatic electrolysis. Chalcopyrite dissolution occurred at localized sites, the number of which depended strongly on potential. Current-voltage and potentiostatic current-time curves were interpreted in terms of the kinetics of nucleation, growth and overlap of these discrete corrosion centres.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
K. N. Subramanian and P. H. Jennings,Canad. Metall. Quart. 11 (1972) 387.
G. Springer,Inst. Mining Met. Trans. Sect. C 79 (1970) 11.
E. N. Zevgolis, Ph.D. Thesis, University of Minnesota (1971).
E. N. Zevgolis and S. R. B. Cooke,Proceedings Eleventh International Mineral Processing Congress, Cagliari, Universita di Cagliari (1975) p. 449.
R. Bertram and H. Illi,Chem.-Ing.-Tech. 48 (1976) 141.
D. L. Jones and E. Peters, ‘High Temperature High Pressure Electrochemistry in Aqueous Solutions”, NACE4, National Association of Corrosion Engineers, Houston (1976) p. 443.
T. Biegler, D. A. J. Rand and R. Woods,J. Electroanalyt. Chem. 60 (1975) 151.
T. Biegler and D. A. Swift,J. Appl. Electrochem. 6 (1976) 229.
H. G. Linge,Hydrometallurgy 2 (1976) 51.
J. P. Baur, H. L. Gibbs and M. E. Wadsworth, ‘Initial stage sulfuric acid leaching kinetics of chalcopyrite using radiochemical techniques”, Paper 72-B-96at Annual AME Meeting, San Francisco (1972).
M. Fleischmann and H. R. Thirsk, ‘Advances in Electrochemistry and Electrochemical Engineering” (Ed. P. Delahay), Vol. 3, Interscience, New York (1963) Ch. 3.
T. Biegler,J. Electroanalyt. Chem. 85 (1977) 101.
H. H. Uhlig, ‘Corrosion and corrosion control” (2nd ed.), John Wiley, New York (1971) Ch. 5.
J. E. Dutrizac and R. J. C. MacDonald,Minerals Sci. Eng. 6 (1974) 59.
R. T. Shuey, ‘Semiconducting ore minerals”, Elsevier, Amsterdam (1975).
T. Biegler,J. Electroanalyt. Chem. 70 (1976) 265.
R. J. Roman and B. R. Benner,Minerals Sci. Eng. 5 (1973) 3.
J. E. Dutrizac and R. J. C. MacDonald,Met. Trans. 2 (1971) 2310.
H. G. Linge,Hydrometallurgy 2 (1976/1977) 219.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Biegler, T., Swift, D.A. Anodic electrochemistry of chalcopyrite. J Appl Electrochem 9, 545–554 (1979). https://doi.org/10.1007/BF00610940
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00610940