Abstract
In this study attempts are made to develop a basic understanding of the interfacial interactions resulting from the combination of aramid fibres with epoxy matrices in composite materials. The interfacial interactions examined are mechanical stresses due to fibre-matrix thermal strains and Poisson's ratio mismatch, covalent chemical bonding, fibre-matrix wetting, and effects of physicochemical weak boundary layers. Both aramid and carbon fibres have been examined to assess the interfacial interactions by comparing the behaviour of these two fibres in the same matrices. The results indicate that the adhesion of aramid fibres to epoxy matrices lack both the mechanical and the chemical interactions present at the carbon-epoxy interface. Aramid fibres exhibit an interfacial shear strength much lower than the expected theoretical value. Direct observation of the aramid-epoxy interface by transmission electron microscopy shows fibrillar separations within the fibre surface, which may be the limiting factor in achieving greater interfacial adhesion.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
V. F. Zackay, “High-Strength Materials” (John Wiley and Sons, New York, 1964) p. 578.
J. M. Whitney andL. T. Drzal, Astm STP 937 (American Society for Testing and Materials, Philadelphia, 1987) p. 179.
L. T. Drzal, M. J. Rich, J. D. Camping andW. J. Park, in Proceedings of the 35th Annual Technical Conference, Reinforced Plastics/Composites Institute, New Orleans, Louisiana 1980 (The Society of the Plastics Industry Inc., 1980) paper 20-C.
S. Rojstaczer, D. Cohn andG. Marom,J. Mater. Sci. Lett. 4 (1985) 1233.
L. S. Penn, F. A. Bystry, W. Karp andS. M. Lee,Polym. Sci. Technol. 27 (1985) 93.
L. T. Drzal, in Proceedings of the 15th National SAMPE Technical Conference, Cincinnati, Ohio, October 1983 (SAMPE, Covina California, 1983) p. 190.
A. Garton andJ. H. Daly,Polym. Compos. 6 (1985) 195.
L. T. Drzal,J. Adhesion 16 (1983) 1.
T. F. Cooke,J. Polym. Eng. 7 (1987) 197.
S. K. Li, R. P. Smith andA. W. Neumann,J. Adhesion 17 (1984) 105.
S. P. Wesson andR. E. Allred, in Proceedings of the 7th Annual Meeting of the Adhesion Society, Jacksonville, Florida, 1984 (Adhesion Society, Akron, Ohio, 1984) p. 27.
S. J. Deteresa, R. J. Porter andR. J. Farris,J. Mater. Sci. 20 (1985) 1645.
H. Saghizadeh andC. K. H. Dharan,J. Eng. Mater. Technol. 108 (1986) 290.
A. R. Bunsell,J. Mater. Sci. 14 (1975) 1300.
M. G. Dobb, D. J. Johnson andB. P. Saville,J. Polym. Sci. Part B 15 (1977) 2201.
R. J. Morgan, C. O. Pruneda andW. J. Steele,ibid 21 (1983) 1757.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kalantar, J., Drzal, L.T. The bonding mechanism of aramid fibres to epoxy matrices. J Mater Sci 25, 4194–4202 (1990). https://doi.org/10.1007/BF00581072
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00581072