Abstract
The effect of two factors having the most important influence on spin coating process of sol-gel films: the spin speed and the temperature (of the substrate and the applied solution) during film deposition is discussed. It is shown, that film thickness and thickness uniformity are determined by centrifugal driving force dynamics, viscous polymer rheology, solvent evaporation dynamics, and film porous microstructure.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
C.J. Brinker and G.W. Scherer, Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing (Academic Press, San Diego, CA, 1990).
Sol-Gel Technology for Thin Films, Fibers, Preforms, Electronics, and Speciality Shapes, edited by L.C. Klein (Noyes, Park Ridge, N.J., 1988).
L.D. Molnar, Semiconductor International 12, 92 (1989).
J.F. Scott, C.A. Paz De Araujo, and L.D. McMillan, Condensed Matter News 1, 16 (1992).
A.S. Sigov, K.A. Vorotilov, A.S. Valeev, and M.I. Yanovskaya, Journal of Sol-Gel Science and Technology 2, 563 (1994).
Precision Cleaning and Meniscus Coating System, Specialty Coating Systems, Inc.
L.D. McMillan, C.A. Paz de Araujo, T. Roberts, J. Cuchiaro, M.C. Scott, and J.F. Scott, Integrated Ferroelectrics 2, 351 (1992).
C.J. Brinker, A.J. Hurd, G.C. Frye, K.J. Ward, and C.S. Ashley, Journal of Non-Cryst. Solids 121, 294 (1990).
I. Strawbridge and P.F. James, Journal of Non-Cryst. Solids 86, 381 (1986).
D.E. Bornside, C.W. Macosko, and L.E. Scriven, Journal of Imagine Technology 13, 122 (1987).
A.G. Emslie, F.T. Bonner, and L.G. Peck, Journal of Applied Physics 29, 858 (1958).
A. Acrivos, M.J. Shah, and E.E. Petersen, Journal of Applied Physics 31, 963 (1960).
D. Meyerhofer, Journal of Applied Physics 49, 3993 (1978).
W.W. Flack, D.S. Soong, A.T. Bell, and D.W. Hess, Journal of Applied Physics 56, 1199 (1984).
S.A. Jenekhe and S.B. Schuldt, Ind. Eng. Chem. Fundam. 23, 432 (1984); S.A. Jenekhe, Ind. Eng. Chem. Fundam. 23, 425 (1984).
C.J. Lawrence, Phys. Fluids 31, 2786 (1988).
D.E. Bornside, C.W. Macosko, and L.E. Scriven, Journal of Applied Physics 66, 5185 (1989).
S. Shimoji, Journal of Applied Physics 66, 2712 (1989).
P.C. Sukanek, Journal of Electrochemical Society 138, 1712 (1991).
D.E. Bornside, C.W. Macosko, and L.E. Scriven, Journal of Electrochemical Society 138, 317 (1991).
D.E. Bornside, R.A. Brown, P.W. Ackmann, J.R. Frank, A.A. Tryba, and F.T. Geyling, Journal of Applied Physics 73, 585 (1993).
L.E. Stillwagon, R.G. Larson, and G.N. Taylor J. Electrochem. Soc. 134, 2030 (1987).
P.C. Sukanek, J. Electrochem. Soc. 136, 3019 (1989).
D.E. Bornside, J. Electrochem. Soc. 137, 2589 (1990).
C.J. Brinker, A.J. Hurd, G.C. Frye, K.J. Ward, and C.S. Ashley, J. Non-Cryst. Solids 121, 294 (1990).
K.A. Vorotilov, V.A. Vasiljev, M.V. Sobolevsky, V.I. Petrovsky, and N.I. Afanasjeva, Thin Solid Films, submitted for publication.
D.J. Taylor and B.D. Fabes, J. Non-Cryst. Solids 147 & 148, 457 (1992).
V.K. Grigor'ev, V.I. Petrovsky, and I.A. Shapova, Izmeritelnaya Technika 1, 15 (1991) (in Russian).
S. Wu, J. Electrochem. Soc. 130, 199 (1983).
R.C. Reid, J.M. Pransnitz, and T.K. Sherwood, The Properties of Gases and Liquids (McGraw-Hill, NY, 1977; in Russian translation: Leningrad, 1982).
K.A. Vorotilov, E.V. Orlova, and V.I. Petrovsky, Thin Solid Films 209, 188 (1992).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Vorotilov, K., Petrovsky, V. & Vasiljev, V. Spin coating process of sol-gel silicate films deposition: Effect of spin speed and processing temperature. J Sol-Gel Sci Technol 5, 173–183 (1995). https://doi.org/10.1007/BF00487014
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00487014