Abstract
The effect of plasma etching and chromic acid treatment on the surface adhesion of ultra-high modulus polyethylene fibres to an epoxy resin has been studied. The adhesion was determined from pull-out tests, and showed a significant improvement for both plasma and acid treatments. The mechanism of failure, however, appeared to be different in the two cases. Untreated and acid-treated monofilaments showed a fairly smooth surface and failure of the pull-out samples involved sliding along the monofilament/resin interface. Plasma treatment, on the other hand, produced a remarkable structure on the monofilament surface, into which resin penetrated to produce a mechanical keying between monofilament and resin. Failure in the pull-out test then involved rupture within the monofilament.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
C. C. Chamis, “Composite Materials”, edited by L. J. Broutman and R. H. Krock, Vol. 6 “Mechanics of Load Transfer at the Interface”, edited by E. P. Plueddemann (Academic Press, New York, 1974) ch. 2.
V. Ye Basin,Polymer Sci. USSR 20 (1979) 2961.
A. J. Kinloch,J. Mater. Sci. 15 (1980) 2141.
E. P. Plueddemann, 25th Annual Technical Conference, Reinforced Plastics/Composites Division, Washington DC, February 1970 (The Society of the Plastics Industry Inc., New York, 1970) Section 13D p. 1.
D. M. Brewis, private communication (1979).
D. Briggs, D. M. Brewis andM. B. Konieczo,J. Mater. Sci. 11 (1976) 1270.
D. Briggs, D. M. Brewis, J. Comyn, R. J. Dahm, M. A. Green andM. B. Konieczko,Surf. Interface Anal. 2 (3) (1980) 107.
J. R. Huntsberger,Adhesives Age 23 (1978).
Idem, “Treatise on Adhesion and Adhesives”, Vol. 1, edited by R. L. Patrick (Marcel Dekker-Inc., New York, 1967) ch. 4.
G. Capaccio andI. M. Ward,Nature Phys. Sci. 243 (1973) 143.
D. M. Brewis andD. Briggs,Polymer 22 (1981) 7.
S. Yamakawa andF. Yamamoto,J. Appl. Polymer Sci. 25 (1980) 41.
C. E. M. Morris,ibid. 14 (1970) 2171.
A. R. Blythe, D. Briggs, C. R. Kendall.D. G. Range andV. J. I. Zichy,Polymer 19 (1978) 1273.
J. Amouroux, M. Goldman andM. Tran,Commun.-Table Ronde Int. Trait. Surf. Polym. Plasma (1977) RT8.
J. Amouroux, M. Tran andM. Goldman,Conf. Proc. Int. Symp. Plasma Chem. Ser. 2 (1979) 759.
J. F. Carley andP. T. Kitze,Soc. Plast. Eng. Tech. Pap. Ser. 25 (1979) 728.
V. V. Polezhaev, I. Z. Onatil, M. D. Podvolotskaya andN. A. Savinova,Plast. Massy 5 (1977) 30.
H. Schonhorn andR. H. Hansen,J. Appl. Polymer Sci. 11 (1967) 1461.
L. J. Broutman, 25th Annual Technical Conference, Reinforced Plastics/Composites Division, Washington DC, February 1970 (The Society of the Plastics Industry Inc., New York, 1970) Section 13B p.1.
G. Capaccio andI. M. Ward,Polymer 18 (1977) 967.
Idem, J. Polymer Sci. Polymer Phys. Ed. 19 (1981) 667.
J. J. Bikerman,Adhesives Age 2 (1959) 23.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ladizesky, N.H., Ward, I.M. A study of the adhesion of drawn polyethylene fibre/polymeric resin systems. J Mater Sci 18, 533–544 (1983). https://doi.org/10.1007/BF00560643
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00560643