Abstract
The solidification behaviour of a fibre reinforced Al-6 wt% Cu alloy, containing 30 vol% of 3 μm diameter, semi-continuous, aligned alumina fibres has been studied. Results are presented to show the influence of fibres on the microstructural development of and microsegregation in the matrix during freezing. The effect of total solidification time, θt, on solidification behaviour was examined for 1<θt<520 S. By using interrupted solidification experiments microstructural development was studied in detail. It was found that α-Al begins to grow within interfibre regions, and grows towards the Al2O3 fibres, avoiding them where possible. Consequently fibres are located in the last regions to solidify. When θt>10 s the final microstructure is non-dendritic, and CuAl2 is located predominantly at the fibre-matrix interface. When θt ≃ 1 s it was observed that the final microstructure is dendritic with a periodic segregation pattern, and the CuAl2 is more dispersed. The matrix composition becomes more uniform, and the minimum matrix composition rises as θt increases. The growth and microsegregation are analysed and discussed using simple semi-analytical models. The implications are that fibres significantly influence solidification behaviour if λf/λs<1, where λf is the average interfibre spacing and λs the secondary dendrite arm spacing which would develop in the unreinforced alloy.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
W. Kurz andD. J. Fisher, “Fundamentals of Solidification” (Trans Tech, Aedermansdorf, 1986) pp. 65–96.
R. Trivedi andK. Somboonsuk,Mater. Sci. Engng 65 (1984) 65.
M. C. Flemings, “Solidification Processing” (McGraw- Hill, New York, 1974) p. 150.
K. P. Young andD. H. Kirkwood,Met. Trans. A6 (1975) 197.
W. Kurz andD. J. Fisher,Acta Metall. 29 (1981) 11.
J. D. Hunt, in Proceedings Conference on Solidification and Casting of Metals, Sheffield, July 1977 (Metals Society, London, 1979) p. 3.
M. Rappaz andPH. Thévoz,Acta Metall. 35 (1987) 1487.
Idem., ibid.,35 (1987) 2929.
D. H. Kirkwood,Mat. Sci. Engng 65 (1984) 101.
T. F. Bower, H. D. Brody andM. C. Flemings,Trans. AIME 236 (1966) 624.
M. H. Burden andJ. D. Hunt,J. Cryst. Growth 22 (1974) 99.
P. N. Quested andM. McLean,Mater. Sci. Engng 65 (1984) 171.
T. W. Clyne andJ. F. Mason,Met. Trans. 18A (1987) 1519.
C. R. Cook, D. I. Yun, andW. H. Hunt Jr., in “Cast Reinforced Metal Composites” (American Society of Metals, Metals Park, Ohio, 1988) p. 195.
J. A. Cornie, A. Mortensen, M. N. Gungor andM. C. Flemings, in Proceedings of the 5th International Conference on Composite Materials, edited by W. C. Harrigan, J. Strife and A. K. Dhingra (TMS, Warrendale, 1986) 809.
A. Mortensen, M. N. Gungor, J. A. Cornie andM. C. Flemings,J. Met. 38 (1986) 30.
J. A. Cornie, A. Mortensen andM. C. Flemings, in Proceedings of the 6th International Conference on Composite Materials, edited by F. L. Matthews, N. C. R. Buskell, J. M. Hodginson, and J. Morton (Elsevier Applied Science, London, 1987) p. 2.297.
A. Mortensen, J. A. Cornie andM. C. Flemings,Met. Trans. 19A (1988) 133.
J. A. Sekhar andR. Trivedi,Mater. Sci. Engng A114 (1989) 133.
G. R. Cappelman, J. F. Watts andT. W. Clyne,J. Mater. Sci. 20 (1985) 2159.
Data Sheet on Safimax (ICI Chemical and Polymers Group, Runcorn, UK, 1987).
R. T. De Hoff andF. N. Rhines, “Quantitative Microscopy” (McGraw-Hill, New York, 1968) p. 283.
M. Gündüz andJ. D. Hunt,Acta Metall. 33 (1985) 1651.
J. D. Hunt andD. G. McCartney,ibid. 35 (1987) 89.
T. W. Clyne andW. Kurz,Met. Trans. 12A (1981) 965.
H. D. Brody andM. C. Flemings,Trans. AIME 236 (1966) 615.
M. N. Gungor, PhD Thesis, Massachusetts Institute of Technology (1986).
R. Trumper andV. Scott, in Proceedings of the 3rd European Conference on Composite Materials, edited by A. R. Bunsell, P. Lamicq and A. Masiah (Elsevier Applied Science, London, 1989) p. 139.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Li, Q.F., McCartney, D.G. & Walker, A.M. Development of solidification microstructures in a fibre reinforced alloy. J Mater Sci 26, 3565–3574 (1991). https://doi.org/10.1007/BF00557145
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00557145