Abstract
In this paper are described the main characteristics of the plasma spraying process of alumina deposits, i.e., the temperature and flow field of the plasma jets obtained with the classical spraying torches, the injection of the particles into the plasma jet, the particle surface temperature and velocities in the plasma (measured for calibrated alumina particles), and the coating generation. The measurements on the alumina particles are compared with the predictions of a mathematical model. The experimental and computed particle velocities are in rather good agreement. However, this is not the case for the particle surface temperature. Possible reasons for the discrepancy are proposed (influence of the carrier gas, thermophoretic forces, and poor penetration of the particles into the plasma core even for an injection velocity twice that of the optimal calculated one, as shown by recent measurements). Finally the correlations between the particle velocities and surface temperature, and the properties of the alumina coating (porosity, crystal structure, mechanical properties) are studied.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. H. Zaat,Proceedings of the 9th International Thermal Spraying Conference, La Haye, May 23–29, 1980.
N. N. Rykalin and V. V. Kudinov,Pure Appl. Chem. 48, 229 (1976).
J. L. Besson, M. Vardelle, and P. Boch,Ind. Ceram. 727, 248 (1979).
A. Vardelle, P. Fauchais, and M. Vardelle, Projection de revêtements protecteurs par plasma, Actual.Chim. 10, 69 (1981).
R. M. Gage, Arc torches and process, U.S. Patent No. 2, 806, 124 (1957).
E. Pfender, Electric arcs and gas heaters, inGasesous Electronics, Vol. 1, M. N. Hirsch and H. J. Oskam, eds., Academic Press, New York (1978), p. 291.
F. Kassabji and P. Fauchais,Rev. Phys. Appl. 16, 549 (1981).
M. Vardelle, Etude de la structure des dépôts d'alumine obtenus par projection plasma en fonction des températures et des vitesses des particules au moment de leur impact sur la cible, Thèse de 3ème cycle, Université de Limoges, March 26 (1980).
A. Vardelle, J. M. Baronnet, M. Vardelle, and P. Fauchais,IEEE Trans. Plasma Sci. 8, 417 (1980).
J. M. Baronnet, Contribution à l'étude spectroscopique des plasmas d'azote produits par un générateur à arc soufflé; application à la chimie des plasmas: synthèse des oxydes d'azote, Thèse d'Etat, Université de Limoges, November (1978).
E. Bourdin, P. Fauchais, and M. Boulos, Transient heat conduction under plasma conditions,Int. J. Heat Mass Transf. (1982), accepted for publication.
M. Vardelle, A. Vardelle, J. L. Besson, and P. Fauchais,Rev. Phys. Appl. 16, 425 (1981).
C. Gorse, Contribution au calcul des propriétés de transport des plasmas des mélanges argon-hydrogène et argon-azote, Thèse de 3ème cycle, Université de Limoges, September 9 (1975).
E. Bourdin, Contribution à l'étude théorique et expérimentale des nitrures et d'oxynitrures par réactions de jets de plasma d'azote avec des poudres d'aluminium et de silicium et leurs oxydes, Thèse de 3ème cycle, Université de Limoges, March 16 (1976).
M. Boulos,IEEE Trans. Plasma Sci. PS-6, 93 (1978).
T. Yoshida and K. Akashi,J. Appl. Phys. 48, 2252 (1977).
W. D. Murray and F. Landis,Heat Transf. 81, 106 (1959).
P. Jamet and R. Bonnerot,Int. J. Numer. Methods Eng. 8, 811 (1974).
M. Vardelle, A. Vardelle, P. Fauchais, and M. I. Boulos, Plasma-particle momentum and heat transfer: modelling and measurements,AIChE J. (1982), accepted for publication.
Y. C. Lee, K. C. Hsu, and E. Pfender, Modelling of particles injected into a D.C. plasma jet, inProceedings of the 5th International Symposium on Plasma Chemistry, Heriot Watt University, Edinburgh, August 10–14, 1981, p.795.
J. J. Houben, Remarks concerning a rational plasma for thermal spraying,Proceedings of the 9th International Thermal Spraying Conference, La Haye, May 19–23, 1980, p. 143.
J. Madejski,Int. J. Heat Mass Transf. 19, 1003 (1976).
J. Madejski,Bull. Acad. Pol. Sci. 24, No. 1 (1976).
P. Fauchais, E. Bourdin, J. F. Coudert, and R. McPherson, High pressure plasmas and their application to ceramic technology, inPlasma Chemistry, Vol. 3, M. Venugopalan and S. Veprek, eds., Springer-Verlag, Berlin (1982), to be published.
H. Jones,Rep. Prog. Phys. 36, 1425 (1973).
P. Zoltowski,Rev. Int. Htes Temp. Refract. 6, 65 (1968).
R. McPherson,J. Mater. Sci. 8, 851 (1973).
T. W. Sokolova, I. R. Kozlova, Kh. Derko, and A. V. Kiiko,Izv. Akad. Nauk SSSR Neorg. Mater. 9, 611 (1973).
F. Eichorn, J. Metzler, and W. Eysel,Metallorberflaeche 26, 212 (1972).
J. B. Kaffachine and A. G. Thomas,Powder Met. 7, 290 (1964).
V. S. Thompson and O. J. Whittemdre,Ceram. Bull. 47, 637 (1968).
H. S. Ingham and A. D. Shepard,Mecto Flame Spraying Handbook (1965).
B. S. Mitin and Yu. A. Nagibin,Izv. Akad. Nauk SSSR, Neorg. Mater. 7, 814 (1971).
S. K. Kitahara and A. Hasni,J. Vac. Sci. Technol. 4, 142 (1974).
J. Guyonnet, Brevet C.N.R.S. 124111 et additifs 168044 et 7044678.
R. McPherson,J. Mater. Sci. 15, 3141 (1980).
J. F. Coudert, J. M. Baronnet, A. Catherinot, and P. Fauchais, Time-resolved measurements of rotational temperature in a N2/O2 D.C. plasma jet,Seventh International Conference on Gas Discharges and Their Applications. London, August 31 to September 3, 1982.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Vardelle, A., Vardelle, M. & Fauchais, P. Influence of velocity and surface temperature of alumina particles on the properties of plasma sprayed coatings. Plasma Chem Plasma Process 2, 255–291 (1982). https://doi.org/10.1007/BF00566524
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF00566524