Abstract
The samples were dissolved in nitric acid. The excess acid, which influences the lead absorption signal, was removed by the addition of formic acid. Both the heights and the areas of the absorption peaks were evaluated and the results compared. The precision and the accuracy of the method, which was tested by determining the lead content of a biological standard reference material, proved to be satisfactory.
Zusammenfassung
Für die Bleianalyse in biologischen Materialien mit Hilfe der flammenlosen Atomabsorption wurde eine Methode entwickelt. Die Proben wurden mit Salpetersäure gelöst. Die überschüssige Säure, durch die das Blei-Absorptionssignal beeinflußt wird, wurde durch Zugabe von Ameisensäure entfernt. Es wurden sowohl die Höhen als auch die Flächen der Absorptionspeaks ausgewertet und die Ergebnisse miteinander verglichen. Bei der Bestimmung des Bleigehalts eines biologischen Standardmaterials konnte gezeigt werden, daß die Methode ausreichende Reproduzierbarkeit und Genauigkeit besitzt.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Literatur
Ballo, M.: Ber. Deutsch. Chem. Ges. 17, 6 (1884)
Kotz, L., Kaiser, G., Tschöpel, P., Tölg, G.: diese Z. 260, 207 (1972)
Krause, C.: In Vorbereitung
LaFleur, P. D.: J. Radioanal. Chem. 19, 227 (1974)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Behne, D., Brätter, P. & Wolters, W. Bestimmung von Blei in biologischen Materialien mit Hilfe der flammenlosen Atomabsorptionsspektrometrie. Z. Anal. Chem. 277, 355–358 (1975). https://doi.org/10.1007/BF00423780
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00423780