Abstract
The shape of austenite grains in low-alloy steel submerged-arc weld deposits has been examined; it is found that the grain morphology can be approximated as a honeycomb of hexagonal prisms with their “c” axes aligned along the major heat-flow direction. Methods of determining the grain size from simple stereological measurements are also discussed. An increase in the oxygen content has not been found to reduce the austenite grain size of as-deposited welds.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
G. J. Davies andJ. G. Garland,Int. Metall. Rev. 20 (1975) 83.
W. F. Savage, C. D. Lundin andA. H. Aaronson,Weld J. 44 (1965) 175.
W. F. Savage andA. H. Aaronson,ibid. 45 (1966) 85.
F. A. Calvo, K. P. Bently andR. G. Baker, “Studies of the Welding Metallurgy of Steels” (BWRA, Abington, Cambridge, 1963) p. 71.
D. J. Widgery andG. G. Saunders,Weld. Inst. Res. Bull. 16 (1975) 277.
T. Edvardson, H. Fredriksson andI. Svensson,Met. Sci. 10 (1976) 298.
H. Fredriksson andJ. Stejerndahl,ibid. 16 (1982) 575.
H. Fredriksson, Acta Universitats Ouluensis, Series C,26-4, Proceedings of the 3rd Scandinasm Symposium on Materials Science, 1983 (Oulu University Press, Finland, 1983) p. 1.
H. K. D. H. Bhadeshia, L.-E. Svensson andB. Gretoft,Acta Metall. 33 (1985) 1271.
D. P. Woodruff, in “The Solid-Liquid Interface” (Cambridge University Press, Cambridge, 1973) p. 84.
P. L. Harrison andR. A. Farrar,J. Mater. Sci. 16 (1981) 2218.
M. Ferrante andR. A. Farrar,ibid. 17 (1982) 3293.
R. C. Cochrane andP. R. Kirkwood, in “Trends in Steels and Consumables for Welding”, Proceedings of the Welding Institute Conference, London (1978) p. 103.
G. S. Barrite, R. A. Ricks andP. R. Howell, in “Quantitative Microanalysis with High Spatial Resolution”, (Metals Society, London, 1981) p. 112.
D. J. Widgery, Welding Institute Research Members Seminar on the Toughness of Weld Metals, Newcastle-upon-Tyne (1977).
F. Matsuda,Trans. Nat. Res. Inst. Met. (Jpn.) 11 (1969) 43.
M. Kato,Trans. Jpn. Weld Soc. 3 (1972) 69.
E. E. Underwood, “Quantitative Stereology” (Addison-Wesley, Reading Massachusetts, 1970) p. 92.
R. T. Dehoff, “Quantitative Microscopy”, edited by R. T. DeHoff and F. N. Rhines, (McGraw-Hill, New York, 1968) p. 12.
E. E. Underwood, in “Quantitative Microscopy”, edited by R. T. DeHoff and F. N. Rhines (McGraw-Hill, New York, 1968) p. 78.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bhadeshia, H.K.D.H., Svensson, L.E. & Gretoft, B. The austenite grain structure of low-alloy steel weld deposits. J Mater Sci 21, 3947–3951 (1986). https://doi.org/10.1007/BF00553451
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00553451