Abstract
The influence of a laser melting on both mechanical and electrochemical properties was studied in two carbon steels. Geometry and microstructure of the melt zone were first observed by optical and scanning electron microscopy, in various experimental conditions: with different interaction times and power density, for simple and multiple track melting. A large hardening was induced by the severe quenching resulting from rapid solidification; therefore the presence of hard points on the surface of the material may increase lifetime of specimens and improve tribological properties. This hardening created by the laser melting did not produce deleterious modifications of surface roughness or corrosion behaviour, at least in mildly corrosive saline solutions.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
N. Wade, T. Koshihama and Y. Hosoi, Scripta Metall. 19 (1985) 859.
P. A. Molian and W. E. Wood, J. Mater. Sci. 18 (1983) 2555.
P. R. Strutt, H. Novotny, M. Tuli and B. H. Kear. Mater. Sci. Engng 36 (1978) 217.
P. R. Strutt, ibid. 44 (1980) 239.
G. Barton, M. Diefenbach and J. Betz, Proceedings of the Conference on “Rapidly Quenched Metals”, edited by S. Steeb and H. Warlimont (Elsevier Science, Amsterdam, 1985) p. 855.
M. Carbucicchio, G. Meazza, G. Palombarini and G. Sabogna, J. Mater. Sci. 18 (1983) 1543.
M. F. Ashby and K. E. Easterling, Acta Metall. 32 (1984) 1935.
Idem, ibid. 34 (1986) 1533.
M. Carbucicchio and G. Palombarini, J. Mater. Sci. 21 (1986) 75.
P. Canova and E. Ramous, ibid. 21 (1986) 2143.
T. R. Anthony and H. E. Cline, J. Appl. Phys. 49 (1978) 1248.
E. McCafferty, P. G. Moore and G. T. Peace, J. Electrochem. Soc. 129 (1982) 9.
T. R. Anthony and H. E. Cline, J. Appl. Phys. 48 (1977) 3888.
S. M. Copley, D. Beck, O. Esquivel and M. Bass, in “Laser-Solid Interactions and Laser Processings”, edited by S. D. Ferris, H. J. Leamy and J. M. Poate, American Institute Conference Proceedings, New York, 50 (1979) p. 161.
H. S. Carslaw and J. C. Jaeger, in “Conduction of Heat in Solids”, (Clarendon, Oxford, 1959).
R. Peter, W. Löschau, W. Pompe and W. Forker, Werkstoffe und Korrosion 37 (1986) 621.
R. Peter, K. E. Eichhorn and W. Forker, Z. Phys. Chem. Leipzig 256 (1987) 1169.
H. H. Uhlig, “Corrosion and Corrosion Control”, 2nd Edn (Wiley, New York, 1985).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Pelletier, J.M., Pergue, D., Fouquet, F. et al. Laser surface melting of low and medium carbon steels: influence on mechanical and electrochemical properties. J Mater Sci 24, 4343–4349 (1989). https://doi.org/10.1007/BF00544509
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00544509