Abstract
The steady-state morphology of an immiscible polymer blend in shear flow has been investigated by optical microscopy techniques. The blend is composed by poly-isobutylene (PIB) and poly-dimethylsiloxane (PDMS) of comparable viscosity. Experiments were performed by means of a home-made transparent parallel plate device. The two plates can be independently counterrotated, so that sheared droplets of the dispersed phase can be kept fixed with respect to the microscope point of view, and observed for long times. The distribution of drops and their average size were measured directly during flow at different shear rates and for different blend compositions. It was found that the average drop size in steady-state conditions is a decreasing function of the applied shear rate, and does not depend on blend composition for volume fractions up to 10%. Experiments have proved that, in the shear rate range which could be investigated, the stationary morphology is controlled only by coalescence phenomena, droplet breakup playing no role in determining the size of the dispersed phase. More generally, it has been shown that the steady-state morphology is a function not only of the physical parameters of the blend and of the shear rate, but also of the initial conditions applied to the blend. The steady-state results reported in this paper constitute the first direct experimental confirmation of theoretical models which describe the mechanisms of shear-induced drop coalescence.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Acrivos A, Lo TS (1978) Deformation and breakup of a single slender drop in an extensional flow. J Fluid Mech 86:641–672
Chaffey CE, Brenner H, Mason SG (1965) Particle motions in sheared suspensions. XVII: Deformation and migration of liquid drops. Rheol Acta 4:56–63
Chin HB, Han CD (1980) Studies on droplet deformation and breakup. II. Breakup of a droplet in nonuniform shear flow. J Rheol 24:1–37
Cogswell FN, Griffin BP, Rose JB (1983) US Patent 4386174
Collyer AA (1996) The morphology and theology of liquid crystal polymer blends. In: Acierno A, Collyer AA (eds) Rheology and processing of liquid crystal polymers. Chapman and Hall, London, pp 185–217
Elmendorp JJ, Van der Vegt AK (1986) A study on polymer blend microrheology: part IV. The influence of coalescence on blend morphology origination. Polym Eng Sci 26:1332–1338
Elmendorp JJ (1991) Dispersive mixing in liquid systems. In: Rauwendaal C (ed) Mixing in polymer processing. Marcel Dekker, New York, pp 17–100
Favis BD, Chalifoux JP (1987) The effect of viscosity ratio on the morphology of propylene/polycarbonate blends during processing. Polym Eng Sci 27:1591–1600
Gauthier F, Goldsmith HL, Mason SG (1971) Particle motions in non-Newtonian media. I: Couette flow. Rheol Acta 10:344–364
Grace HP (1982) Dispersion phenomena in high viscosity immiscible fluid systems and applications of static mixers as dispersion devices. Chem Eng Commun 14:225–277
Graebling D, Muller R, Palierne JF (1993) Linear viscoelastic behavior of some incompatible polymer blends in the melt. Interpretation of data with a model of emulsion of viscoelastic liquids. Macromolecules 26:320–329
Guido S, private communication
Janssen JMH (1993) Dynamics of liquid-liquid mixing. PhD Thesis, University of Technology, Eindhoven, The Netherlands
Karam HJ, Bellinger JC (1968) Deformation and breakup of liquid droplets in a simple shear field. I&C Fund 7:576–581
Krause S (1978) Polymer-polymer compatibility. In: Paul DR, Newman S (eds) Polymer blends. Academic Press, New York, pp 16–113
Levitt L, Macosko CW, Pearson SD (1996) Influence of normal stress difference on polymer drop deformation. Polym Eng Sci 36:1647–1655
Lingaae-Jorgensen J, Utracki LA (1991) Makromol Chem Macromol Symp 48/49:189
MacKay GDM, Mason SG (1963) The gravity approach and coalescence of fluid drops at liquid interfaces. Canadian J Chem Eng 1:203–212
Minale M, Moldenaers P, Mewis J (1996) Morphological memory effects in polymeric blends, presented at the Dutch Society of Rheology Meeting, Oct 23, 1996
Palierne JF (1990) Linear theology of viscoelastic emulsions with interfacial tension. Rheol Acta 29:204–214
Rivera-Gastélum MJ, Wagner NJ (1996) A theological and morphological study of a copolyester liquid crystal/polypropylene blend system. J Polym Sci: Polym Phys 34:2433–2445
Sigillo J, di Santo L, Guido S, Grizzuti N (1996) Comparative measurements of interfacial tension in a model polymer blend. Polym Eng Sci, in press
Sundararaj U, Macosko CW (1995) Drop breakup and coalescence in polymer blends: the effects of concentration and compatibilization. Macromolecules 28: 2647–2657
Takahashi Y, Noda I (1995) In: Nakatarni AI, Dadmun MD (eds) Domain structures and viscoelastic properties of immiscible polymer blends under shear flow. Flow induced structure in polymers. ACS Washington, pp 140–152
Taylor GI (1934) The formation of emulsions in definable fields of flow. Proc R Soc London A 146:501–523
Tsai HY, Min K (1995) The flow-induced phase morphology of fluoroelastomer and polycarbonate blends during extrusion. Polym Eng Sci 35:619–636
Utracki LA (1989) Polymer alloys and blends. Hauser Publishers, Munich
Utracki LA, Shi ZH (1992) Development of polymer blend morphology during compounding in a twin-screw extruder, Part I, II and III. Polym Eng Sci 32:1824–1856
Vinckier I, Moldenaers P, Mewis J (1996) Relationship between rheology and morphology of model blends in steady shear flow. J Rheol 40:613–631
Vinckier I, Terracciano AM, Moldenaers P, Grizzuti N (1997) Flow induced coalescence in immiscible polymer blends. AIChE J (submitted)
Wu S (1987) Formation of dispersed phase in incompatible polymer blends: interfacial and theological effects. Polym Eng Sci 27:335–343
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Grizzuti, N., Bifulco, O. Effects of coalescence and breakup on the steady-state morphology of an immiscible polymer blend in shear flow. Rheol Acta 36, 406–415 (1997). https://doi.org/10.1007/BF00396327
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00396327